Scotty’s Car is going to need a Barra lol! Nugget garage just built a mang v6 turbo on 15 psi and made near 370 rwhp. This wouldn’t surprise me if was nearly double. Scotty is going to get taught a lesson lol!
Fyi, that tone wheel needs to go on the other side of the diff flange. Having it between the tail shaft and diff flange put the balance way off and youll have one hell of a vibration over 80ks.
Couple questions from the States here; What kind of transmission, could you do a Barra buyer's guide, how can I get one in or to the U.S., and does anyone make a plastic mock up engine...
Anyone know a good place for engine work in Melbourne, I have a Brock B8 that's been off the road since 2012, engine unfortunately is already modded, so was looking at throwing in a Barra if I can find 1
looking forward to the race. talking about PIDS years ago a mate used VCM to change one of my PIDS in BA to show Police on the dash and it reads out an a digital speed. i lost my avg fule and all that stuff anyone out there tell me how i can get it back to factory PIDS?
GRRRRR.......@#$%#@ AU and Barra starter motors !!!! Bane of my life when there is no hoist available. Can't see top bolt and #@#$ extensions either too long or too short. Loved the trans fluid !!!!
Im doing ed xr6 backdate to look identical ea s pac lol identical this to this has black convo runners t5 n a bf barra gas motor just bout to do built manualized btr conversion 3k convertor n start low mount set up on the gas bf motor
Scotty's VN will get absolutely destroyed an we haven't seen the EAs power yet I just know
Yeah I like the content but don't know what the point is either. Haha
lol so true maybe the commodore takes off quicker but the falcon will win in the top end
Johhny is the man love his humor
that Big angry Man at 11:37 does he have import papers??
this thing will Smoke Scottys Holden
Top job guys. Car is going to be a ripper. You're getting the hang of this RUclips thing too!
that guard rolling was pretty slick. back i the day we used to use a baseball bat on top of the tyre .worked a treat
"Budget" Hahahahahahahahaha. Mad AF tho
lol big budget haha
10k is a good budget for 10s.
I got very anxious seeing 2 x wheelnuts on the rears, when you put it on the dyno. Fingers crossed👍🤞🤞🤞
Scotty’s Car is going to need a Barra lol! Nugget garage just built a mang v6 turbo on 15 psi and made near 370 rwhp.
This wouldn’t surprise me if was nearly double.
Scotty is going to get taught a lesson lol!
rolling rear guards AND NO RUST FELL OUT... IMPRESSIVE!
See the thing is, you're making it look too bloody easy guys!
Really enjoying the build, wouldn't be surprised to see it run a 9 on it's first hit
Car is rad definitely loving the channel vibes 🥂🔥🔥
Great video, its nice to see how much fun you have doing this stuff. Hey, what were those rear wheels you put on it for the Dyno run?
Fyi, that tone wheel needs to go on the other side of the diff flange. Having it between the tail shaft and diff flange put the balance way off and youll have one hell of a vibration over 80ks.
I`m interested in what brand cooler your running. Also running a BTR on a budget. Keep up the great work guys, plenty of info which helps
U fellas would be a fkn ball to hang with I say. I’d love to turbo my ED but a lot less budget than you guys have but fuck it would be cool to do it
This is such a nice build.
Nice boosted falcon sticker
tx5brent it’s needfordspeed’s old car....
Ah, the shell has done mid 10's already, so should do an easy 7.xx with all the Barra fanboys behind it hahaha
to think.
years ago this very car i was going to demo derby :P
What a guy that John is ay.
I’m a holden man but this will kill scottys nugget lol
Which model did you get the tail shaft from? e series or b/fg? Sik build and very helpful info. Thanks
Stock e series shaft to suit btr
@@maxxperformance1613 Cheers. Legend
The exhaust is worth more than my car 😂
Couple questions from the States here;
What kind of transmission, could you do a Barra buyer's guide, how can I get one in or to the U.S., and does anyone make a plastic mock up engine...
Anyone know a good place for engine work in Melbourne, I have a Brock B8 that's been off the road since 2012, engine unfortunately is already modded, so was looking at throwing in a Barra if I can find 1
Finally!! Im doing the same build lol
Fuck I have been ya hanging for this episode as I’m running same engine,turbo and manifold hope it’s good news 😆🤘🏻 now let’s go watch and see 🙏🏻
Nooooooooooooo I need dyno episode
Is it laggy I’m running the 72mm borgy on my build also with CRG promod manifold with th400
That cooler fitment lol.. I’m saying 500+rwkw
What is / was that device sitting on top of the brake master cyl reservoir ? Some sort of auto top up system ?
Yeah exactly that, damn handy too. Most auto parts stores have them, or versions of 🤙
looking forward to the race. talking about PIDS years ago a mate used VCM to change one of my PIDS in BA to show Police on the dash and it reads out an a digital speed. i lost my avg fule and all that stuff anyone out there tell me how i can get it back to factory PIDS?
GRRRRR.......@#$%#@ AU and Barra starter motors !!!! Bane of my life when there is no hoist available. Can't see top bolt and #@#$ extensions either too long or too short. Loved the trans fluid !!!!
can someone tell me what they had on their brake master clynder?
Great watch whole thing ... no idea about any of it
I would drive my g6et from Sydney to get a tune
i wouldnt
How much was the budget... Or how much roll in and out .... 👌🏽😍
What width n offset are those rear street pros please? N what size et u running? How big is your convertor
Im doing ed xr6 backdate to look identical ea s pac lol identical this to this has black convo runners t5 n a bf barra gas motor just bout to do built manualized btr conversion 3k convertor n start low mount set up on the gas bf motor
Any suggestions on a barra swap into a hq wagon...diff...trans
9 inch, which are just common and easy. Ideally a whole engine and trans package from an FG for running gear.
Yeah, put a chev in it.
Hell yeah
My dad's, uncle's, great grandmother's car would absolutely chop it.
Do you build any cars for men?
Bring it to calder ;)
& we can build you a car whatever gender you identify as homie!
@@maxxperformance1613 xD
Even if im an apache hellicopter?
How much in parts alone already is in this "budget" build ...?
This is not a budget build by any means. A budget build is something that can replicated by someone at Minimal cost.
11:54 please don't tell me you ran that on the dyno with only 2 wheel nuts on each wheel?
Negative! We purely backed it off the hoist and onto the Dyno for the end of the video and filming. The car has since had all new wheelnuts fitted!
@@maxxperformance1613 nice 🤣🤣🤣
Still got the heavy breathing cameraman 😂
When’s the next episode comin out??
This weekend all going well!
Maxx Performance this evening??
❤️
Love the shape of the ed falcon,
don't use 400 sires hose on high pressure fuel, i almost burnt my vz down and luke lsm did on the dyno... it isn't approved by ANDRA ect
yeeeee
Build a territory
Haris Tubic they already have a shop territory with big power
Ummm 🤔, did I see only see 🧐 a few wheel nuts in the back wheels when you rolled it onto the dyno.? 😱
You did! We purely backed it onto the Dyno for filming. It has 20x new wheelnuts now. (When it was run up)
Carnage has no chance..
give it another month for the next video and we will see the results lol
Good video! Keep it up! Would you like to be RUclips friends? :)
Way faster and easier using a heat gun and nylon thor hammer to "roll"your guards
Not good practice to the earth to the welder on the pinion when welding something to the diff housing just saying
Correct! Was just a few tacks diff is fine no stress. #ourbad
I'm glad someone else noticed.
u guys are funny as fuck ... LOL ....
What did John say? I don’t speak sheep 🐑
First comment 👌
third up !!!!!!!!