TAB Performance Indian Header - Install Instruction Video

You will see step by step instruction on how to install a TAB performance headpipe on your Indian TS111 or any TS116 with fin covers. This header covers all Indian TS111 and TS116 models from 2014-2020 as well as the 2021 Indian Springfield Darkhorse models. All other 2021 models are a new style header, watch out and follow our channel to stay up to date for the new model header.
www.tabperform...

[@mafosa8519]

Seems like that would have been a good time to swap cams.
Really great share dude!
Larry

[@silentlystacking1167]

What kind of performance does it off over jackpot head pipe from a Indian rider

[@augustdrums1247]

Can you do this without taking the front portion off?

[@TABPerformance]

I haven't tried but I would doubt that is possible.

[@shawnbrooks9642]

Rock on! music not loud enough to hear over my zombie pipes!!!

[@robertemmons2260]

Damn good looking bike!

[@vapinvader3596]

I have a 23 chieftain with the stage 1 pipes intake and tune from indian, how much would this affect the power without a retune? Because no one touches indians around me..

[@TABPerformance]

Without a tune, I would not recommend this type of upgrade. However if you are comfortable with a header install, dynojet can help with a tune without needing a dyno. www.tabperformance.com/2014-Up-Indian-Motorcycles-Power-Vision-tuner-p/indian-power-vision-3.htm

[@timz7171]

you recommend a different air breather with this install?

[@TABPerformance]

If you are just wanting to dump heat and gain some sound, it isn't necessary, but it will help with performance and some with cooling.

[@Zest81]

What size did he say was on the pipe clamp?

[@giovannicalicchio8277]

Anyone know what size flange bolts are on the 2020 Indian challenger?

[@johnsikora6043]

Do these mufflers require any engine modifications?

[@TABPerformance]

Anytime you change the exhaust or intake we recommend a tune, especially when you mess with the header.

[@davidrobertson4538]

I can’t find a video yet that shows how to remove the covers to get to the exhaust bolts on the heads. I’ve removed the two that are known but there has to be one more because it’s not moving

[@Paul-ce7jl]

no only 2 the rear are jut 2 pins mine were corroded put on some release agent

[@bgrides2108]

Great video.

[@TABPerformance]

Glad you enjoyed it

[@hexen501]

What are the torque specs for those header bolts my dude?

[@antlocal80]

I think it was 15ft lb

[@briandrake496]

Great video but music was annoying!!!

[@josephn2391]

Do not attempt this without a lift. 23 roadmaster is damn near impossible to change this out

[@JamieTaylor-mo1cx]

Because the music is not annoying as hell and makes it more difficult to hear what you’re saying.

[@frankfortmarine]

ditch the music.

[@KerryJackson-kg7cs]

Get rid of the music so I can hear what you are saying

[@planedr]

Music too loud.