GT500 Supercharger On Cammed LS1 C5 Corvette | Part 3 | [ 4K ]
HTML-код
- Опубликовано: 9 янв 2024
- Third update on my progress of getting this gt500 blower to fit on to my C5 Corvette. I ran out of grind stones so next I will finish the top plate and tighten everything down. Then I will be able to put the the fuel rails and injectors in place as well as adding the new 340 fuel pump.
Follow the owner on instagram!
@mr.atkinsss
@mr.atkinsssphoto
★ ★ ★ ★ ★ 2001 C5 Corvette Mod List ★ ★ ★ ★ ★
★ Under the hood - Soon to have a supercharger
★ Engine - 1/2 head Bolts(not studs), LS7 lifter, hardened push rods 7.400, Dual Pac 660 springs, BTR Stage 4 cam, 3 bolt cam gear, ls2 timing chain, pinned crank, hand decked block, hand decked heads, hand ported intake and exhaust on heads, and reseated valves
★ Exhaust - Long tube headers, 3in. fully catless with x pipe, and no resonators,
★ Transmission - Stock 6 speed manual
★ Clutch - Unknown
★ Fueling - Stock on 93
★ Exterior - Stock
★ Interior - Stock
★ Wheels & Tires - Stock C6 Corvette Zo6 wheels wrapped in 245/35/18 in the front and 305/35/19 in the rear
★ Suspension - Stock suspension
★ Tune - Michigan Motorsports remote tune
If you have any questions or want to collaborate with me, DM me
@mr.atkinsss
If you'd like to book a photo/video-shoot with me, DM me
@mr.atkinsssphoto
Equipment and Tools I used in this video:
Sony A7III
24-70 F2.8 G-Master
If you made it this far you might as well like and subscribe! - Авто/Мото
All the GT500 supercharger is basically a whipple supercharger.
Pretty much, I got the blower for $500 and trying to keep the build under $2500 for everything and another $500 for a tune. I’ll make a build list video once I finish and get it running.
But 1/10th the price its an eaton twin screw
I just want this thing to whine 😂, got a Procharged car, and 2 turbo cars, after this one is finished I plan on putting an 871 blower on one of my Camaros but that will be a while
@@boosted_allive chat fr lol
Yea it’s jumping tonight 😂