AP3D-KH (AutoCAD PLANT 3D)
AP3D-KH (AutoCAD PLANT 3D)
  • Видео 93
  • Просмотров 135 705

Видео

[AP3D] Added P&ID Class & Tool Palettes
Просмотров 1162 месяца назад
#AutocadPlant3d #P&IDClass #Toolpalettes 1. Open "projSymbolStyle.dwg" (Project Folder) 2. Block Editor (Block Save as) 3. File Save & close 4. Project Setup - P&ID DWG Settings - P&ID Class Definitions - Engineering Items - Instrumentation - Inline Instruments - Level Measurement 5. Add Symbols - Selected Drawings (...) - Available Blocks - Add - Next 6. Input Symbol Name - Finish 7. Add to To...
[AP3D] Tutorial P&ID Valve , Control Valve , Strainer , Reducer...
Просмотров 2133 месяца назад
#AutocadPlant3d #Pnid #Valve # ControlValve P&ID :)
[AP3D] P&ID PIPE LINES LAYER SETTING
Просмотров 4077 месяцев назад
#autocadplant3d #pipelines #p&id 1. Project Setup - P&ID DWG Settings - P&ID Class Definitions - Engineering Items - Lines - Pipe Line Segments - Primary Line Segment 2. Edit Line Layer & Color Setting *To add a layer, just add a layer by adding it to \project folder\projSymbolStyle.dwg or modifying the symbol with a block in project setup.
[AP3D] Tutorial P&ID Line Secondary
Просмотров 3127 месяцев назад
#AutocadPlant3d #P&ID #LINES Paint P&ID
[AP3D] Tutorial P&ID Primary Line (Create AP3D intelligent P&ID based on existing 2D Cad P&ID)
Просмотров 3168 месяцев назад
#AutocadPlant3d #p&idTutorial #primaryLine Equipment Nozzle (Scale & Edit Symbol) Line Size Tag (Annotate)
[AP3D] Tutorial (A. Equipment - Create AP3D intelligent P&ID based on existing 2D Cad P&ID)
Просмотров 4118 месяцев назад
#AutocadPlant3d #EquipmentP&ID #P&ID #IntelligentP&ID 2. Create AP3D intelligent P&ID based on existing 2D Cad P&ID - Exist P&ID Copy * Selection - Convert to P&ID Object (PIDCONVERT) - Classes definition A. Equipment Specify insertion base point B. Lines (Equipment Nozzle) Insulation , Line Condition C. Valves & Fittings (Not to rotated Specify insertion base point D. Instruments E. Non-engine...
[AP3D] Tutorial New Project (Project Setup, List Property, Line No.Tag)
Просмотров 4378 месяцев назад
#autocadplant3d #Listproperty #Newproject #Projectsetup 1. New Project Name : SAMPLE (STABILIZER AREA) Units : Metric - Inches (Mixed Metric) , P&ID Symbology Standard : PIP 2. List Property (P&ID, P3D) Spec : P1 (CS 3.2 ASME 150 # RF ~232) U1 (CS 1.6 ASME 150 # RF ~232) U2 (CS 2.5 ASME 150 # RF ~400) U3 (CS 1.6 ASME 150 # RF ~399) U4 (304L SS 0.8 ASME 150 # RF ~149) U2G (CS 2.5 ASME 150 # RF ~...
[AP3D] Project Line no. Setting (P&ID, 3D Model, Isometric)
Просмотров 7369 месяцев назад
#AutocadPlant3d #Mapping #LineNo. #PipeLineNo. #Isometricdwg Project Line no. Setting LINE NO. : 6"-P-1001-10HC01-IH(50) Size-Service-Line Number-Spec-Insulation(Insulation Th'k) Default Setting 1. P&ID Line Tag - 6"-10HC01-P-1001 : Pipeline Tag - IH - 50 : Insulation Label 2. Mapping (Pipeline Tag No.) P&ID Line no. : 1001 (Line Number Only) 3D MODEL Line no. : 1001 (Line Number Only) 3. Isome...
[AP3D] Create Equipment New Horizontal Pump (Add Shape)
Просмотров 5369 месяцев назад
#AutocadPlant3d #Equipment #pumpkin Create Equipment New Horizontal Pump Add Shape :)
[AP3D] Slope Line Modeling (Piping Slope) & Modeling with dimensions up to the flange face
Просмотров 2,4 тыс.9 месяцев назад
#AutocadPlant3d #pipeslope #piperouting #plant3d Tip A. Compass , Elevation & Routing , Slope 1 Ctrl Right Button (Vertical Compass) 2. Elevation input (BOP & Elevaton snap On) 3 Ctrl Right Button (Horizontal Compass) 4. Slop Input : 배관 모델링 방향으로 배관 높이를 낮추려면 음수를 입력합니다. Enter a negative number to fall the PIPE height toward the pipe modeling B. 플랜지 면 까지 치수에 맞춰 모델링 하기 Modeling with dimensions up t...
[AP3D] How to use routing offsets (Set Route Line)
Просмотров 94410 месяцев назад
#autocadplant3d #piperouting #routingoffset #setrouteline How to use routing offsets (Set Route Line) Tip) 1. Viewport 2~3 2. (Continuation grip) Pipe Extention (osnap mode : Shift Right Click) 3. Compass (CTRL Right Click) 4. Change Routing offset Note : Must check the Compass Plan :) before changing the Routing Offset (Set Route Line).
[AP3D] Create catalog & spec (feat. Catalog Builder)
Просмотров 96811 месяцев назад
#autocadplant3d #CatalogBuilder #SpecsAndCatalogsEditor #cata 2배속 권장 합니다. ^^;; Recommend watching at 2x speed. :) 1. Catalog Dimension Table (EXCEL File) 2. Catalog Builder C:\Program Files\Autodesk\AutoCAD 2024\PLNT3D\AutoCADPlant3DCatalogBuilder.exe AP3D Installation Folder Or Spec Editor - Tools - Launch Catalog Builder 3. Create new - New Folder (Subfolder to Shared content folder) 4 Settin...
[AP3D] How to model TEE?
Просмотров 46711 месяцев назад
#AutocadPlant3d #teemodeling #teefitting #plantpipeadd 1. ELBOW 2. PIPE - Tap key - Dimension input 3. Tool Palettes - N or Ctrl (Select next attachment port) 4. Plantpipeadd-pipeFitting - B (Basepoint) , N (Next attachment port) , F (Fitting to fitting) , CO (baseCOmponent) 6 Exist Pipe Tie-in - Stub-in : OFF , Connecting in ISO view : COP * 1,2,6 Must be defined in the branch table.
[AP3D] Find Line no. in multiple 3D dwg files (AutoCAD PLANT 3D)
Просмотров 1,6 тыс.Год назад
#AutocadPlant3d #Findlineno #PLANPIDLINELIST [AP3D] Find Line no. in multiple 3D dwg files Using the P&ID LINE LIST (PLANPIDLINELIST) command 1. Create a P&ID file (the file name can be anything). 2. Add Find Line no. (SLINE) And File Save 3. Open the 3D file and run the command P&ID LINE LIST (PLANPIDLINELIST). ( Check!! Zoom to selected item) 4. Likewise, tag no. can also be found. :) * Singl...
[AP3D] Isometric dwg Dimension Units Setting (MM - M)
Просмотров 1,1 тыс.Год назад
[AP3D] Isometric dwg Dimension Units Setting (MM - M)
[AP3D] Copying another project "Equip." using a "Template"
Просмотров 453Год назад
[AP3D] Copying another project "Equip." using a "Template"
[AP3D] SMALL SIZE BRANCH (VENT,DRAIN,PG,TG,OLET ETC) DIMENSION OFF , WELDING NUMBER ON
Просмотров 1,3 тыс.Год назад
[AP3D] SMALL SIZE BRANCH (VENT,DRAIN,PG,TG,OLET ETC) DIMENSION OFF , WELDING NUMBER ON
[AP3D] Flange+Gasket+Flange Boltset Bolt Length (Mapping)
Просмотров 5 тыс.Год назад
[AP3D] Flange Gasket Flange Boltset Bolt Length (Mapping)
[AP3D] ATTACH TRUNNION SUPPORT TO ELBOW CENTER NODE 엘보 기준점에 서포트 설치 :)
Просмотров 799Год назад
[AP3D] ATTACH TRUNNION SUPPORT TO ELBOW CENTER NODE 엘보 기준점에 서포트 설치 :)
[AP3D] Flange (Edge) Dimension In isometric drawing
Просмотров 1,5 тыс.2 года назад
[AP3D] Flange (Edge) Dimension In isometric drawing
[AP3D] Change COP to BOP Elevation in Isometric Drawing & FlangeGroup Annotation Scheme (SRectangle)
Просмотров 4,1 тыс.2 года назад
[AP3D] Change COP to BOP Elevation in Isometric Drawing & FlangeGroup Annotation Scheme (SRectangle)
[AP3D] Using AutoCAD commands scale & stretch
Просмотров 8562 года назад
[AP3D] Using AutoCAD commands scale & stretch
[AP3D] Shop dwg - Welding Point Revision (Type , No. , Spool No.)
Просмотров 6 тыс.2 года назад
[AP3D] Shop dwg - Welding Point Revision (Type , No. , Spool No.)
[AP3D] PIPE RACK PIPING-13 (Autocad Plant 3D Tutorial - Iso dwg Create & BOM Summary)
Просмотров 1,4 тыс.2 года назад
[AP3D] PIPE RACK PIPING-13 (Autocad Plant 3D Tutorial - Iso dwg Create & BOM Summary)
[AP3D] Navisworks 좌표 추출 2D 도면 표기 (Extracting coordinates from Navisworks and marking them on a 2D)
Просмотров 1,7 тыс.2 года назад
[AP3D] Navisworks 좌표 추출 2D 도면 표기 (Extracting coordinates from Navisworks and marking them on a 2D)
[AP3D] PIPE RACK PIPING-12 (Autocad Plant 3D Tutorial - Navisowrks Clash Detective)
Просмотров 1,2 тыс.2 года назад
[AP3D] PIPE RACK PIPING-12 (Autocad Plant 3D Tutorial - Navisowrks Clash Detective)
[AP3D] PIPE RACK PIPING-11 (Autocad Plant 3D Tutorial - Support-3)
Просмотров 1,2 тыс.2 года назад
[AP3D] PIPE RACK PIPING-11 (Autocad Plant 3D Tutorial - Support-3)
[AP3D] PIPE RACK PIPING-10 (Autocad Plant 3D Tutorial - Support-2)
Просмотров 1,3 тыс.2 года назад
[AP3D] PIPE RACK PIPING-10 (Autocad Plant 3D Tutorial - Support-2)
[AP3D] PIPE RACK PIPING-9 (Autocad Plant 3D Tutorial - Support)
Просмотров 1,1 тыс.2 года назад
[AP3D] PIPE RACK PIPING-9 (Autocad Plant 3D Tutorial - Support)

Комментарии

  • @emrahgursacti6840
    @emrahgursacti6840 13 дней назад

    How did you add bolt and gasket?

    • @ap3d-kh
      @ap3d-kh 13 дней назад

      The gasket and bolts are the same as for a typical flange joint.

    • @emrahgursacti6840
      @emrahgursacti6840 13 дней назад

      @@ap3d-kh Thank you, I will try it and let you know my feedback.

    • @emrahgursacti6840
      @emrahgursacti6840 13 дней назад

      @@ap3d-kh I have one more question I want to ask. Can you share your spec with us?

    • @ap3d-kh
      @ap3d-kh 13 дней назад

      drive.google.com/file/d/1xgb59ID9a63d8gmZ2-2IGrgvOkGM4_7E/view This is a cata&spec I made a long time ago.

    • @emrahgursacti6840
      @emrahgursacti6840 12 дней назад

      @@ap3d-kh thank you i will try today

  • @moralllllllllllll
    @moralllllllllllll 14 дней назад

    Could you please make a video that show how to create Reducing tee by catalog builder? Thank you very much!!!

    • @ap3d-kh
      @ap3d-kh 14 дней назад

      ruclips.net/video/iBXLOWDOFxc/видео.html This link shows how to create a cata using the catalog builder. However, for the reducing tee, you need to enter 3 sizes: S1, S2, and S3, and write a reducing table in the spec to get the desired result. Thank you 😊

    • @moralllllllllllll
      @moralllllllllllll 14 дней назад

      @@ap3d-kh Thank for your reply, I see that video several times, but the result not good, could you please show it on video?

  • @mycallmomo
    @mycallmomo Месяц назад

    감사합니다. 저기... 단조 엘보우 치수를 무엇을 보고 하시는건가요?? (L1, l1, L2, l2....)

  • @mycallmomo
    @mycallmomo Месяц назад

    감사합니다. 저기... 단조 엘보우 치수를 무엇을 보고 하시는건가요?? (L1, l1, L2, l2....)

    • @ap3d-kh
      @ap3d-kh Месяц назад

      댓글 달아주신 동영상은 오토데스크 어플스토어에서 다운받은 JIS 카타로그 그대로 사용해서 디스크립션만 변경한것으로, 외형치수는 검토 되지않은 스팩입니다.

  • @iqrobrioktaviyan4645
    @iqrobrioktaviyan4645 2 месяца назад

    Can you share the drawing with me?

    • @ap3d-kh
      @ap3d-kh 2 месяца назад

      This is not a drawing I made, but a drawing downloaded from the pump manufacturer's website.

    • @iqrobrioktaviyan4645
      @iqrobrioktaviyan4645 2 месяца назад

      Thank you in advance, bro

  • @woozzang1077
    @woozzang1077 2 месяца назад

    너무 좋은 자료 감사합니다. 매키니즘을 이해했는데 1:38 에 기입하시는 길이를 넣는 이유가 뭘까요??그냥 볼트카타에서 길이만 바꿔도 되는거 아닌가요?가르쳐 주시면 감사하겠습니다

    • @ap3d-kh
      @ap3d-kh 2 месяца назад

      Mapping작업이 구매하기위한 최소단위로 만들어주는것 입니다. 볼트 길이를 계산해서(볼트 카타에 나온 길이기준으로 계산) 나온값들은 1m 까지 계산되어 나오기에 Mapping값에 길이를 원하는 길이를 5mm 또는 10mm 단위로 넣어 놓으면 스터드나 머신볼트의경우는 계산되어 나온 길이를 Mapping길이 에서 찾아 없으면 조금더 긴것으로 Tap볼트는 좀더 짧은것으로 적용하여 물량에 뽑히는 볼트길이는 Mapping에 있는것 만 정리되어 나옵니다.

  • @Golin2shot
    @Golin2shot 2 месяца назад

    천안에 있는 DUCT 마스터 KIM 입니다 ㅎㅎ 구독 박고 갑니다요~ ㅎㅎ 충성!!

    • @ap3d-kh
      @ap3d-kh 2 месяца назад

      반갑습니다. :)

  • @gilbertovasquez7885
    @gilbertovasquez7885 3 месяца назад

    Say what? No sound? R U Cereal Captain Crunch?

    • @ap3d-kh
      @ap3d-kh 3 месяца назад

      Yes, there is no sound. Even without explanation, just look at it and follow along one by one.

  • @masrek9119
    @masrek9119 3 месяца назад

    always waiting for your next video ❤. thank u so much

    • @ap3d-kh
      @ap3d-kh 3 месяца назад

      WOW Thank you 😊 🙏

  • @kadinoalgeria673
    @kadinoalgeria673 3 месяца назад

    Good

    • @ap3d-kh
      @ap3d-kh 3 месяца назад

      Thank you 😊

  • @THEBIMCENTER-tk4dd
    @THEBIMCENTER-tk4dd 4 месяца назад

    please why did you put the blocks on layer 0 in the bloc editor , why not keep it in equipement layer ? thanks in advance for your responce !

    • @ap3d-kh
      @ap3d-kh 4 месяца назад

      You must select layer 0 and color by layer to select multiple blocks and change the layer (Equipment) at once and the color of the changed layer will be applied. If you select a different layer, you must select and change each block with the block editor.

  • @TrungNguyen-cq3mw
    @TrungNguyen-cq3mw 5 месяцев назад

    Can you give me the file PI- PING PLAN please?

    • @ap3d-kh
      @ap3d-kh 5 месяцев назад

      You don't have to draw it exactly like the video. It is best to just watch the video as a reference and try modeling with the drawing file you have.

  • @Vancou1988
    @Vancou1988 5 месяцев назад

    can you please help me , i have a problem , the size of the valve annotation is bigger than annotation of the lines

    • @ap3d-kh
      @ap3d-kh 5 месяцев назад

      Try deleting the valve and drawing it again. Sometimes the line and valve are not connected, so the size is displayed differently.

    • @Vancou1988
      @Vancou1988 5 месяцев назад

      unfortunately , it doesnt work , also the fonts arent the same ; thats very weird , if you can help me i ll be grateful sire

    • @ap3d-kh
      @ap3d-kh 5 месяцев назад

      Please reboot and try again, but if the error persists, unfortunately, I have no solution.

    • @Vancou1988
      @Vancou1988 5 месяцев назад

      @@ap3d-kh i find the solution , the style of the '' tag '' was not the same , example of the tag #(NominalDimension)-#(InsulationPurposeThickness)

  • @일자-d3m
    @일자-d3m 6 месяцев назад

    안녕하세요~~ 알려주신 방법대로 프로젝트 적용해서 잘 사용했는데 Compound Joint PL 적용 시 모델링 할때 랙이 엄청 걸리네요 ㅠㅠ 뚝뚝 끊깁니다 ㅠㅠ PL 삭제하고 진행하면 coupling이 안나오면서 랙은 안걸리구요ㅠㅠ 적당하면 그냥 진행할텐데 끊기는 정도가 심해서요

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      글쎄요 원인이 뭘까요? 지금껏 잘써오고 있는데.. 혹시 복잡하거나 osnap이 켜져있거나 xref로불러들여 작업중이신지요? 끊기는 원인이 여러가지라 뭐라 말씀드리기가 어렵습니다.

    • @일자-d3m
      @일자-d3m 6 месяцев назад

      @@ap3d-kh 이게 SQL 서버말고 백업받은파일 오픈해서 사용하면 또 안그러는데... 이유가 뭔지 모르겠어요 ㅠㅠ

  • @bluewidochoi
    @bluewidochoi 6 месяцев назад

    감사합니다.

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      처음 시작하셨나요? 금방 습득하셔서 하시는 일에 도움되길 응원합니다. 화이팅 입니다.

  • @bluewidochoi
    @bluewidochoi 6 месяцев назад

    감사합니다.

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      고맙습니다. 조금이나마 도움되기를 ^^/

  • @bluewidochoi
    @bluewidochoi 6 месяцев назад

    진심으로 감사합니다.

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      처음 배우던 시절 작성한 오래전 영상이라 부족한 부분이 있습니다.

  • @qune2002
    @qune2002 6 месяцев назад

    플랜을 만들고 스크립트하면 지정좌표에 글자가 써지는 것인가요? 층별로 잘려있던데 좌표에 어떻게 써지는지 이해가 안가네요.. 2d도면으로 보여서요..ㅠ

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      모델 좌표 기준으로 2D도 면에 작성 하는것 입니다. 층별로 나눠 표기하고 싶으시면 모델에서 층별로 데이터를 뽑아내거나 엑셀에서 z값을 구분하여 작업하시면 됩니다

    • @qune2002
      @qune2002 6 месяцев назад

      @@ap3d-kh 2d 플랜만들어서 주시는 부분도 해주시면 좋겠습니당.

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      네 orthodwg 기능도 한번 만들어 보겠습니다. 인터넷에서 찾아보시면 쉽게 따라하실만한 자료가 많이 있습니다.

  • @박준수-w4c
    @박준수-w4c 6 месяцев назад

    안녕하세요. 7:22 즈음에 나오는 스트레이너 도면은 어디서 구할 수 있는 건가요?

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      스파이럴사코 홈페이지 들어가시면 파일 다운로드 받을수 있습니다.

  • @박찬현-f7j
    @박찬현-f7j 6 месяцев назад

    안녕하세요. 올려주신 자료로 열공중인 구독자 입니다. 영상자료가 너무 좋습니다. 도움을 요청드리는데요. 3D 모델링을 SPEC 등록 했는데, 개체를 삽입하면 다른 모델이 나옵니다. 저는 FLEXIBLE HOSE 를 넣었는데, 기존 등록되어 있던 밸브가 나오는 경우입니다. 혹시 이유를 알수 있을까요? 등록된 카다로그에도 디자인이 정상적으로 나오는데도 말이죠.

    • @ap3d-kh
      @ap3d-kh 6 месяцев назад

      모델링 Dwg 파일에서 Purge 한번 해보셔요 혹시 3Ð블럭 이름이 다른 cata에도 사용되었다면 이전 블럭을 기억하고 있을것 같습니다.

  • @vinothshankar2898
    @vinothshankar2898 7 месяцев назад

    Nice video. Thank you for this. I follow your steps and created in catalog but it will not reflect in model. Error: can’t find symbol for this part. Could you please help me to sort out this issue?

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      To convert 3D dwg to cata, you must create a folder with the same name as the cata file in the folder where the cata file is located and then create cata.

    • @vinothshankar2898
      @vinothshankar2898 7 месяцев назад

      @@ap3d-kh thank you for your quick reply. But I didn’t get you properly, could you please explain step by step

    • @vinothshankar2898
      @vinothshankar2898 7 месяцев назад

      @@ap3d-kh waiting for your reply?

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      @@vinothshankar2898 ruclips.net/video/96ZMuoR88B8/видео.htmlsi=BjSFMOPr8yuVVS6v

    • @vinothshankar2898
      @vinothshankar2898 7 месяцев назад

      @@ap3d-kh thank you

  • @ABlueElephant
    @ABlueElephant 7 месяцев назад

    Thank you !!! You are the best !!

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      You're welcome 😊

  • @MiguelSosa-hy1qh
    @MiguelSosa-hy1qh 7 месяцев назад

    God Job . . . Thanks Sir . . . !!!

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      You're welcome 😀

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      You're welcome 😊

  • @이승민-g2p8w
    @이승민-g2p8w 7 месяцев назад

    안녕하세요 너무나 감사합니다 ~벨브는 적용을 했는데 상대 FLANGE 가, 규격 플렌지가 아닌 "PH MATRIC FLANGE ND " 로 생성 되는데 해결 방법이 있을까요 ?

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      Facing,rating 등 valve와 동일한 flange gasket bolt nut를 같은 spec에 작성 하시면 됩니다. 참고로 rating 작성시 text가 다르지 않도록 주의 하셔야 합니다. 10 10k 10K 전부다르게 인식됩니다.

    • @이승민-g2p8w
      @이승민-g2p8w 7 месяцев назад

      @@ap3d-kh 감사합니다. Flange facing 이 RF인줄 알았더니 B1 으로 되어 있었네요. VALVE 를 Flange 랑 똑같이 맞추니 규격 flange 가 자동으로 나오네요.

  • @ch9916a
    @ch9916a 7 месяцев назад

    thank you very much sire

    • @ap3d-kh
      @ap3d-kh 7 месяцев назад

      You're welcome 😊

  • @ch9916a
    @ch9916a 8 месяцев назад

    Thanks a lot for sharing the infos , can you please tell what is the text font for the piping anotaion , mine is not propriate , thanks oin advance

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      ruclips.net/video/8eD29g5_51c/видео.htmlsi=yqX8z-tCsi_FJD-5 The link video (13 :30) font is Romans. Big font does not need to be set.

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      ruclips.net/video/8eD29g5_51c/видео.htmlsi=yqX8z-tCsi_FJD-5 The link video (13: 30) font is Romans. Big font does not need to be set.

  • @kanegnzg
    @kanegnzg 8 месяцев назад

    Hi! Awsome! Can you also create a tutorial on how to properly rename a used catalog in AutoCAD Plant 3D. Where a catalog is created with a specific name and is already used some specs (existing specs should find the catalog again and stay connected). Appreciate and thank you in advance :)

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      To create a new catalog, you can use the Catalog Builder. Reference video (ruclips.net/video/iBXLOWDOFxc/видео.htmlsi=4fRNH0ChYSdt7_2u) To create using an existing catalog, go to SPEC EDITOR After copying with Popup Menu 'File-Create Catalog from Existing...', you can delete the contents or copy them from the existing catalog. Reference video (ruclips.net/video/u5hICLbRDAA/видео.htmlsi=TZSwgosbGMkq0ch5)

  • @samumano1
    @samumano1 8 месяцев назад

    TOP

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      Your welcome 🤗

  • @bowrain5431
    @bowrain5431 8 месяцев назад

    도움은 되는데 해상도가 떨어져 잘 안보입니다.

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      설정에서 1080으로 해상도 높여서 보실수 있습니다 😀

  • @eunh25
    @eunh25 8 месяцев назад

    잘 봤습니다.

    • @ap3d-kh
      @ap3d-kh 8 месяцев назад

      도움 되었으면 좋겠습니다. 작업하다보면 cop로 bop 로 실수할때가 있습니다. 섹션으로 확인해도 좋고 pipe level을 확인해보는것도 좋고 암튼 틈틈이 확인이 필요합니다

  • @elmelgarejor3041
    @elmelgarejor3041 9 месяцев назад

    thanks!

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      You're welcome 😊

  • @elmelgarejor3041
    @elmelgarejor3041 9 месяцев назад

    excellent!

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      Thanks 😊

  • @gersonpopst4927
    @gersonpopst4927 9 месяцев назад

    Good morning. I am from Brazil. Could you help me configure the bill of materials in isometric? In the list of materials I need a column to contain the unit weight of each component.

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      Good morning :) I've never modified it as you requested. Please check the Autodesk link forums.autodesk.com/t5/autocad-plant-3d-forum/isometric-pipe-weight/td-p/3607902 Thank you 😊

    • @gersonpopst4927
      @gersonpopst4927 9 месяцев назад

      @@ap3d-kh - Thank you for responding and thank you for the videos, as they help us pant3D users a lot.

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      You're welcome 😊

  • @TrungNguyen-cq3mw
    @TrungNguyen-cq3mw 9 месяцев назад

    Where can I contact you? I have a problem to solve with you. Thank you

  • @stephanehotte7860
    @stephanehotte7860 9 месяцев назад

    A small bore piperun won't have dimensions

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      Yes, that's right. This is a method of not displaying the dimensions when the ISO setting is incorrect and the dimensions are written in the small bore. thank you

  • @Sagamore
    @Sagamore 9 месяцев назад

    what's the program do you use?

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      AutoCad Plant 3D 2024 😀 www.autodesk.com/products/autocad/included-toolsets/autocad-plant-3d

  • @Sagamore
    @Sagamore 9 месяцев назад

    where did you download catalogs?

    • @ap3d-kh
      @ap3d-kh 9 месяцев назад

      apps.autodesk.com/en :)

  • @diepdoan1991
    @diepdoan1991 9 месяцев назад

    I need your spec for you, you can send to me. thanks bro

  • @kadinoalgeria673
    @kadinoalgeria673 10 месяцев назад

    Ques.please,How can i change the length of bolt set in the BOM from imperial to metric? for ex. M20x100

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      ruclips.net/video/ITZraA1a0YI/видео.htmlfeature=shared Please refer to the previous video clip

    • @kadinoalgeria673
      @kadinoalgeria673 10 месяцев назад

      @@ap3d-kh thank u very match👍

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      You're welcome 😊

  • @kadinoalgeria673
    @kadinoalgeria673 10 месяцев назад

    Good

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      Thanks 😊

  • @하이드-x7n
    @하이드-x7n 10 месяцев назад

    좋은영상 감사합니다. 그런데 명령어나 음성설명이 없어 따라가는데 속도가 차이나네요 ㅠㅠ

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      목소리도 부끄럽고 무슨말을 할지도 모르고 명령어 자막 넣기는 엄두도 못내고 처음에 제가 기억하려고 이런저런 요령을 영상으로 담아둔건게 많은분들이 보셔서 당황스럽긴 합니다. 명령창을 유심히보시고 스페이스바 눌러 멈춰가며 보시면 좀더 따라해보시기 편하산꺼에요 화이팅 입니다. ^^/

  • @TrungNguyen-cq3mw
    @TrungNguyen-cq3mw 10 месяцев назад

    Why don't I see any code when entering the IsoConfig software?

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      www.firstobject.com/dn_editor.htm 😀

    • @TrungNguyen-cq3mw
      @TrungNguyen-cq3mw 10 месяцев назад

      I mean, I downloaded and used the software, but when I opened the Isoconfig.xml file, the lines of code did not appear?@@ap3d-kh

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      Unfortunately, even if you look up the line with FIND command, I don't know if I can't see it.

    • @TrungNguyen-cq3mw
      @TrungNguyen-cq3mw 10 месяцев назад

      @@ap3d-kh I opened the isoconfig.xml file and it appeared blank. Now how to handle it? Thank you.

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      @@TrungNguyen-cq3mw Even if you open the “Project folder\Isometric\Final_A2\IsoConfig.xml” file installed by default, Does it appear empty? Or is it showing up well but not showing up? Sorry, but is there a problem with the file you are trying to edit or with AP3D? I do not know.

  • @AlexDestov
    @AlexDestov 10 месяцев назад

    Позвольте я оставлю тайм-код на редактирование рамки для FlangeGroup 3:45

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      Да, рад. Отлично. Спасибо за комментарии. :)

  • @dedthepker
    @dedthepker 10 месяцев назад

    Quick question sir, Do you know how to NOT show Length on the bolt?

    • @ap3d-kh
      @ap3d-kh 10 месяцев назад

      I think it will look ND if I don't see the bolt length, but I haven't tried it. I'll test it later.

    • @dedthepker
      @dedthepker 10 месяцев назад

      @@ap3d-kh Thank you! I’ve been in the XML without finding a solution.

  • @PRATHI21Jaga
    @PRATHI21Jaga 11 месяцев назад

    Awesome 🎉

    • @ap3d-kh
      @ap3d-kh 11 месяцев назад

      You're welcome 😊

  • @감성공대생
    @감성공대생 11 месяцев назад

    왜 소리가 안나와요?

    • @ap3d-kh
      @ap3d-kh 11 месяцев назад

      네 소리는 없습니다. 천천히 따라하시면 될꺼에요

  • @nguyenkhacphuong9417
    @nguyenkhacphuong9417 Год назад

    Hi, how can I make the connection for WAFER VALVE, (2gasket, 1 bolts)? I try to make Fastners of connection: "FL-WL" is "gasket. and fastener connection: "WF-WF" is "bolt" but it is not working.

    • @ap3d-kh
      @ap3d-kh Год назад

      The defaoult setting for wafer connection (FL-WF) is 2 gasket and 1 boltset

    • @ap3d-kh
      @ap3d-kh Год назад

      I need to study "WF-WF" Connection more

  • @nguyenkhacphuong9417
    @nguyenkhacphuong9417 Год назад

    GREAT, THANK YOU

    • @ap3d-kh
      @ap3d-kh Год назад

      You're welcome 😊

    • @nguyenkhacphuong9417
      @nguyenkhacphuong9417 Год назад

      @@ap3d-kh, I hope you can make more videos about the AutoCAD 3d plant.

    • @ap3d-kh
      @ap3d-kh Год назад

      @nguyenkhacphuong9417 I upload it occasionally when necessary :) I hope the uploaded video will be helpful to you 😊

  • @용꾸라지
    @용꾸라지 Год назад

    안녕하세요 영상 잘보고 있습니다. :) 다름이 아니고 유튜브를 보고 따라서 라인을 그리고 아이소를 출력해봤는데 아이소가 플랜지 부분만 따로 뽑혀서 영상에는 같이 뽑히길래 아이소 플롯도 바꿔보고 세팅도 영상이랑 똑같은지 확인해 보았는데도 그렇게 나와서 혹시 해결 방법을 알고 계시는가 질문 드립니다. 답글 부탁드립니다!

    • @용꾸라지
      @용꾸라지 Год назад

      플랜지 따로 파이프 부분 따로 이렇게 뽑힙니다 ! 연결도 다 확인했습니다.

    • @ap3d-kh
      @ap3d-kh Год назад

      Gasket,boltset도 작성하셨나요? 모델링에 물방울표기가 없나요? gasket,boltset 작성 부분이 동영상만들때 빼먹었던것 같아요 물방울이 보인다면 gasket,bolt다시 한번 보시고 물방울 없다면 파이프와 플랜지 싹다 잡아서 line no를 변경한후 iso작성해보셔요

    • @용꾸라지
      @용꾸라지 Год назад

      물방울도 없구 GASKET, BOLTSET은 전에 쓰셨던 KS CATA에 있던거 스펙 추가 해서 사용 했는데 에러는 안뜨는데 아이소만 짤려서 나오네요 ㅠ ㅠ LINENO도 변경 후 작성해도 똑같이 나오네요 뭐가 문제인지.. 답답하네요 @@ap3d-kh

    • @ap3d-kh
      @ap3d-kh Год назад

      물방울 표시를 끄신건 아니겠죠? 선택할때 파이프 하나만 선택하신후 마우스오른쪽 버튼 눌러서 같은라인넘버로 연결된것 선택하시면 모두 선택되는것 맞으시죠? Iso 스타일에서 씨트 나눔없이 한장에 작성되게끔 설정하신것도 맞고요 Iso스타일을 spool로 하신건 아니시죠? 다른 라인들은 iso 잘되는데 특정 라인만 그런거라면 다른라인 넘버로 해보시고purge나 audit plant audit등 파일 정리하신후 다시해보세요 그래도 않된다면 저도 모르겠습니다. 도움드리고 싶은데 제가 할 수 있는건 여기까지네요 ㅜ.ㅜ

  • @tjdqoabc
    @tjdqoabc Год назад

    페롤 엘보에 나오는 치수는 뺄 순 없을까오ㅛ??

    • @ap3d-kh
      @ap3d-kh Год назад

      Isosetting 에서 dimension 설정 부분에 들어가면 elbow치수 켜고 끄는것 가능합니다.