Measure the Drum Gap on a Probat P12 Roaster
HTML-код
- Опубликовано: 13 окт 2024
- Measure the Drum Gap on a Probat P12 Roaster. Charlie is back to show you Measure the Drum Gap on a Probat P12 Roaster. Watch as Charlie explains which tools you will need along with the tolerance range in order to measure the drum gap on a Probat P12 Roaster.
If you enjoyed the video, please SUBSCRIBE, like, and leave your requests for future videos in the comments below!
Follow us on Social -
/ probatusa
/ probatusa
/ probatusa
/ probatusa
Alhamdulillah, sekarang di Indonesia sudah banyak produsen mesin roasting berkualitas sehingga kami tidak memerlukan PROBAT
Saludos desde Venezuela me gustaría saber el costo actualmente de un tostador probat en dólares ?
Do you recommend a 1.5mm drum gap (when cold) for all of the P-series roasters? Are there different tolerances for different sizes or model years? Thanks!
The 1.5mm gapping measurement should be taken with either a cold drum or ambient air. 1.5mm should work for all P5, P12, 25.
Hello, how to adjust the drum axis? My drum, a little bit slanted, one side rubs against the roaster inside the surface, one side leaks beans. Thanks.
What are you roasting on?
When you have used your spanner wrench and you have a adjusted the drum as far back as you can and it continues to rub periodically then what do you do?
If you run into this issue then you need to take the bearing out and turn the adjustments nut out more and then reinstall the bearing.
Good info, except: reversing east west.