Electrolux Front-Load Washer Motor Control Board Replacement (part 5304515236)

Buy Part 5304515236: www.repairclin...
This video provides step-by-step instructions for replacing the motor control board on FLS627UTT
Electrolux washing machine. The most common reason for replacing the motor control board is when the washing machine won't start.
Additional stove repair, troubleshooting tips, help with finding your model number, and part replacement videos: www.repairclin...
All of the information in this motor control board replacement video is applicable to the following brands: Electrolux
Tools used: Phillips-head screwdriver or Number two square drive bit, & a T-20 Torx bit.
Connect With Us!
plus.google.co...
/ repairclinic
/ repairclinic
/ repairclinic
Join our free VIP email list for discounts and money-saving tips: tinyurl.com/pnn...
Check out our blog: www.DIY.RepairC...
Don't forget to like and comment on this video, and subscribe to our channel!

[@caliguy1500]

For anyone watching, you might not need a new control board. My washer was not spinning or agitating. Diagnostic mode showed Error E5a high temp/overload. I tested the motor for resistance and it passed. I took out the motor control board and removed the 4 Philip screws and seperated the two circuit boards. The boards have a set of contacts that use spring tension to maintain contact when screwed and sandwiched together. I noticed the contacts seemed fatigued so I gently bent them back out and reassembled everything and its been working great now.

[@fabriziolecci8364]

i was about to get a new washer then tried your trick. worked! thanks

[@neilclaringbould3907]

just fixed ours, exactly the same problem. wife is happy now. thanks.

[@girohead]

great vid, Instead of removing the entire rear panel, I removed only the access shield within it (like and oval with two screws, saves 1/2 the time, just a little tighter.