Guide for installing a new Nozzle in a Tokyo Marui MWS GBBR (Airsoft)
HTML-код
- Опубликовано: 7 сен 2024
- just a quick but necessary video just covering off how to change the nozzle in an MWS rifle.
#airsoft #tokyomarui #mws #upgrade #guide #nozzle #improve #improvement #better #tm #marui #tokyo #zincalloy #zet #zetsystem #m4
So chuffed you have done this! Got a mws l119 a few months ago and it’s my first gbbr so all your videos help a lot! Keep up the good work
Thank you I really appreciate your support. Loads more MWS stuff to come too 😁
Thanks for the video, my return spring snapped last weekend and your guide ensured I replaced it with zero issues.
Yes! More of this kind of caper please Ollie! Had to replace the nozzle return spring in mine recently and it was an absolute James Blunt when it came to removing the roll pin from the firing pin! Any guides on replacing the known perishables is appreciated 👍
The only thing that helps is the right size of punch, I got a set from eBay. Totally worth the few quid it cost me and I use the all the time.
@@OllieTalksAirsoft funnily enough I finally ordered a set of roll pin punches that were delivered today, along with some watchmakers screwdrivers. No more whacking a tiny allen key with a pair of pliers for me 👍
@@Steve_281 well never say never 😂
Great video mate! Just got myself an mtr16 and love learning about the mws platform 👍
Thank you 😊 loads more to come!!
9
Hi Ollie, just to let you know that thanks to your amazing explanations I just did my first bolt carrier’s rocket valve replacement and went super smooth 👍, awesome , keep going bro… your videos are straight forward with no bullshit , this was on an angry gun Gen 2 ( mpa ) bolt carrier, the issue in this design is that if you wish to have the max power, the screw needs to be unscrewed to the max ( with thread locker on it ) and it barely holds on the original rocket valve, I even add some of the thread locker and that screw went flying 2 times through the barrel, I finally opt to replace that valve by a HP valve from MWC, and it works perfectly now, In my opinion this mpa is not designed properly… even could eventually damage the internal parts should it detached from the rocket valve, just to share…
I followed this guide to replace my nozzle and nozzle springs. As I was getting strange malfunctions where I was sometimes not just double, but triple feeding. Imagine that. Went through two shattered nozzles before I realised it was a really bad case of bolt bounce. Live and learn, I guess. Thanks Ollie.
Wow that's one hell of a bounce!! Looks like a change over to a moving buffer like the g&p is in your future, often the moving parts buffers are shorter so don't forget to fill the buffer tube so the bolt doesn't contact your upper! Glad you got to the bottom of the issue too, sometimes it can be a nightmare to locate the issue!
@@OllieTalksAirsoft Yeah I got a new buffer kit in the mail. (While I was there i picked up a high speed bolt as well. That was already on the cards anyway so.)
Thanks for the guide. My brand new mws's nozzle took some minor scuffs from a double-feed because I didn't realize It managed to load a new round in when I ran out of gas. Crazy thing Is, I only found out today after shooting it a whole bunch and taking the bolt out to lubricate the internals. And during that shooting session I only had a failure to enter battery due to mag cool down the internals being a little too dry.
They're great aren't they, they just want to work!!
Ordered the gun last week and I was suggested to watch your channel in AFUK. Decent videos dude, keep up the good work! Will do the upgrade when I have it!
Thanks buddy I really appreciate it 😊
This video helped out a lot, thankyou so much😭🙏🏻🙏🏻🙏🏻
glad you found my channel, its all about helping people out 😁
THANKS BRO
Gracias!! tenia una duda con una de las gomas internas y un muelle y esta todo muy claro,, gracias por tu aportacion
I really hope Ollie is doing well from cancer.
Hey Ollie, nice video, how do you go about checking the seal at the back of the nozzle? The little o ring and piston seal. When you pull out the nozzle out of BCG and block gas holes and try to reinsert to BCG you should feel resistance, but I do not, nor my friends MWS does this. Although we tryed another test, taking all bcg by the nozzle vertically in the air, bcg hanging down, block gas router hole, and make a vacuum with your mouth at the front of the nozzle and by sucking the BCG should come back up (creating vacuum), friend’s does this, mine does’nt, I am lost, should I be replacing something? I get a lot of gas venting during low gas pressures (cold)
Great vid as always, do you have e a vid where you walk through how.to change the nozzle return spring and which one would you recommend? Cheers!
Probably the guns modify one. Yeah I can do a video guide no probs.
@@OllieTalksAirsoft that would be great pal when you get the chance cheers!
I am in dire need of help Ollie, I need to put the gas valve thing that has the spring back into the nozzle and it has one big openings and two smaller openings. I couldn’t quite see yours in the video so which one should be face the gas hole so that it accepts gas? Should I have the big one facing out or the two smaller ones split between it? 5:03
Ollie, my Poseidon Ice Pick came w a spring and a rubber o-ring. Looking at this video to try and figure how to install it, where does the o-ring go?
I've got one in the mail to test so I'm going to find out and I'll do a video about it. Doesn't seem like it would need one tho
@@OllieTalksAirsoft I believe it goes on the end where there is a little indention on the head of the valve to help seal it. That’s what I did and it works fine. Matter of fact, it’s working too fine, too high of FPS. I’m shooting about 1.6-1.7J now. I have an adjustable NPAS in the mail, so I’ll probably pull the Ice Pick out and use it for DMR
Soooo helpful!
My guy Ollie nearly on 1000 subscribers!! Really cool video, I take it the nozzle return spring isn’t an OEM part also?
I think it might be actually but the ends are definitely G&P. Tbf the spring breaks easily so it's likely an aftermarket one. Cheers buddy it always makes my day when you pop up ☺️
Likewise! I love the MWS platform and all things GBB, so I always look forward to your content! 💪
I’ll need to get some replacement springs as spares, been quite fortunate that none of them have failed on mine, even my first MWS which is coming up for 4 years old!
Still on the hunt for AKM mags, no news on when more are coming out 😭!
@@Slmf_skambo I saw impulse 101 have the AKM back in stock now, still no mags but I'd expect to see them soon if the guns are back in stock.
@@OllieTalksAirsoft we’ll have to find a way to meet up, I’m located in the south east, and get the GBBR’s out! 💪💪💪
@@Slmf_skambo agreed, I'm over Bristol way but have family in Norwich so I'm sure we can make something happen over the summer 😁
mate did you polish the bolt? i was looking for silver looking bolt , but if i can polish my original one to get it like yours would be amazing :D
yes I did, didn't come out to a mirror shine like I wanted but I still think it looks great
awesome! im gonna do the same! you made me save 180 € :D@@OllieTalksAirsoft
I just cracked mine open to replace the spring and i see an already installed aftermarket return spring that is significantly shorter than the DP one i was gonna install. With the current unknown one installed the tip of the metal section only just sticks out of the black casing by 1mm. Are shorter return springs a thing & is this okay to leave in the system or has someone installed an incorrect part?
Hi Ollie, recently bent my nozzle as well and with no where having the stock TM nozzle in stock i was looking at the guns modify and KG nozzle. Wondered what your thoughts were
The AG one is a bit shit to be honest. I've not had experience with the KG nozzle personally but it may be worth checking with people on the TM discord as someone will have used it before. Let me know if you need the link.
What nozzle recommend me in stock bolt, my stock nozzle breaks and i have a GM lower receiver
id say probably the GM is the best aftermarket that's not too expensive.
Hi Ollie, do you know the names of the part you touch at 8:03 ? It breaks during a train session today... i got a npas in here (angry gun one) I think that it was too open so too much fps I think ? Thanks a lot.
its the fake extractor, its a plastic piece, the original TM one is good, the aftermarket Angry Gun one is awful and breaks almost immediately, the gun doesn't need this part to function, it just looks cool.
@@OllieTalksAirsoft so I can remove the little spring and the fake extractor too without any problem ?
Quality vid buddy 👌
Cheers buddy
hi Ollie :)
Am installing < new spring(nozzel) from gunMod. But I think its rather short...
so i need to like thread it though with at sawing tread....it donent pop out after i applie the rubber... however strange it sounds wrong...
I wouldn't worry about the length, they work fine. ive just done a video about the nozzle spring and some other mws related stuff.
Out of curiosity Is there any reason you haven’t been using something like an NPAS for the mws system?
I've just never had much luck with them, No idea why, most likely user error but I can never get the FPS stable enough. I always get 20-30 FPS fluctuations but with a standard setup I can get sub 10 FPS variation. I know some people have had more luck and I'm not against NPAS, I'm just an idiot 😂
@@OllieTalksAirsoft I feel that way all the time upgrading things, I know angry gun has a drop in nozzle system that’s got it built in and I’m tempted to pick it up
@@Pathoz the lugs that hold the extractor price in place broke off mine, bit annoying. Does still work tho, although I think I took it apart and it doesn't adjust properly any more 🤣
Good day mate! I really need your help. I bought mws a few month ago and it worked perfectly. But when I changed inner barrel and hop up rubber, my accuracy became so disgusting. No single bb hit straight. Maybe I damaged hop up unit or smth else. Also couldn’t find any info about this problem. If u have some idea pls reply. Thanks in advance! :)
Is it actually hopping the BB's ?
Also what Inner barrel? Brand and length, and what hop rubber. I assume a stock hop chamber and arm?
So it could be as simple as silicone oil on the hop rubber, either way you'll need to take it apart and have a look at the parts. Maybe switch back to the stock rubber for a while and just feel the benefit of the upgraded inner. Hop rubbers are cheap and sometimes not great, TM stock ones tend to be very good.
@@OllieTalksAirsoft to be honest this problem appears when I first time disassemble the rifle. Even with stock rubber and barrel bb run out with 0 accuracy. Also i noticed this rubber hill inside chamber shifted a little bit to the left on every rubber what I use (stock also).
@@Tpycuku_ I think take it apart and re-assmeble making sure the hop is off the whole time. If the hop is turned on when the barrel is re-installed then it caused the issues you're talking about.
Hi Ollie, my nozzle return spring broke yesterday.... I've seen there's a few different replacements on the market. What do you suggest going for?
Probs Guns Modify of DP are the easiest to get.
ollie so youre saying that theres a high and low power mode??
also ollie, does the high power and low power effect any recoil?
So the g&p nozzle has 2 holes which are effectively high and low power by moving the rocket valve back and forth. Doesn't change the recoil sadly
@@OllieTalksAirsoft i have an mtr16 and im planning to change the nozzle due to the gas efficiency being terrible
You said about upgrading some springs and parts in your rifle due to using more powerful gas, what parts do you upgrade exactly because there are lots of springs online and it is very confusing
The spring that breaks is the nozzle return spring, the guns modify one is a great aftermarket replacement and pretty easy to fit. Also it's cheap.
Basically the nozzle returns too fast and compresses the spring causing it to break. I'd pick up the GM replacement and it should be good for years
@@OllieTalksAirsoft Wow, thank you for the quick reply!
Nice ! 👍
Thanks buddy ☺️
Hi ollie have you tried the aluminum nozzle?
yes, its pretty nice to be fair, I have the volant and need to make a video on it
What if the nuzzle get stuck in an extended way in the bolt carrier, and 1 in 30 times it goes back in place. I mean, a few hundred bbs on a new gun? Is it suppose to be like that? So, everyday i use it it will be destroyed internialy?
It is a new tokyo marui gbbr mk18 thought this was going to be the better stuff
That's very strange, I'd send it back to the retailer if it's a new gun, I've heard the most recent Mk18s have had some QC issues which is unusual for TM. It shouldn't be doing that
@@OllieTalksAirsoft na, I have learned alot by now. It likes to jam these gunes in a misfire, although it broke down today i fixed it myself again, the spring in the nozzle was cutted off so I bent a new cirkel and it is alive
@@OllieTalksAirsoft now I have ratatatatata 10 000 bb's😆
would that system work with the TM Type89 GBBR "G&P rocket valve" ?
I may try and see but I don't know off the top of my head.
@@OllieTalksAirsoft Grate let me know if you do as I would like to put into my type89
is that the g&p5mm walve??
Yeah the old red one before they made them adjustable
Can you make a small guide to the most powerful setup.
Mabye just email it to my. You all ready got my mail.
R. From Denmark
I got it lying on my desk but not sure how to install it to get the most powerful
what do you use for lubricant?
Just a light silicone spray, keeps everything moving fast!
@@OllieTalksAirsoft thanks, any you can recommend? Do I need to spray anything on the nozzle? Or just the outside of the bolt.
sorry for the slow reply, on the outside of the bolt and if you pull the nozzle out a bit and spray towards the back then that'll do it.
Gotta get it in the right hole ;-)
😂