Instead of getting only high and low values, how can we get the values with multiple levels? One reference had levels at -1.682, -1, 0, +1, +1.682 for the time, temperature and pressure. Also, if you have any video regarding this, please share the link as well.
Thanks a lot for the valuable knowledge. It would be perfect if you mentioned about R-sq value and eliminating of the interactions which is determined by their P-Values in the model.
hi, I'm working on laser-assisted turning and currently experimenting with five parameters: depth of cut, feed rate, spindle speed, laser power, and laser angle (the distance between the laser spot and cutting edge). Initially, I opted for a face-centered central composite design. However, I've noticed that when the laser power is set to 0 (indicating the laser is off), the laser angle becomes irrelevant. I'm uncertain about the appropriate experimental design in this situation. Could you please suggest a method or name for this scenario, considering the disregard for laser angle when laser power is zero? Thank you for your insights!
Question : In your process you are ranging the pressure range from 220 up to 732 PSI and temperature from 32 to 68 oC, but minitab is proposing pressure of 114 PSI and 838 PSI as well as temperature as low as 24.5 and as high as 75.5 oC. In the real life this might be unsafe to test. What would you propose doing?
Good day, Sir. Thank you for that informative presentation. I just want to clarify if I could use RSM if I have 4 controlled variables and 1 response variable only? I actually want to use RSM for optimization of a polyherbal formulation (4 components) for my thesis but in the journals i have seen so far, they always have 3 response variables but I am planning on having one response variable only and I just don't know if it is possible because we never had this in school. . . . I hope you don't mind clarifying it for me. . . Thank you so much!
Good day sir, of course we can sir. Actually the controlled variables are the independent variables and the response is the dependent variable. For a simple case if we had independent variables of X1 and X2, it can be expressed that the dependent variable Y is the function of X1 and X2. Y = f (X1) + f (X2) + e Where, e = experimental error Response surface is a method based on surface placement. Therefore, the main goals of a RSM study are to understand the topography of the response surface including the local maximum, local, minimum and ridge lines and find the region where the most appropriate response occurs, I hope my explanation can help you. Thank you
Hello, what do one do, in box behnken design when the number of response is less than the total numbers of run. Pls i would appreciate your speedy response sir. Cheers
Hello sir, Hope you are fine. I want to use this software for my article. but can you tell me how can I download it? Is it paid or free? please let me know more information about this software! Thank you for your time.
sir, i am doing a comparative study for my thesis and using rsm to obtain the optimum condition of the result. is this steps are applicable because i do not have sufficient amount of response variable?
In order to know that you must try first, and go to the interpretation, I am sorry, I will create the interpretation for this soon enough insha'allah. Remember to know your model fit or not, compatible or not you must do the DOE first, and repeatability also important to be considered.
Assalamualaikum wrwb, I have to do RSM to optimise my reaction conditions but every time I get insignificant results. Please plot 3d surface plots for me. I am trying to do for more than a year. Need your assistance. Allah SWT bless you.
Hi Sir, the levels define can only be set between low and high, right? or can we set the levels as we want to?
Thanks for this video...definitely it is going to help me.
Worth watching your content.
Thank you do much. I am waiting for the interpretation of results.I hope it uploaded very soo.
Instead of getting only high and low values, how can we get the values with multiple levels? One reference had levels at -1.682, -1, 0, +1, +1.682 for the time, temperature and pressure. Also, if you have any video regarding this, please share the link as well.
Thanks for video big like
🌹🌹🌹🌹
Thanks a lot for the valuable knowledge. It would be perfect if you mentioned about R-sq value and eliminating of the interactions which is determined by their P-Values in the model.
Nice explanation, thank you so much
hi, I'm working on laser-assisted turning and currently experimenting with five parameters: depth of cut, feed rate, spindle speed, laser power, and laser angle (the distance between the laser spot and cutting edge). Initially, I opted for a face-centered central composite design. However, I've noticed that when the laser power is set to 0 (indicating the laser is off), the laser angle becomes irrelevant. I'm uncertain about the appropriate experimental design in this situation. Could you please suggest a method or name for this scenario, considering the disregard for laser angle when laser power is zero? Thank you for your insights!
Question : In your process you are ranging the pressure range from 220 up to 732 PSI and temperature from 32 to 68 oC, but minitab is proposing pressure of 114 PSI and 838 PSI as well as temperature as low as 24.5 and as high as 75.5 oC. In the real life this might be unsafe to test. What would you propose doing?
Mr, im very new to RSM. What is the difference between stdorder & runorder?
Thank sirrr
W Salam interesting
Very informative sir... Thank you so much..
Welcome
Dear Prof. Thanks for this valuable presentation. It is very useful. Please also discuss the interpretation of the results, graphs,
etc. Thanks.
Tks prof, appreciate, inshaallah for the next content
Thankyou so Much Sir.
Good day, Sir. Thank you for that informative presentation. I just want to clarify if I could use RSM if I have 4 controlled variables and 1 response variable only? I actually want to use RSM for optimization of a polyherbal formulation (4 components) for my thesis but in the journals i have seen so far, they always have 3 response variables but I am planning on having one response variable only and I just don't know if it is possible because we never had this in school. . . . I hope you don't mind clarifying it for me. . . Thank you so much!
Good day sir, of course we can sir. Actually the controlled variables are the independent variables and the response is the dependent variable. For a simple case if we had independent variables of X1 and X2, it can be expressed that the dependent variable Y is the function of X1 and X2.
Y = f (X1) + f (X2) + e
Where,
e = experimental error
Response surface is a method based on surface placement. Therefore, the main goals of a RSM study are to understand the topography of the response surface including the local maximum, local, minimum and ridge lines and find the region where the most appropriate response occurs, I hope my explanation can help you. Thank you
When to select block and when to select unblock? Could you please clarify
in the table, you calculated the response retention time but how, you have 2 or 3 factor ?
why the factor retention time is the colon of the response
Hello, what do one do, in box behnken design when the number of response is less than the total numbers of run. Pls i would appreciate your speedy response sir.
Cheers
Hello sir, Hope you are fine. I want to use this software for my article. but can you tell me how can I download it? Is it paid or free? please let me know more information about this software! Thank you for your time.
Thank for this Video
You're most welcome
Please explain response surface methodology to estimate the stability derivatives of an aircraft
If the box in the initial step at min 2.11 for example 10 continuous factor, and it is blank. What does it mean?
thank brother
what is the minimum experimental data required to run RSM,,,
sir, i am doing a comparative study for my thesis and using rsm to obtain the optimum condition of the result. is this steps are applicable because i do not have sufficient amount of response variable?
In order to know that you must try first, and go to the interpretation, I am sorry, I will create the interpretation for this soon enough insha'allah. Remember to know your model fit or not, compatible or not you must do the DOE first, and repeatability also important to be considered.
@@scienceroast9558 thank you sir
Assalamualaikum wrwb, I have to do RSM to optimise my reaction conditions but every time I get insignificant results. Please plot 3d surface plots for me. I am trying to do for more than a year. Need your assistance. Allah SWT bless you.
thanks so much,
Thks for ur video
You're most welcome
From where to get response value sir
please how to calculus response retention time ? how
Thank U..
Please explain or interpret the interaction plots for me naaa...please. Allah will bless you
how do you get your result in excel?
From the experiments
nelerle uğraşıyoz be
Kolay gelsin knk bu uğraşmalarının sonucu öğrendin mi şunun nasıl yapıldığını :D
@@muhendisfurkanbey7204 keşke bizde adımızın önüne mühendis yazsakta senin gibi şap diye anlama yeteneği kazansak he bir de bey var tabi
Ve Aleykumselam
ＨＩ
Thanks a lot