Hello, José! Thank you very much! Domain rc 2016: Drive Side: Motion Control IS 200 mL (dual crown325 mL) 5w oil, Lower leg 10 mL 15w oil Non-Drive Side: Coil Grease Lower leg 30mL (dual crown 40 mL) 15w oil
Thank you! I can't give you a track list because i don't know names of tracks. It is free youtube music. You can listen for it in your youtube author audiothek
Скоро выйдет видео с вопросами и комментариями, где можно будет проголосовать, добавлять ли русские комментарии к видео или нет. Основная публика является англоязычной.
Thank you, Lucas! Grease is pretty messy stuff and I put grease off-camera. In marzocchi fork you need not use grease because oil in lower legs going up and down when fork works.
What products like oils did you use?.. And what grease?. And is this service the same as 180mm rc domain forks. But i have the blue control knob ontop of my fork so does this make any difference?? Thank you
Hello, Rusty! I prefer to use motorex oil and greace.After motul, liqui moly and other oil fork seals become hard and performance not as good how I like. Maybe it was fake oils, I don't know. Yes service of R and RC models are the same. Blue knob on your fork is compression adjustment, which is missing on R version. For understand whats inside of RC model, you can watch this video goo.gl/4qfyke . I hope this information will help you! Cheers!
Thanks, Mate! Yes, you can! If your bike frame can handle forks with 180-200mm of travel, if not I recommend you do not install this long travel forks on your bike frame ( It can be broke ).
Если есть вопросы, попытаюсь ответить. А на счет пружины, точно сказать не могу. Вилка б/у и меняли там что-то или нет, я не знаю. В этой стояла красная.
Не понятен момент в конце, когда уже заливает масло в штаны, на видео он вроде штаны чуть поддергивает и смещает дабы масло именно в штаны попало а не по штокам в ноги? Как тогда смазывается пружина?
Масло из штанов без препятствий попадает в ногу с пружиной в виду отсутствия сальников со стороны штока (именно по этой причине, в ногу с пружиной заливается больше масла) . В ногу с пружиной 40мл, в ногу с картриджем 10мл. Если видео смотреть внимательнее, то все нюансы конструкции можно уловить, даже не зная языка.
hello a query You know I have a domain R but I wanted to know if I can install a compression damper to convert it to rc? I am looking forward to your response
Hello, Jorge. I think you can convert your domain R into RC by installing compression cartridge. I have no any guarantee but I think these forks are the one fork with or without compression cartridge.
@@AXRV88 thanks thanks some orientation if it has to be the cartridge specifically from domain or it can be from a boxxer fork and if so what would it be?
You're welcome, Jorge! Try to find compression cartridge from domain RC. May be from boxxer will fit, but it is lottery. I don't know about compatibility of domain and boxxer.
Spring change is pretty simple. All you need is open upper cap on leg which has no adjustments on upper and lower side ( this is spring leg) Other leg which has adjustments is cartridge leg and contains oil, not a spring. I hope this information will help you! P.S. I have no this fork for now for recording videos about it. Sorry.
Hello! I haven't repair any domains 2015 MY yet. I think they can be similar, because rockshox make forks which has spring or air in one leg and oil in other leg.
Gidix, R or RC comes from settings which you fork has. For example if you can change rebound and compression, you have RC version. If you can change only rebound it's R version.
Yes, i mean to pry it gently. But the best way to repair your fork is to bring it to the local shop. Because all operations you will do with your fork is for your own risk, you can broke something.
Привет, друг!! Отличное видео. Как раз собрать перебрать свой домеин первый раз. Есть пара вопросов. Где найти сальники и правильно я разглядел размер 35х45х7? Какое масло ты набивал между сальником и пыльником? Литол пойдет*?
Привет! Спасибо! Размер сальников верный. Эти сальники заказчик покупал в магазине специализирующимся на сальниках и подшипниках. Между сальниками и пыльниками необходимо применять густую, не агрессивную к резине смазку, например густую смазку Motorex. На свой страх и риск можно любую смазку использовать. Как вариант, можно сделать колечки из поролона и пропитать их вилочным маслом ( вместо густой смазки ). Удачи в переборке! P.S. если опыта переборки подобных вещей нет, советую быть крайне аккуратным либо обратиться к специалисту.
Спасибо что ответил) Я из села и спецов тут нет поблизости, поэтому лучше меня самого врядли кто сделает. А оригинальные сальники/пыльники на РШ домеин в инете практически нереально найти. В общем удачи каналу. Подписался!
spring fork, uses coil and oil :3, i had it for years and i'm just 18 years old so i'm always out in city and bikeparks, bought the bike used with it mounted, it's a low maintenence fork, i just have bought the essential to do services to it after 6 years (i did maintenence just one time now i'm gonna do it more times)
@hubix pl, from factory springs come in grease, because of in spring chamber is no seal in the bottom. I think if you add oil in spring side, all oil will come to bottom legs.
I dont know why people hate domain so much it is like rc but little different
Спасибо что показал шаибы под крышкой пружины.
Hi, good video,👍 Can i replace spring with only remove top cap?
Hello and thank you! Yes, you can!
I whant this shox please link
Hi!
Perfect video.
You know if the domain rc 2016 650b use the same oil and quantity?
Cheers from Chile!
Hello, José! Thank you very much!
Domain rc 2016: Drive Side: Motion Control IS 200 mL (dual crown325 mL) 5w oil, Lower leg 10 mL 15w oil
Non-Drive Side: Coil Grease Lower leg 30mL (dual crown 40 mL) 15w oil
God took Jimi Hendrix way too early but thankfully left us Randy Hansen
is it the same with the Single Crown domain r ??
I think yes, but with decreased length.
GOD bless you
Thank you, my friend!
Track listing please_?
Superbly Done
Thank you! I can't give you a track list because i don't know names of tracks. It is free youtube music. You can listen for it in your youtube author audiothek
oh its just coil n oil suspension??
no air no rebound / no compression adjuster???
it does have reboud... , you can add compression with like 50 dollars... its called motion control rockshox and you can do it by yourself very eaasy
Would the process be the same for the single crown forks? Also, great video man!
Thanks! I think process is the same, but you can't remove legs from forks crown.
Buenas... disculpe que aceite entran disculpe..???
Buenas. 5 o 7.5 W
I can use 10w oil?
Down and up?
You can use it if it's fits your goals.
hi whats in the other leg ? good video btw
Hi this is a simple fork. Spring on the one side and rebound on the other side.
Эх, с комментариями бы...(((
Скоро выйдет видео с вопросами и комментариями, где можно будет проголосовать, добавлять ли русские комментарии к видео или нет. Основная публика является англоязычной.
Nice vídeo, u dont put grease in coil spring?
Thank you, Lucas! Grease is pretty messy stuff and I put grease off-camera. In marzocchi fork you need not use grease because oil in lower legs going up and down when fork works.
Hi there, where to bay service kit for this forks? Any link will help. Thanks
Hi. Try to search on ebay. Many different parts are there.
What products like oils did you use?.. And what grease?. And is this service the same as 180mm rc domain forks. But i have the blue control knob ontop of my fork so does this make any difference??
Thank you
Hello, Rusty! I prefer to use motorex oil and greace.After motul, liqui moly and other oil fork seals become hard and performance not as good how I like. Maybe it was fake oils, I don't know. Yes service of R and RC models are the same. Blue knob on your fork is compression adjustment, which is missing on R version. For understand whats inside of RC model, you can watch this video goo.gl/4qfyke . I hope this information will help you! Cheers!
@@AXRV88 hi mate. Thank you for replying back and i will definitely check out the link. Thank you
YOu're welcome, buddy! And if you have any questions feel free to ask!
spasiba
Hi I messed this up (my fault) but the dampening rod keeps getting sucked to the bottom and I can’t tighten the bolt what should I do
Hi Try to unscrew top cap and use something long and clean to push damper rod.
Unscrew bottom bolts to half and hit them with rubber hammer :) it's better than hitting lowers
You're right. I had not record the moment when I hit bolts with hammer and wood block.
Nice video! I was wondering if I could fit these forks on to replace my Rockshox Tora? Is that possible?
Thanks, Mate! Yes, you can! If your bike frame can handle forks with 180-200mm of travel, if not I recommend you do not install this long travel forks on your bike frame ( It can be broke ).
Gibt es einen link für die Dichtungen ?
Sorry. Ich habe kein link für die Dichtungen.
Жаль что субтитры не русские. Я правильно понимаю, что в стоке у домейна стоит красная пружина?
Если есть вопросы, попытаюсь ответить. А на счет пружины, точно сказать не могу. Вилка б/у и меняли там что-то или нет, я не знаю. В этой стояла красная.
Отличное видео! Молодец! (rus)
Спасибо, Степан! Вам стоит заглянуть в плейлист "Bike repair", там много интересного!
Не понятен момент в конце, когда уже заливает масло в штаны, на видео он вроде штаны чуть поддергивает и смещает дабы масло именно в штаны попало а не по штокам в ноги? Как тогда смазывается пружина?
Масло из штанов без препятствий попадает в ногу с пружиной в виду отсутствия сальников со стороны штока (именно по этой причине, в ногу с пружиной заливается больше масла) . В ногу с пружиной 40мл, в ногу с картриджем 10мл. Если видео смотреть внимательнее, то все нюансы конструкции можно уловить, даже не зная языка.
hello a query You know I have a domain R but I wanted to know if I can install a compression damper to convert it to rc? I am looking forward to your response
Hello, Jorge. I think you can convert your domain R into RC by installing compression cartridge. I have no any guarantee but I think these forks are the one fork with or without compression cartridge.
@@AXRV88 thanks thanks some orientation if it has to be the cartridge specifically from domain or it can be from a boxxer fork and if so what would it be?
You're welcome, Jorge! Try to find compression cartridge from domain RC. May be from boxxer will fit, but it is lottery. I don't know about compatibility of domain and boxxer.
Does anyone know if rockshox sells the motion control is for the R fork
Yes, of course! You can buy it separately like a part.
Hello can you tell me the name of the oil for the lower legs. Also Nice video.
Hello! You can use any fork oil 15w - 25w. And thank you.
@@AXRV88 ok thanks ,but you what you use?
Alex, I like motorex oil or motul oil. But you can use liqui moly and etc.
@@AXRV88 i have an other question , how do you clean the lower legs .
I prefer to wash it with hot water and soap. But you can use gasoline if you want. The best choice is a break cleaner, but it's not cheap.
bro, my domain 318 is going up an oil risk by lowering it ... do i need to change the retainer? or can i just make their springs smaller?
Gustavo653, yes you can try to shorten springs on oil seals. If it will not help, you must change oil seals and dust seals as well.
@@AXRV88 can i use 10w oil in the lowers?
Yes you can, but it's too thin. Than thicker than better. Btw your 10w oil will work too.
Wich one is the spring side because I only want to change my spring to a harder one? Can you pls do a video how to change the spring?
Spring change is pretty simple. All you need is open upper cap on leg which has no adjustments on upper and lower side ( this is spring leg) Other leg which has adjustments is cartridge leg and contains oil, not a spring. I hope this information will help you!
P.S. I have no this fork for now for recording videos about it. Sorry.
@@AXRV88 OK thanks a lot
You're welcome, Louis!
Hey will this work with my domain 2015 forks on my giant glory 2
Hello! I haven't repair any domains 2015 MY yet. I think they can be similar, because rockshox make forks which has spring or air in one leg and oil in other leg.
AXRV88 ok thanks did the research so the measurements are the same and similar process just might need different seals (same Wt oil)
You're welcome! But this fork isn't mine. I have no possibility to make measurements.
Can i use 7.5w lower legs?/boxxer team 2010
I think you can. But not sure, because thicker oil works better on bushings in lower legs.
AXRV88 sure i bought rock shox 15wt like in service kit
Joe know if I have domain dual crown R or domain dual crown RC
If its a r it will just have rebound adjustment if its rc it will have comresion adjustment and rebound
Gidix, R or RC comes from settings which you fork has. For example if you can change rebound and compression, you have RC version. If you can change only rebound it's R version.
Hello! I have a 2012 marzocchi 55 rs fork...does it have oil on the coil spring side?
Hello! I prefer to add some oil in spring leg, but manufacturer suggest to grease up spring.
@@AXRV88 thanks! About the rebound side.. Any idea how to service the upper legs on the rebound? There's no nut or grup screw to open
Eugene. I think under the tune knob exist surface for socket wrench. Try to pull the knob gently.
@@AXRV88 there's nothing there, the tune knob for rebound can be seen on the left side of the fork when riding.. Do u mean try to pry it open gently ?
Yes, i mean to pry it gently. But the best way to repair your fork is to bring it to the local shop. Because all operations you will do with your fork is for your own risk, you can broke something.
What size is the dust seal pls tell me
Hello. I can't tell you the size because i don't watch it. I just swaped it.
Oh OK thx
it's the boxxer compatible, it's 35mm@@kianangelopatino3402
What would happen if I over tighten the bolt
@kianangelopatino3402, you can broke the bolt or threads
thanks for this video
You're welcome! Please share this video with your friends, it will help the channel.
Привет, друг!! Отличное видео. Как раз собрать перебрать свой домеин первый раз. Есть пара вопросов. Где найти сальники и правильно я разглядел размер 35х45х7? Какое масло ты набивал между сальником и пыльником? Литол пойдет*?
Привет! Спасибо! Размер сальников верный. Эти сальники заказчик покупал в магазине специализирующимся на сальниках и подшипниках. Между сальниками и пыльниками необходимо применять густую, не агрессивную к резине смазку, например густую смазку Motorex. На свой страх и риск можно любую смазку использовать. Как вариант, можно сделать колечки из поролона и пропитать их вилочным маслом ( вместо густой смазки ). Удачи в переборке! P.S. если опыта переборки подобных вещей нет, советую быть крайне аккуратным либо обратиться к специалисту.
Спасибо что ответил) Я из села и спецов тут нет поблизости, поэтому лучше меня самого врядли кто сделает. А оригинальные сальники/пыльники на РШ домеин в инете практически нереально найти. В общем удачи каналу. Подписался!
Всегда пожалуйста! Будут вопросы, отвечу как будет возможность. И спасибо за пожелания!
Why did you not put a foam dust seal in between the other 2 seals?
Maybe in video I did not show, but both seals and foam rings impregnated in oil are installed in both sides of fork.
Oh sweet! Thanks!
Andreas, you're welcome!
Thanks
I appreciate your support! Thanks for being a part of this community.
Can you use grease instead of silicone spray to install the seals?
Of course, if your grease is not agressive to rubber.
AXRV88 cheers man👍
You're welcome, mate!
amazing thank you,, :D
You're welcome!
Спасибо, буду пробовать, как раз на гамблере домэйн стоит, надо почитать ещё какого масла сколько залить лучше.
Всегда пожалуйста!
AXRV88 такой вопрос, какое масло лучше лить, температура обычно - 10°- +20°
Pom Ba Рекомендую Моторекс 5W для этих температур.
AXRV88 слушай, после сборки ход стал меньше. Масла много? Или что-то ещё?
Смотря что делал с вилкой. Перелив масла тоже может оказаться причиной срабатывания не на весь ход.
Nice job 😉
Thank you!
Is this air fork?
no
spring fork, uses coil and oil :3, i had it for years and i'm just 18 years old so i'm always out in city and bikeparks, bought the bike used with it mounted, it's a low maintenence fork, i just have bought the essential to do services to it after 6 years (i did maintenence just one time now i'm gonna do it more times)
Your video is very usefull!
Thanks!
@@AXRV88 i have a question
In spring chamber i should pour a oil? Or just cartige chamber?
Cheers from Poland
@@AXRV88 i'm talking about upper tube
@hubix pl, from factory springs come in grease, because of in spring chamber is no seal in the bottom. I think if you add oil in spring side, all oil will come to bottom legs.
@@AXRV88 i understand, thanks
is that a volume spacer just above the spring ??
No, it's just plastic thing which hold spring.
It's a spring fork it doesn't use volume spacers