I did something similar to my 4060 LP. 900mv +255 +500mhz on memory Temps dropped around 15c in a 30c degree room One tip for AM5 users on a budget A620 board. Since these processors tend to run to TJMax and AMD states it is normal, if you are not comfortable with the temps, you can go into bios and change the TJMax to the degree of your choice. Here are my results: TJ MAX 80C - maintains 76C CPU-Z stress test score 5500 TJ MAX 70C - maintains 70C CPU-Z stress test score 5450 TJ MAX 60C - maintains 60C CPU-Z stress test score 5250 The TJ MAX value to score ratio will depend on the cooling potential of the cooler. It is worth trying out on your 5600, hopefully you get even better results!
Undervolt is great, summer incoming so i dropped the voltage down 0.15mV on my RTX2080, around 50w less powerdraw, -600rpm on the fans and still 10-15c drop in both gpu and hotspot temp. The preformance drop is there but you can only see it in a benchmark.
Noctua just released their home series fans, including one for devices. Should be able to put two on top of this case wonder if it would help the temps?
What should i look for to undervolt best? Is it quality power stages on mobo? I prefer losing no or minimal gaming performance, and just wanna keep things as cool as can be for mini itx with high end parts
Run a gpu benchmark, note down the stable frequency, then decrease voltage in increments whilst running a benchmark. If it crashes, then go back to either the previous voltage when it was last stable or the one before that.
I'm planning to build a similar pc, but since your video doesn’t show any gameplay footage with the fan noise. I’m considering replacing the CPU cooler with either the Be Quiet Pure Rock LP or the Noctua NH-L9a-AM5 let me know which one of these Cpu cooler is the quietest. My goal is to minimize noise or make the PC as silent as possible
@@JammyMunkyTech yessir that’s the plan although I got a question 🙋♂️ if I use a fan splitter to use normal pc case fans instead of USB, will I be able to use them as normal and will need a controller or will they be controlled from bios/ working automatically accordingly to the needs ex temp inside etc? I know it’s dumb question 😂
Just do an undervolt because that's gonna look tacky. I was looking at a case on AliExpress that's 5.1L that you can put two fans at the top and being an half inch wider in WxDxH it can take a taller cooler but the shipping makes it expensive. From the specs you can use a gpu like this and the 4060 lp might be a tight fit. It's the SIXGE K2S V2.0
I'm putting together a build similar to yours for my mother, mainly for work, streaming, and browsing. I'm planning to use a CPU with integrated graphics to keep the temperatures manageable and since she doesn't game, an extra GPU isn't necessary. Initially, I considered the Deepcool CH160 case, but I'm wondering if I can go even smaller. What are your thoughts on this plan?
I did this same build with your video, except the power supply is a fsp flexguru pro 500w and my gpu is a pny rtx 3060 xrl8. Different ram,mb and ssd, but it is not so important. In my case, what parameters could I use for my 3060? Thanks
Run a benchmark on your card for 5mins. Find out what the core clock and voltage stabilises at. Note down the figures and use them as a starting point in afterburner. i.e. My GPU was stable at 2535mhz at around 1000mV Whilst running a benchmark, in increments decrease voltage until it crashes, then go back to the voltages previously before the crash and run that for a few minutes. If stabilised then great. e.g. My GPU at 2535mhz was stable at 900mV Or you can try this: ruclips.net/video/gH8y67-7NBE/видео.htmlsi=ZQXHy8tNpNe8IP2V However is it best to run your own benchmark as every 3060 card may vary in performance.
The Velka 3 case is a 3.99 liter case and this one is 4.3 liters. The biggest difference may be the case material but the Velka will hit you for about $160 with no riser cable and this one comes with a gen 3 riser cable so you'll still need to get a gen 4 but the case and riser will cost the same as the Velka by itself.
i built this exact setup but used a r7 5700g since i didnt wanna use a gpu. im runinng 60-70c and it feels really warm out of my case( warm plastic smell. can i undervolt an apu? i tried to use ryzen master but it says my cpu isnt supported. please help thanks
I've never tried an app from amd, so have no idea if you can undervolt. The plastic smell though, are you sure there isn't any plastic wrapping inside the pc case?
This works in all 4060 right? i have almost the same build as you. 4060 and R5 5600. Edit: Just found out that my motherboard doesn't support overclocking. so i cant undervolt my R5 5600.
Geez dude, you're complaining about it running hot 🔥 your PC, and there you go leaving a POT of flower on top, to block the slightest natural exhaust 🤦♂️🤦♂️🤦♂️
@@JammyMunkyTech i've got the same case with a R5 7600 & a zotac 4060 solo, unfortunately i can't post an image for you to see, i modified it, 2× 40mm fans on top as exhaust, i cutted off 2 holes on both side for the Cpu cooler fan & gpu fan for good airflow, and it's way better, i undervolted the Cpu in the BIOS & GPU with MSI afterburner
@@JammyMunkyTech it was for sure running hot , cpu was above 86⁰c with Heaven benchmark, Gpu was around 70⁰c above something like that, but after modification CPU is 60 to 70⁰C with Heaven & GPU 66⁰C, GPU voltage 0.950V, it was better than before, so i left it like that,
@@JammyMunkyTech I know. Just kidding. What should MS-01 and Raspberry PI be called then? micro? legion GO mini PC... ;) The mini PC should take up half of it and fit into the server rack. Otherwise, it's just useless show-offs for posers... Just a PC that girls can pick up...
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![Blox Fruits Dragon Rework Update [Full Stream]](http://i.ytimg.com/vi/EqDAp8udhm0/mqdefault.jpg)
I did something similar to my 4060 LP.
900mv +255
+500mhz on memory
Temps dropped around 15c in a 30c degree room
One tip for AM5 users on a budget A620 board. Since these processors tend to run to TJMax and AMD states it is normal, if you are not comfortable with the temps, you can go into bios and change the TJMax to the degree of your choice. Here are my results:
TJ MAX 80C - maintains 76C CPU-Z stress test score 5500
TJ MAX 70C - maintains 70C CPU-Z stress test score 5450
TJ MAX 60C - maintains 60C CPU-Z stress test score 5250
The TJ MAX value to score ratio will depend on the cooling potential of the cooler.
It is worth trying out on your 5600, hopefully you get even better results!
Undervolt is great, summer incoming so i dropped the voltage down 0.15mV on my RTX2080, around 50w less powerdraw, -600rpm on the fans and still 10-15c drop in both gpu and hotspot temp. The preformance drop is there but you can only see it in a benchmark.
Perfect for summer 😎
Def better temps is the way to go nice video bro!
👊
Fantastic info on undervolt the cpu & gpu. Thanks. I was wondering if you will do another undervolt lesson on Intel cpu. Cheers!
Can I fit another lower gpu in this?? 🙃
Yes
do the undervolting applications have to be opened or running in the background the whole time for them to take effect?
Yes, but you configure it in the bios so you don’t have to use the apps
@@JammyMunkyTech does that apply for both cpu and gpu undervolts?
Noctua just released their home series fans, including one for devices. Should be able to put two on top of this case wonder if it would help the temps?
Yeah I was just looking at that, I might have to try it out
What fans are those? I have the same case. I wanted to add fans in this case too.
@@JammyMunkyTech if you try it, could you please post an update video, I'm curious about how loud the pc will be while Idle or playing video game
What should i look for to undervolt best? Is it quality power stages on mobo? I prefer losing no or minimal gaming performance, and just wanna keep things as cool as can be for mini itx with high end parts
Run a gpu benchmark, note down the stable frequency, then decrease voltage in increments whilst running a benchmark.
If it crashes, then go back to either the previous voltage when it was last stable or the one before that.
I'm planning to build a similar pc, but since your video doesn’t show any gameplay footage with the fan noise. I’m considering replacing the CPU cooler with either the Be Quiet Pure Rock LP or the Noctua NH-L9a-AM5 let me know which one of these Cpu cooler is the quietest. My goal is to minimize noise or make the PC as silent as possible
I have a K39 build, i'm gonna do this after install a GPU, nice tutorial ❤
👊
Is there space for 1 or 2 Noctua 40mm fans inside? Above the gpu and/or the other side?
I'll give it a try at some point
why not mod the case for better air flow?
It’s fine with undervolting
beautiful PC, nice undervolting and such an awesome video
Thank you 🙌
I did the same when undervolting my GPU, best temps with a small performance hit.
What card did you undervolt? Before and after temps?
@@JammyMunkyTech Inno3d 4070 Ti, 80C stock and 67C with the undervolt.
@@richardfarmer6570 👌
Can't you use external coolers that are used on gaming phones?
Could be a good idea 👍
Is undervolting something that's needs to be done everytime you turn on your unit or is it saved and you just have to do it once?
It’s saved, it’ll load every time the pc is turned on if you set msi afterburner to open on startup
@@JammyMunkyTech as for the cpu also right?
I have watched this video 3 times already
Suggestion : Would've loved if you had included GPU fan RPM in the OSD
🙌 noted
same here :(
Finally someone with the same setup as me T_T may I ask why didn't you undervolt your cpu in bios?
I use editing software that might need the extra cpu performance so I just found it quicker to turn off the undervolt in ryzen master if I needed to
@@JammyMunkyTech just use pbo. No loss in performance (slight gain in most cases) and lower temps and lower power draw for pretty much all tasks
@@Raven.tech614 I’ll check it out 🤝
How much does it cost you to?
Does this undervolting cpu and gpu applicable to my current motherboard gigabyte a520i? TYIA
Gpu yes, cpu I’m not sure, depends on your motherboard, if there are any limits etc
Can you not slap 1 fan on each side and two at the top?
sure if you want, on the outside I suppose
@@JammyMunkyTech yessir that’s the plan although I got a question 🙋♂️ if I use a fan splitter to use normal pc case fans instead of USB, will I be able to use them as normal and will need a controller or will they be controlled from bios/ working automatically accordingly to the needs ex temp inside etc? I know it’s dumb question 😂
Just do an undervolt because that's gonna look tacky. I was looking at a case on AliExpress that's 5.1L that you can put two fans at the top and being an half inch wider in WxDxH it can take a taller cooler but the shipping makes it expensive. From the specs you can use a gpu like this and the 4060 lp might be a tight fit. It's the SIXGE K2S V2.0
I'm putting together a build similar to yours for my mother, mainly for work, streaming, and browsing. I'm planning to use a CPU with integrated graphics to keep the temperatures manageable and since she doesn't game, an extra GPU isn't necessary.
Initially, I considered the Deepcool CH160 case, but I'm wondering if I can go even smaller. What are your thoughts on this plan?
A small and thin case would be ideal since you don't need a GPU. I would say go for a case like the one in this video or even smaller
@@JammyMunkyTech Thank u. Appreciate your help!
I did this same build with your video, except the power supply is a fsp flexguru pro 500w and my gpu is a pny rtx 3060 xrl8. Different ram,mb and ssd, but it is not so important.
In my case, what parameters could I use for my 3060?
Thanks
Run a benchmark on your card for 5mins.
Find out what the core clock and voltage stabilises at.
Note down the figures and use them as a starting point in afterburner.
i.e. My GPU was stable at 2535mhz at around 1000mV
Whilst running a benchmark, in increments decrease voltage until it crashes, then go back to the voltages previously before the crash and run that for a few minutes.
If stabilised then great.
e.g. My GPU at 2535mhz was stable at 900mV
Or you can try this: ruclips.net/video/gH8y67-7NBE/видео.htmlsi=ZQXHy8tNpNe8IP2V
However is it best to run your own benchmark as every 3060 card may vary in performance.
10.6k strong 💪
how much was this build and is this smaller than Velka 3 rev 3.0?
The Velka 3 case is a 3.99 liter case and this one is 4.3 liters. The biggest difference may be the case material but the Velka will hit you for about $160 with no riser cable and this one comes with a gen 3 riser cable so you'll still need to get a gen 4 but the case and riser will cost the same as the Velka by itself.
@@heirtothethrone000 how did you undervolting?
Can't seem to get Enhance 400W Flex ATX 1U Platinum efficiency power supply PSU in UK Amazon at the mo but 600w is available..still ok in this case ?
@@MrJackster1961 yep that’ll be fine
i built this exact setup but used a r7 5700g since i didnt wanna use a gpu. im runinng 60-70c and it feels really warm out of my case( warm plastic smell. can i undervolt an apu? i tried to use ryzen master but it says my cpu isnt supported. please help thanks
I've never tried an app from amd, so have no idea if you can undervolt.
The plastic smell though, are you sure there isn't any plastic wrapping inside the pc case?
I will love to build this pc i normaly play on ps5 but this looks amaising . Can this pc dongaming and streame at the same time ????
It’s probably possible at low settings, but I would have to test it to find out
@@JammyMunkyTech perfect thanx bro . I will be here for any video test
I got gigabyte A620i gigabyte a620i ax motherboard, I did not know that it has no PBO. How can I undervolt my CPU?
Don’t know, I don’t have your motherboard
Undervolt only if your cpu throttles or is near throttling otherwise you can lose more than twice the amount of performance without the undervolt.
This works in all 4060 right? i have almost the same build as you. 4060 and R5 5600.
Edit: Just found out that my motherboard doesn't support overclocking. so i cant undervolt my R5 5600.
Yeah works with a 4060, you wouldn’t want to overclock it anyway in this case, it would get too hot. Undervolt is better for it
can you link us the skin? i cant find it, the one i google shows different
The skin in MSI Afterburner? Or the software MSI Afterburner itself?
can it run minecraft well
with ease
why i cant highlight it?
I don’t know, are you doing it correctly?
I’m glad I’m not into itx, micro atx ftw
I like both
Geez dude, you're complaining about it running hot 🔥 your PC, and there you go leaving a POT of flower on top, to block the slightest natural exhaust 🤦♂️🤦♂️🤦♂️
They didn’t affect temps at all, and were there for scale and decorative purposes for the video, but good spot dude 😂
@@JammyMunkyTech i've got the same case with a R5 7600 & a zotac 4060 solo, unfortunately i can't post an image for you to see, i modified it, 2× 40mm fans on top as exhaust, i cutted off 2 holes on both side for the Cpu cooler fan & gpu fan for good airflow, and it's way better, i undervolted the Cpu in the BIOS & GPU with MSI afterburner
@@maxdave9590 cool, before and after temps?
@@JammyMunkyTech it was for sure running hot , cpu was above 86⁰c with Heaven benchmark, Gpu was around 70⁰c above something like that, but after modification CPU is 60 to 70⁰C with Heaven & GPU 66⁰C, GPU voltage 0.950V, it was better than before, so i left it like that,
@@maxdave9590 👍
Stop using the term mini. It will be mini when it fits in a backpack and on board an airplane with a battery...
It’s a mini itx pc duhhh
@@JammyMunkyTech I know. Just kidding. What should MS-01 and Raspberry PI be called then? micro? legion GO mini PC... ;)
The mini PC should take up half of it and fit into the server rack. Otherwise, it's just useless show-offs for posers... Just a PC that girls can pick up...
Lol learn to pronounce your "th"s on all your words, not just some.... sounds silly.
A whole video about undervolting a pc and that’s all you have for a comment? 😂
I have that exact rig but with a zotac solo and 5700x I see gpu temps at 78° and CPU temps at 86° underload and haven't undervolted or overclocked
Those temps sound about right for a case like this, especially with a more powerful cpu like the 5700x