Great Video, seen your Videos before. Very easy to follow your instructions and explanations how to do it. Accolades for you Expertise in these situations. Thank You. Keep up the good work.
Thank you very much Master🙏🙏🙏I have been studying electricity for 3 months!!!! But let me tell you something!!!You are a good instructor 🙏🙏God bless you
That's a great video. I've been fixing electrical installations for years, and have never seen some of the equipment you used. Pushing wires around and twisting wire nuts, I have caused some damage to my thumbs, wish I had known about the Voltclaw sooner. I've never heard of a Level Plate before either, but I have been using caterpillars ... they work well.
shouldn't we be clipping the top and bottom metal endings with round "ears" leaving only central attach points, when it goes into a box? those are the ones that stick out.
Hi! Love your videos. I have a situation not covered here. I have 2 light switches in a box and they are not horizontally aligned, so when I put the switch cover on (with 2 switch openings) I can only install the screws on one of the sides. I haven't seen anywhere a discussion of how to adjust the vertical direction of boxes so that two side by side boxes line up and you can use a double switch plate cover. Can you help? Thanks!
Do crooked cfgi pose any danger? Its in a bedroom that i switched out a two prung outlet and it fits tight but theres room. You can easily see the crookedness
ok, but how do you fix it when the junction box is installed crooked? My switch cover it tilting a few degrees. Looks ghetto as fuck. Not only do every single light switch cover is off, even the damn AC vent is crooked. American ingenuity at best!
Have you checked to make sure the floor is level? Is one of your legs shorter? Have you consider prying out the existing box and installing an old work box?
This is exactly what I needed. I just bought a new home that was built by idiot clowns and everything electrical so far is backwards or wrong or not working. Gotta love it. 🙄
Great Video, seen your Videos before. Very easy to follow your instructions and explanations how to do it. Accolades for you Expertise in these situations. Thank You. Keep up the good work.
Thank you so much! 🙏🏽😊
Thank you very much Master🙏🙏🙏I have been studying electricity for 3 months!!!! But let me tell you something!!!You are a good instructor 🙏🙏God bless you
Thank you so much! 🙏🏽😭
Straight forward. Many tips in a short video. I learn many things here today. Thanks so much.
Thank you! I had that box with the screws that was crooked. Brilliant fix. I will try it. Subbed.
Thanks for the solution. Best video on how to do it.
I learned so much from this video. Very comprehensive.
Thank you so much! 🙏🏽😊
Thanks so much for this video! Now I know how to fix with a sloppy contractor did.
Nice!!! The one on my dining room is crooked! This will help me.
Sweet! Yeah bro, make sure you turn off power from your breaker! 👍🏽
Moving the wires around did the trick. Easier than I thought it would be. TU
That's a great video. I've been fixing electrical installations for years, and have never seen some of the equipment you used. Pushing wires around and twisting wire nuts, I have caused some damage to my thumbs, wish I had known about the Voltclaw sooner. I've never heard of a Level Plate before either, but I have been using caterpillars ... they work well.
Thank you so much! Yes the VOLTCLAW is a very helpful gadget. 🙏🏽😊👍🏽
Love the details!
Thank you 🙏🏽!
The builder of my house used 10 gauge wire for all the outlets and I am literally dying.
Thanks for posting the fixes. I like the metal plate but it is for single gang only. Is there a dual gang version?
Thank you! You can use two singles for a double gang just put them side by side and will even work for a triple gang 👍🏽😊
Thanks for all the tips!
You are very welcome! Thank you for watching! 🙏🏽😊
shouldn't we be clipping the top and bottom metal endings with round "ears" leaving only central attach points, when it goes into a box? those are the ones that stick out.
It's not necessary unless you're using an old work box or mounting to a 4x4 metal box cover.
Excellent 😊😊😊 Video! Thanks Sir !
Hi! Love your videos. I have a situation not covered here. I have 2 light switches in a box and they are not horizontally aligned, so when I put the switch cover on (with 2 switch openings) I can only install the screws on one of the sides. I haven't seen anywhere a discussion of how to adjust the vertical direction of boxes so that two side by side boxes line up and you can use a double switch plate cover. Can you help? Thanks!
Hi! Thank you for reaching out! If you can send me a picture to my email please so I can take a closer look: fixthishouse1@yahoo.com thank you 🙏🏽
I pulled things apart and managed to align the boxes. Thanks for your videos!
Do crooked cfgi pose any danger? Its in a bedroom that i switched out a two prung outlet and it fits tight but theres room. You can easily see the crookedness
Did you use an impact driver or drill? Thanks!
Do you literally strip every screw?
What if the J-box is against a masonry wall?
Very helpful your videos dude 👍🏻
I have an outlet box that is so crooked that I cannot fit a cover plate over it. What do I do?
Remove the existing box and install an old work box?
Great content, thank you!
Thank you so much! 🙏🏽😊
thank you
u should use a drill-driver with clutch adjustment, u r stripping the screw heads
Will do! Thank you 🙏🏽
Great tips! Thanks!
Thank you for watching! 🙏🏽😊
WOW
👍🏽😊
Damn it hate this. Just changed some switches and it's happening to me.
ok, but how do you fix it when the junction box is installed crooked? My switch cover it tilting a few degrees. Looks ghetto as fuck. Not only do every single light switch cover is off, even the damn AC vent is crooked. American ingenuity at best!
Have you checked to make sure the floor is level? Is one of your legs shorter? Have you consider prying out the existing box and installing an old work box?
@@georgebush6002 ? You mean why not use a level to see if the switch cover is level? Idiot.
This is exactly what I needed. I just bought a new home that was built by idiot clowns and everything electrical so far is backwards or wrong or not working. Gotta love it. 🙄
Great Video thank you so much. ( Subscribe )
Thank you 🙏🏽 so much!