I ordered 3" aluminum for bottom pocket. How many inches of lift will I get out of this ? You said its double at fender . So am I getting 6"? The spacers comes with gas charged shocks as well .
Hi, I need a front and rear lift max. 1 Inch for a 2008 Jeep Cherokee/Liberty KK. Did you can give me an a tip and send a tip and did you ship to Germany? Thank`s Mark
I have a 99 Dodge Ram 1500 van with the V6 2wd, do you have a lift / leveling kit for my vehicle? I heard the were different for 98-02, most shops don’t know or don’t want to help because I don’t want to spend $1000s on a 4x4 conversation kit. What do you have or suggest? I would like to go 3” or higher....... thx
Ok great I'll check it out bc I wasn't sure I have a extended cab and some won't work on a extended cab. another question if I already have a top mount spacer could I add . Your bottom mount spacer to the springs also to give it even more lift ?
I have bilstien 5100 adjustable set at 1.5 inch. if I adjust them higher I'm told I have to do a drop differential & new a arms. big bucks-for me. so, I'm currious if I can add a one inch spacer on top of my current set up? thank u! great video!
I have a 1997 GMC Sierra 1500 2WD Extended cab I would like to replace my 2 upper control arms to gain clearance to put bigger tires to my ride do you have them? or do you have any suggestions for it?
i have a 1996 chevy s10 i still havnt measured the difference from the rear end to the front end but if i need to lift the front end up 4in i would need 2in spacer correct?
Thanks for the video. I have a 2015 Ford Fiesta all stock. Im wanting to lift it a little for some more offroad kind of tires for camping. Does anyone know what kind of spacer I should go with? Thank You for the video and details. Appreciate the knowledge.
Global West Suspension Its all good. Plus it should be a research anyways. I appreciate the reply. I was going to go for a 1 inch lift and that should be a 2 inch lift at the wheel if I remember correctly. Thank You for the video. It really did help put me into the right direction.
would you have something to fix my honda civic? got 18 wheels and it rubs....need around 10-15mm up the suspension springs (new) to get it right. Pls help. honda civic 2001 sedan 4 door d17
Brucie Bruce Hello! Thank you for watching our videos. Unfortunately, you cannot stack horse shoe spacers. Plus, we do not have any spacers for the Mazda.
+Charles Williams Yes, we do have front spacers for the '74 Grandville; they are available in 3/8ths and 1/2 inch. To buy, you can visit our website at www.globalwest.net or call 1-877-470-2975. Thanks for watching!
I have a ford flex and it has a similar 'pocket' for the rears are you are showing here. This video at the 8:15 mark shows a better picture ruclips.net/video/45rKIaPuL5Y/видео.html Yes it's showing for a lincoln MKS but the flex is the exact same. Can I use those steel circle spacers to raise the car height?
Awesome lesson learned...
Thanks for watching
Nice. Thank you. Good straight forward explanation.
Great video. I'm ready to do my front springs. However do the spacers give the 2 to 1 lift on the rear also?
I ordered 3" aluminum for bottom pocket.
How many inches of lift will I get out of this ? You said its double at fender . So am I getting 6"?
The spacers comes with gas charged shocks as well .
Was this correct? Did you actually get 6ins?
For the most accurate response to your question give our tech line a call! 877-470-2975
Great video ty
Hi, I need a front and rear lift max. 1 Inch for a 2008 Jeep Cherokee/Liberty KK. Did you can give me an a tip and send a tip and did you ship to Germany? Thank`s Mark
Unfortunately we do not make anything for Jeeps.
I have a 99 Dodge Ram 1500 van with the V6 2wd, do you have a lift / leveling kit for my vehicle? I heard the were different for 98-02, most shops don’t know or don’t want to help because I don’t want to spend $1000s on a 4x4 conversation kit. What do you have or suggest? I would like to go 3” or higher....... thx
sorry we work on american muscle cars not vans !
Ok great I'll check it out bc I wasn't sure I have a extended cab and some won't work on a extended cab. another question if I already have a top mount spacer could I add . Your bottom mount spacer to the springs also to give it even more lift ?
Jeffrey -- We really don.t advise using spacers on both ends of the spring, at that point you need new springs.
I have bilstien 5100 adjustable set at 1.5 inch. if I adjust them higher I'm told I have to do a drop differential & new a arms. big bucks-for me. so, I'm currious if I can add a one inch spacer on top of my current set up? thank u! great video!
Thanks for the support! glad the video helped! For the most accurate response to your question give our tech line a call! 877-470-2975
Hi do you have some for a 2002 Sierra 1500 stock control arm. Thanks in advance
Sorry, no we do not work on trucks!
Really nice in depth video, good job!
CraftinmineralMc Thanks for watching!
I have a 1997 GMC Sierra 1500 2WD Extended cab I would like to replace my 2 upper control arms to gain clearance to put bigger tires to my ride do you have them? or do you have any suggestions for it?
we dont work on trucks try a quick google search !
great video
Thanks!
What kind of springs do you need for a 3inch lift with the spacer for gm
give my tech sales department a call 877-470-2975!!
i have a 55 chevy 2 dr sedan i want to raise front end as high as i can get it without installing a straight axle, any ideas?
give our tech line a call 877-470-2975 !
i have a 1996 chevy s10 i still havnt measured the difference from the rear end to the front end but if i need to lift the front end up 4in i would need 2in spacer correct?
For the most accurate response to your question give our tech line a call! 877-470-2975
height increase is doubled at the fender; ah ha, thanks for that!
you have these for honda civic 2013-2015 si? thanks
Sorry Will we only have spacers for old American Muscle cars. Thanks for checking.
I used the aluminum horseshoe on my 2010 Chevy Express and my springs bow out now. Is that normal?
Visit a local suspension shop for the most accurate information!
@@GlobalWestSuspension LOL way to pass the buck! Support your product!
could I add a bottom mount spacer if I already have a top mount spacer ? I can't find any info on that .
Contact a suspension professional for advice on your specific situation!
Thanks for the video. I have a 2015 Ford Fiesta all stock. Im wanting to lift it a little for some more offroad kind of tires for camping. Does anyone know what kind of spacer I should go with? Thank You for the video and details. Appreciate the knowledge.
+Jacob W Hey Jacob, thanks for watching our videos! We don't work with newer cars, only classic muscle cars. Sorry about that!
Global West Suspension Its all good. Plus it should be a research anyways. I appreciate the reply. I was going to go for a 1 inch lift and that should be a 2 inch lift at the wheel if I remember correctly. Thank You for the video. It really did help put me into the right direction.
Great! Glad we were able to help.
I got 97 silverado like to lift up front to level the truck which one will I need?
try looking on silverado forums we deal with american muscle cars !
would you have something to fix my honda civic? got 18 wheels and it rubs....need around 10-15mm up the suspension springs (new) to get it right.
Pls help.
honda civic 2001 sedan 4 door d17
Unfortunately no
Hello Sir, do you have spcers for 2014 VW Tiguan R line 4 motion?
Hello George. Thank for watching our video. Unfortunately, we don't have spacers for your particular car. We focus on classic American muscle cars.
Hey boss man, do you have 2" front spacers for a 1980 C10 2WD?
unfortunately we do not
@@GlobalWestSuspension ok boss i found some on eBay
@@Sam_DaMan awesome
We need a kid for a 2020 Chevy traverse can you help us or pointers in a direction
try google!
do you have any that will fit a 2004 chevy Silverado ?
Yes, there are three sizes -- 1/2 --- 3/4 ---- 1 inch.
@@GlobalWestSuspension where i can Buy one for 2006 Chevy Silverado 1500 lt 2wd
can I stack those horse shoe spacers? I have a 99 Mazda B2500 2wd and i can't find any lifts for it. i want at least 4inches
Brucie Bruce Hello! Thank you for watching our videos.
Unfortunately, you cannot stack horse shoe spacers. Plus, we do not have any spacers for the Mazda.
ok, thanks. and no problem
would those horse shoe spacer fit my 1974 Pontiac Grandville
+Charles Williams Yes, we do have front spacers for the '74 Grandville; they are available in 3/8ths and 1/2 inch. To buy, you can visit our website at www.globalwest.net or call 1-877-470-2975. Thanks for watching!
So would the 1inch spacer work for the 1974 Pontiac Grandville
Do you need alignment after you install them?
Whenever working on suspension an alignment would be great peace of mind!
do u have any that will fit 2wd 98 Ranger 4.0?
Jared Herrera Thanks for watching Jared. Unfortunately, we do not sell any parts for 1998 Ranger.
Are you supplying for Audi A6 c6 4f2 2010?
no unfortunately!
Do you have 1 or 2 inch spacers for an '88 Mustang?
www.globalwest.net/ford-gw-coil-spring-spacers.html#top
where I can buy for my explorer 03 spacer. my location ksa. thanks
jake bert Thank you for watching our video. Unfortunately, we do not carry parts for 2003 Explorers.
Would these fit a 2wd 1967 c10
no unfortunately !
Will they work for a 97 crown vic
no unfortunately!
do you guys have a 1 or 1.5 inch lift for the front of a 2006 mustang gt
Yes we do have 1.5 inch lift front spring spacers for 2006 mustang gt.
If u use 2 1.5 inch spacers does that equal 2 3 inches
Why does a one inch spacer give you 2" of lift?
Because of the ratio of the lower control arm based off the spring location on most GM older cars.
Will the polyurethane ride better than the aluminum?
+James Tanner Thanks for watching! The spacers shouldn't effect the ride at all, regardless of the material.
Top or bottom
I have a ford flex and it has a similar 'pocket' for the rears are you are showing here. This video at the 8:15 mark shows a better picture
ruclips.net/video/45rKIaPuL5Y/видео.html
Yes it's showing for a lincoln MKS but the flex is the exact same. Can I use those steel circle spacers to raise the car height?
These spacers are not designed for the ford felx! good luck in your search!
I have a 1985 c10 you have 2 inches
we don't work on C10's !!
Christ, why don't you make spacers for a Chevy C10!
We specialize in Muscle cars!
@@GlobalWestSuspension
I’m sorry I didn’t know my 66 C10 with a 454 didn’t qualify as a muscle car 🙄
@@GlobalWestSuspension
You know they are just springs right? Inside diameter, outside diameter, not much to it
Blah- blah- blah. How about recommending an ideal spring compressor tool for the job? Not all of us have the entire car torn apart...
would these fit a 1994 ford ranger 2WD?
+Tyler Reiff Thanks for watching our video! Unfortunately, our spacers do not fit that particular car.
Super late but wulf suspensions has some coil spacers for your ranger. I just installed them on mine.