⚠️ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕ PayPal: paypal.me/sdaspay Patreon: www.patreon.com/techstudycell
I check out the pcb it was for 7 dollars but the shipping fee is 40 to 50 dollars, for how much did you bought the customized pcb(5 quantity) shown above
To connect more lamps you need a hub or server, por example the program home assitant in raspberry pi, and the custom firmware tasmota, and devices with esp8266 like sonoff to control outputs for control infinite lamps
I'm having a problem, idk if is something in the code or what could be the problem but the comands are backwards, when I say turn off the lights they turn on and when I say turn on they turn off, help me pls
Sir it is the perfect video for home automation till now with Google and Alexa both but fan speed is missing somewhere pls try to make it , any how I liked this video very much
Hi sir how are you I am a new viewer for your channel this project is very useful to me but the on and off comant in change ON comant light is OFF OFF comant light is ON
Hi from Czechia, thx for videos..... But this is exactly what I need as a time relay, to automatically turn on different channels at a set time? Can you recommend software for this? Thanks
does it trigger the relay if there is no internet in a loop ? which happens to me while using Blynk, if modem is off, the relay will trigger every 1 minute.
can you tell me what the 4 edge hole is called and what is the purpose of its? I want to screw it in pcb instead of soldering it using that 4 holes. is it feasible? please reply
Everything is done ok .3 Devices are seen on sinic pro and in alexa and google home successfully linked but it reports devices un responsive both in Alexa or Google home. they are always shown as device is offline in sinric pro, alexa and google home. It does not show the wifi connected on the serial monitor but Wifi LED blinks in regular intervals on the NodeMCU that I use of version 3 from LoLin. The same NodeMcu but worked perfectly on your Blynk code showing wifi connected..
This was also reported by and I am having exactly the same problem even after following your solution. I use no switches atall. Marcio30 OCT 2021 REPLY Hello your project is excellent. I’m trying to do it for my house, but after loading the code for ESP8266, it keeps restarting. do you have any tips to solve this problem? I have already used another NODEMCU. SerialPrint: below. ets Jan 8 2013,rst cause:4, boot mode:(3,6) wdt reset load 0x4010f000, len 3584, room 16 tail 0 chksum 0xb0 csum 0xb0 v2843a5ac ~ld Subhajit13 NOV 2021 REPLY make sure the D3 and SD3 pin (i.e switch1 and switch2) are not connected with GND. all switches should be OFF when you BOOT the NodeMCU
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
⚠️ This video took a long time to make if you would like to buy me a coffee to say thanks, link below: ☕
PayPal: paypal.me/sdaspay
Patreon: www.patreon.com/techstudycell
Just joined your Patreon monthly. Great stuff! I have some questions - let me know if your coffee comes with conversation as well!
Can you make video for esp32 and 8 channel relay using sinric pro
Sir plz send live photos of installation
How can I talk to you in private?
I check out the pcb it was for 7 dollars but the shipping fee is 40 to 50 dollars, for how much did you bought the customized pcb(5 quantity) shown above
Dude! Thanks for turning on all the lights in my house less than 5 minutes into your video!😂
Your videos are an awesome treat !!!❤️
Thanks for the feedback
Bhagwan se to dar mere bhai
You are really a PRO bro 😎
Thank u brother for making this video . ❤
You are welcome
Bro cp2102 ke liye driver install kese kare pc win7 32bit
Excellent work bro super pentastic , and congratulations bro
Thanks
Buenos días, perdón por no saber inglés. Mí pregunta es ¿éste sistema funcionará con Alexa o con Google, sin tener el servicio de internet? , gracias
yes
Works like a charm! Thanks for the video, it help me a lot!
Hlo
To connect more lamps you need a hub or server, por example the program home assitant in raspberry pi, and the custom firmware tasmota, and devices with esp8266 like sonoff to control outputs for control infinite lamps
Yes
Please Give detailed information about how to download all the libraries of Arduino ide and sinric pro
Explain all this in the video itself it becomes much easier to
Best Home Automation video...... Keep it up!!
Thanks
@@TechStudyCell
Hey can we control things independently
@@TechStudyCell Can you please tell me the board dimension?
Great video dear👍
Thanks
can you tell me about software for designing PCB.? please.
Very good content !!!!!!!
👌🤙💪
👏👏👏👏👏👏
Excellent one.... suitable price range of needed components is best suited to one's budget 💯
Thanks for such creative projects..
Thanks very much. This works for me. Continue with the good work
I'm having a problem, idk if is something in the code or what could be the problem but the comands are backwards, when I say turn off the lights they turn on and when I say turn on they turn off, help me pls
I am having the same problem. We may have to edit the code.
same problem bro
Nice tutorial but is there any diagram for 8 to 16 lines or what is the max line that NODE MCU can handle? Thank you for the response
1 node Mcu can handle max 4 connection
please help ,how to download the sinricproswitch library in arudino software
i face a error Compilation error: SinricPro.h: No such file or directory
Please install the library
@@TechStudyCell yes its work
@@gursagarsingh1328llo brother did your project worked?
U R a real professional 😉
Thanks
Awesome 😎👍🏻
Thanks
I have 2 channel relay and i only want to add two switches what changes should i do in the code + in the circuit diagram
it is important that both esp and your phone must be connected to same wifi? in order to communicate with google home
How to download board and libraries
Hi
Thanks for very good
Does any of those module work with zigbee ?
How to make voice automation with esp32 works on Google without any 3rd party app or website like not using IFTT AND SINRIC
lol my google assistant understood your command it's kinda amazing considering it as a hard time with my own voice?
Sir it is the perfect video for home automation till now with Google and Alexa both but fan speed is missing somewhere pls try to make it , any how I liked this video very much
Thanks. Noted. But it will take time.
can i use relay for my water motor pump?
How to tackle back emf issue with connecting inductive loads like ceiling fan
What is that JD component on PCB?
You have to place a jumper across JD and VCC
Hi sir how are you I am a new viewer for your channel this project is very useful to me but the on and off comant in change
ON comant light is OFF
OFF comant light is ON
Can we do project with relay, nodemcu and switches only and removing transistors, resistors, etc as it needs electronic knowledge
Awesome Sir 🔥💯
Thanks
Can we use it on 440 volt, 3 phase motor?
Is sinric pro doesn't have any limit or retention for the 3 device button
Is it full free
Can we do it for DC supply
Ya components dc current ky liy use hoty ac current ky liy kon sy components use hoty
Do we connect 8 channel relay to esp12e board oor it can be controlled by switch, voice please tell me
sangat menginspirasi bang bagi pemula seperti saya
Bro I have esp8266 but it is cp2102 and have not 5v pin it have 3v pin can it work
hey man! please add a mini oled screen for switch on/off status!
Can esp 32 c3 have the work done
Can we use node mcu with the place of msp32
Hi, I have a question, I need to used LCD so I need ports D1 and D2, but they already been used, so wha should i do.
Which jumper wire is being used??
thank you for sharing this video it was very educational and we are eager to try this at school
Can we use 3 to 4 Mobile phones with one nodmcu Cerkit
Thank you for this project.
Our pleasure!
Which type of power supply you are using?
Sir can you please tell me where did you upload that code during that upload section
Can we connect esp 8266 to Google, alexa , blink app and push switch?
Yea cool but power it from the same circuit it controls or it's less waste of batteries.
Please which programming and courses should be learn to become like you ad professional thanks 👍
Hi from Czechia, thx for videos..... But this is exactly what I need as a time relay, to automatically turn on different channels at a set time? Can you recommend software for this? Thanks
which component you placed at VCC JD in the pcb. please tell the name of that component.
If you use 5V relay, Just connect VCC JD and VCC with jumper.
Much waited video
Hellow, can i use that pcb to my own application?
Thank you so much sir. It really helps me.🙏
Glad it helped
Thank you so match for your video
We can insert old phone charger pin for program in node mcu ah bro pls tell pls respond bro
what is the Vcc - JD in the PCB ...pls explain me URGENT !!
I like your video. I always want to setup home automation and now i can try. Thanks for sharing.
Go for it!
If use a smart google nest . How to setup it?
Can we add remote control also?
Is it possible to get one number pcb which you used in this project. If it so please give the link for purchase with details.
Bro can the rellay withstand the power of a regular home water motor
What modification I want to made with the coding if I didn't uses the switches
How to make an app(which connects the hardware online)for this circuit .
Excellent project,keep it up. Sir please make fm radio using node mcu esp8266 ,your explanation is very clear, thank you in advance.
Ok. Thanks
Can you please share the source of circuit diagram i need to change relay dimensions to get pcb printed
hei bro, excellent work, i don’t know where i made a mistake instead of lights turning on when i say turn on they turn off and vice-versa
very good, is there a voice support version in Vietnamese?
Sir , how to make that type of circuit picture???
does it trigger the relay if there is no internet in a loop ? which happens to me while using Blynk, if modem is off, the relay will trigger every 1 minute.
it work on wemos d1 mini?
Awesome project Sir. I will try my level best to make it sucess.
Very very impressive sir
Thanx from Morocco
khoya wach khdem lik mzyan?? khani n9dm projet ista
can you tell me what the 4 edge hole is called and what is the purpose of its? I want to screw it in pcb instead of soldering it using that 4 holes.
is it feasible?
please reply
No
What u have studied for pcb making
Please say me bro how to connect the lines to the lamps bro. I don't know about basic wirings knowledge
That is regular AC switch or no ?
can i control iot using my own voice assistant mode
Very good job !!!
Everything works!!!
Thanks
Did you try this project ?
Thank you for making such awesome videos, if possible please help making a combined circuit with light and fan controller as it will be really helpful
Noted.. Thanks
Everything is done ok .3 Devices are seen on sinic pro and in alexa and google home successfully linked but it reports devices un responsive both in Alexa or Google home. they are always shown as device is offline in sinric pro, alexa and google home. It does not show the wifi connected on the serial monitor but Wifi LED blinks in regular intervals on the NodeMCU that I use of version 3 from LoLin. The same NodeMcu but worked perfectly on your Blynk code showing wifi connected..
This was also reported by and I am having exactly the same problem even after following your solution. I use no switches atall.
Marcio30 OCT 2021 REPLY
Hello your project is excellent.
I’m trying to do it for my house, but after loading the code for ESP8266, it keeps restarting. do you have any tips to solve this problem?
I have already used another NODEMCU.
SerialPrint: below.
ets Jan 8 2013,rst cause:4, boot mode:(3,6)
wdt reset
load 0x4010f000, len 3584, room 16
tail 0
chksum 0xb0
csum 0xb0
v2843a5ac
~ld
Subhajit13 NOV 2021 REPLY
make sure the D3 and SD3 pin (i.e switch1 and switch2) are not connected with GND. all switches should be OFF when you BOOT the NodeMCU
Please urgent assistance needed.
What is the VCC used and where can I get it
Hi, the ESP8266 so near with relay didn't cause the EMI problem because of the AC power line?
Bhai aap se baat kar na hai kai se Kare...................... please please
Great tutorial bro, Can you make more advanced tutorial using sinric pro ?
Something like blinds, sensors, send ir codes etc.
Noted. Thanks
Still waiting for fan Speed control ❤️
@@yogendrajamsariya1193 I believe you are using sinric pro right ?
Go to examples there's a fan example test it.
@@yogendrajamsariya1193 I'm too busy these days, just give me some time and I will give you the best solution for your problem bro.
@@nightwing8164 😉 I am waiting bro ,
3:24 can you provide me the file so i can directly order the PCB. PLEASE
Hi bro, can you trigger a audio file (USB) with sonar sensor using NodeMCU or ESP32... Reply will be solicited.
How can I add AC voltage switches which can control lights manually without powering the NodeMCU and relay
can we connect tihs to python if so pl bring a video about it
Please sir .... Suggest me that course what u have studied
is it working the manual switches if the nodemcu not connect in wifi?
I don't have 5v 5amp power supply so can I use 24V dc power supply with 24v relay module...??? Please reply sir
ruclips.net/video/jBY-unH9oiw/видео.html
If you order to turn on, and It alread on, what its back? Turn off, turn on(mean do nothing) or answer "its on"?