[AP3D] Slope Line Modeling (Piping Slope) & Modeling with dimensions up to the flange face
HTML-код
- Опубликовано: 21 авг 2024
- #AutocadPlant3d #pipeslope #piperouting #plant3d
Tip
A. Compass , Elevation & Routing , Slope
1 Ctrl+Right Button (Vertical Compass) 2. Elevation input (BOP & Elevaton snap On)
3 Ctrl+Right Button (Horizontal Compass) 4. Slop Input :
배관 모델링 방향으로 배관 높이를 낮추려면 음수를 입력합니다.
Enter a negative number to fall the PIPE height toward the pipe modeling
B. 플랜지 면 까지 치수에 맞춰 모델링 하기
Modeling with dimensions up to the flange face
1. Tool palettes 말고 "F" 입력해서 components 창에서 플랜지 선택
Instead of using tool palettes, type "F" to select the flange in the components window.
2. orieNtation "N"
3. Basepoint "B"
C. SLOP Line Branch Connection
STub-in "ST" : Stub-in=On
D. Slop Line TEE Branch
티 먼저 모델링 한 후 티 에서 부터 배관을 이어 모델링 해야 함
The tee must be modeled first, and then the piping must be modeled from the tee.
thanks!
You're welcome 😊
what's the program do you use?
AutoCad Plant 3D 2024 😀
www.autodesk.com/products/autocad/included-toolsets/autocad-plant-3d