Kreatif dan inovatif,membuat alat bantu potong jigsaw secara presisi terima kasih mas atas review semoga bs menjadi inspirasi,sukses selalu 🙏🙏🙏👍👍👍👍⭐⭐⭐⭐⭐
Your projects are always practical and precise! It is so important to keep checking for square when making a jig you have to rely on it being a perfect 90 degrees. I watched someone the other day who did not check before screwing it down and turned out to be off by 1/8".
Good job, the end result looks perfect! I followed your instructions, but I cannot get a straight line between two consecutive holes, the blade always drifts to the side, even though the base (seems to) stay straight.. :-/ Any tips?
Tanya mas, material HMR itu rekomen gak sih buat bahan meja lemari atw kitchen set? Sepertinya materialnya lumayan solid. Kebetulan di t4 sy sdh banyak toko yg jual
Hi I make one!! but there is a problem!! the citing line in the guide itself was not straight but has deviation.?? may be the jigsaw problem it self? sir
I have case like that before, i found the problem the blade not strong enough for cut staright, try change with good quality or good brand. That the problem solve and try cut with high speed
Ciao sono Roberto, sono Italiano e sono appassionato da lavori di falegnameria, e vedendoti lavorare anche per fare questi Jig, capisco la tua bravura ed abilità nel farli. Vorrei prendere spunto e misure dalle tue lavorazioni, ma non essendo iscritto ne su Facebook ne su Instagram, come già ti dissi vorrei sapere come posso fare per avere i tuoi progetti FreePlan. Grazie tante e continua così. Bravissimo. Roberto
this is for guide, you can easy see line mark on this hole, why i give many hole sometime if want cut small you can use this hole for help place this jig
Kreatif dan inovatif,membuat alat bantu potong jigsaw secara presisi terima kasih mas atas review semoga bs menjadi inspirasi,sukses selalu 🙏🙏🙏👍👍👍👍⭐⭐⭐⭐⭐
siap makasih banyak
Your projects are always practical and precise! It is so important to keep checking for square when making a jig you have to rely on it being a perfect 90 degrees. I watched someone the other day who did not check before screwing it down and turned out to be off by 1/8".
thank you very much😊👍
Stepwise and complete presentation which is very very easy to understand.Thanks 👍 Sir.
You are most welcome
Congratulations, what a wonderful idea.Greetings from Colombia 🇨🇴 👍🏼
thank you very much!!
Nice setup for a less noisy saw.Would be good for several production jobs like laminate flooring.
I agree!
Vynikající projekt, jako vždy. Zdravím z České republiky a přeji do Nového roku všechno nejlepší a hlavně hodně zdraví.
thank you very much😊👍
This is excellent. I might do this when I get some left overs
thank you 👍👍
Will be my best tool at the shop. Great tip. Thanks
Glad to help
Fantastic work, my friend! Nicely done! 😃
Stay safe there with your family! 🖖😊
Thanks! You too!
wonderful project simply explained, thank you, specially the squareness obtained .
You are welcome!
Neat idea to combine the track guide with a cutting station for the jigsaw! :-)
Glad you liked it!
@@plywoodworking jajjjn
Good job, the end result looks perfect! I followed your instructions, but I cannot get a straight line between two consecutive holes, the blade always drifts to the side, even though the base (seems to) stay straight.. :-/
Any tips?
Thank you very much!👍😊👍
Ottimo progetto eseguito come al solito alla perfezione complimenti
Awesome, thank you!
Izin download terima kasih sudah berbagi 🙏🏻
siap
Congratulation with your excelent job, I am ejoyd seeing it... 👍🏼
Awesome, thank you!
Really nice job, made with precision and skill.
Thank you very much!
sos un varbaro amigo
You're making a good job. I realy like your videos. And after all I use to be ok with automated voice 🙂👍
Awesome, thank you!
Gr job
Thank you
Artist 👍
Thank you
Thanks!
Welcome!
Perfecto 👏👏👏👏👏
Thank you very much
Verry good
Very good
Thank you for sharing this! Amazing Work! :)
Very welcome👍🏻👍🏻
@@plywoodworking May I know what software do you use for the 3D model? It’s look so cool
Muy buena guía. Que cuchilla usas que no se ve desgarrada la madera?
Saludos desde Medellin Colombia
Tanya mas, material HMR itu rekomen gak sih buat bahan meja lemari atw kitchen set? Sepertinya materialnya lumayan solid. Kebetulan di t4 sy sdh banyak toko yg jual
Sangat recomended untuk kitchen set sto lemari kamar mandi
@@plywoodworking Rencana mau bikin meja biro kantor desa. Tq rekomendasinya 👍
So the bottom board slot works as jigsaw blade vertical guide?
yes can work like that, for secure blade
Kayu tebal brp ? Ada link pembelian aluminium track nya ?
Detail ada di videoya, klo aluminium beli di toko aluminium ada
How to download the free plan? I already join the FB group but there's no free plan attached on the posted content.
just re-upload all plans, someone delete the plan, try with hashtag plywoodworking.
What are the circle cutouts for on the track guide?
Forstner bit
Hi I make one!! but there is a problem!! the citing line in the guide itself was not straight but has deviation.?? may be the jigsaw problem it self? sir
I have case like that before, i found the problem the blade not strong enough for cut staright, try change with good quality or good brand. That the problem solve and try cut with high speed
@@plywoodworking
Thanks a lot sir.
Your welcome
L
. Cimitero
Gooood 👍👍👍👍👍
👍🏻👍🏻👍🏻
Ciao sono Roberto, sono Italiano e sono appassionato da lavori di falegnameria, e vedendoti lavorare anche per fare questi Jig, capisco la tua bravura ed abilità nel farli. Vorrei prendere spunto e misure dalle tue lavorazioni, ma non essendo iscritto ne su Facebook ne su Instagram, come già ti dissi vorrei sapere come posso fare per avere i tuoi progetti FreePlan. Grazie tante e continua così. Bravissimo. Roberto
you dont have facebook, iwill give link for free plan for this project
this is for link drive.google.com/drive/folders/1UieAwn3JBZrszXO9t-qLK0xx2dk6PzYu?usp=sharing
mas kalo beli tool AEG dmana ya? seperti susah kalo di online
udh gk ada lgi, ada harga normal jutaan
Wah padahal kepingin, sperti keren gitu kalo brand bagus tp gk pasaran
@plywoodworking What is the purpose of the 7 holes you drill at around 4:22 ?
this is for guide, you can easy see line mark on this hole, why i give many hole sometime if want cut small you can use this hole for help place this jig
@@plywoodworking Yes, that makes sense 👍
Jigsaw Track Guide
thank you very much 😊
✅🍻📈
thank you very much!!
AI generated speech is terrible. Ruins the video. Couldn’t watch
no problem, thank you for visit my channel
I will try to do it with Stodoys plans.
thank you very much 👍👍💕