How to change Air Nozzle for CYMA CGS Gas Blowback Rifle (TECH WORK!)
HTML-код
- Опубликовано: 2 окт 2024
- Changing the nozzle on your CYMA CGS or your Tokyo Marui MWS can be complicated when it comes to small amount of parts. Hopefully this video can help get straight down into the bone and help make your next gas blowback rifle Tokyo Marui MWS Magazine compatible! Check out the nozzle set on our website at airsoftmaster.com!
Unicorn Airsoft MWS Nozzle Set:
www.airsoftmas...
hi, I'm new to gb, my nozl crashed, will a regular nozl from mws be suitable or do I need a nozl from t8?
Hello! sorry for the late reply! You can use a regular nozzle from the mws but the only issue is you may need to replace the nozzle return spring on the mws as they have a tendency to break. I would recommend changing the nozzle spring before installing into the bolt carrier group! Hope this helps!
Hi! I have the CGS N4 with this same system. Why does the hammer assist need to be removed? And can the stock nozzle be modified to not chew up gunsmodify routers?
EDIT: I guess the nozzle guide piece as well? Just to match it up to MWS?
Hello! So in regards of the nozzle guide piece would not fit due to the fact it's too long for the original bolt carrier group. The issue as well to the hammer assist using the unicorn nozzle does not have any threading for the hammer assist. Also the fact the hammer assist would make the nozzle return spring be a bit too short to secure. Which is why I would use the C- clip to hold the nozzle return spring.
Hi, hope everything is good. I've been looking for that pdw stock for my cgs ddm4. Can you please help me?
Where did you buy it and which of all the pdw stock for gbb you installed?
I've been investigating, and the most similar to that one you installed is the 5KU Retractable CQB Stock for Marui MWS M4.
Please if you can put the link below I will appreciate it. I've been looking and investigating like crazy to find a compatible one for the cgs ddm4 pdw.
Hello sorry for the late reply! so for my personal build of my DD PDW I had to order the stock from overseas, but here is a link in regards of where I got one!
shop.jkarmy.com/5ku-iron-pdw-stock-for-mws-gbbr-black.html
Hope this helps!
Is it possible if we upgrade trigger box + bolt CGS using MWS like from guns modify?
Unfortunately no because of how wide the cgs trigger box is. Be careful as it can break your receiver. Use a gunsmodify trigger box as it is narrow enough to fit most lowers
Man! I havent been to the store in years!!!!
I belive since the g&g rk74 released.
And yes i bought it from you guys
welcome back! to answer your question yes I still have my G&G RK74 as well lol.
Very good videos! I am a newbie in the GBBR world. Your videos are very helpful.
Will a Guns Modify Modified Reinforced Drop-In Complete Nozzle Set for Tokyo Marui M4
MWS Gas be compatible with the CGS magazine that came with the unit?
Hello! It is compatible to the cgs system. But unfortunately one thing I notice is that it sometimes crushes bb’s inside the chamber :/ My most recent test was using the Daniel Defense Pdw CGS gbbr version. So far I’ve been doing well with the unicorn full nozzle set.
Thanks for the quick reply!!!
I noticed that my all stock CGS DD MK18 crushes BB once in a while 😢
hi, I'm new to gb, my nozl crashed, will a regular nozl from mws be suitable or do I need a nozl from t8?
Hello! so in regards of a regular mws nozzle you can use it to help fix your crushed nozzle. The only issue what I've seen with rifles is that when changing to a different nozzle, it does somewhat change the magazine compatibility for your rifle. If you have EMG magazines for the cgs please do be mindful when changing nozzles.
hmmm, so I do notice that sometimes when a nozzle does that it has an issue with the alignment from a bolt carrier group. :( by any chance have you change the nozzle or is it still the OEM nozzle that came in the rifle?
sir make a video about the G&G mcgr upgrades for higherr fps have a great day!
I will see what I can do in the name of science and the gas blowback wizards! *adjusted glasses*
@@AirsoftMasterTV thanks! ill wait for this updates