Hello, Nick, from the USA! Thanks for this informative and entertaining video! I really appreciate the fact that you took the time to address my personal comments/questions regarding the SkxPRO. It appears that the long wait ("supply chain issues") for my newest Hammond could be just a few weeks, and I'm super excited! I see I'm not the only one who is waiting... Cheers!
I had one of these and I found it to be way to complicated to operate, getting the different screens and menus, getting hung up trying to remember how to get from here to there for what I was trying to do. Sold it! Had a XK5 and it just did not like the sound, sold it. Now have the new Viscount Soul 261 and it sounds great. Use it with foot pedals.
There's a slight virtual contact effect on the first preset of the Hammond SK Pro though it doesn't have the same XK-5 keybed. If this effect is done in software instead of hardware on the SK Pro then why doesn't it work via midi from an external keyboard? Hmmmm
Nick. I know this video is older, but my SKX Pro now has the vibrato always on with the piano, even though it says that it's off. I did a factory reset and it's still stuck on. Any ideas?
@@nickfoleyuk Thanks for the quick reply! I called Hammond and the "expert" said he once had bumped the modulate wheel. That was it! He fixed my problem! I never use modulate on a piano but the wheel is 'global'. I programmed that wheel to do nothing in case it gets moved again. Wow, I happened to get a guy there that actually knew what my problem was. This keyboard is crazy amazing!
Any tips you can provide connection wise for live sound. Using with the 3300 leslie. Want to mic the leslie, but also have a direct line out to FOH to blend together. Any tips?
That's a good question and a tricky one. There are a couple of ways to get a unaffected sound out of the organ, with my XK-5 I could use the 11 pin to the Leslie leaving my outputs to go to the desk for example, but for me I use the 11pin for speed switching and go 1/4" in to the Leslie as well so that I can use my Lounsbury Organ Grinder. So we need to split and get a clean signal, which is simple enough. I've seen the NEO Ventilator used to great effect for this. The Leslie for onstage sound and Vent through the FOS. There's a cable that can be bought/made that will control the fast/slow on both the 3300 and Vent I'm told. I think I have one, but have never used it. Blending is interesting, I wonder how it would sound as you would have a moving oscillation as the two fast rotors went in and out of sync. It might sound great, I don't know. For me then, I'd google the speed switching and buy a Vent but I'm not sure I would blend. If you do, please let me know how you get on with it 🙂 Nick
I mostly like this dual keyboard, but that tiny, ridiculous screen is a deal breaker for me. I do like big, colorful touch screens on my keyboards. Some of us do, others not so much. I'm actually quite surprised that the developers didn't have an option to connect an external touch display to this thing. That could have solved this issue for those who really don't like this tiny screen. As for the cost, as a guy who designs fun gadgets, the price of a larger, good, touch screen is not huge anymore. At retail, a 7" or even 10" touch display can go for as little as $100 U$D. The issue here, is that the hardware was not designed with this in mind. If they would have even put a bit larger display on this, that would have been something. If you look at the layout around the display, there is actually room for a larger display. They would have just had to change the position of some text. The controls, where they are, are not actually an issue. Oh well... who knows why certain decisions are made at the development stage.
I got the SKXPro in May. It's the first time i play organ and i'm trying to learn how to play it. The problem that i'm having is trying to get a good organ sound. If you have a chance can you teach us the draw bars you use to get different organ sounds.
Every chance, yes. I no longer have the SKXPro but the effect is much the same on all Hammond. I'd say what sounds right is right but its trial and error basically. We all have our own goto sounds mine would alternate between something like 888854357 and 888854321 for bright and dark sound respectively. A good blues sound can be 880000000 and 888000000 for a light and heavy starter for ten. Some of the lighter sounds, gospel type backing will back off the first two fundamentals 558854356 maybe and then your Deep Purple perfect strangers tone is closer to 88888864 I guess (with Jon Lord basking off that one nearly all the time so its more 86888864). This is a good question for the community, what are your goto settings and why?
Love my skxpro, but I’ve been trying to use it with my leslie 147 and there’s just hardly any volume. I’m using with 1147 connector kit. Not sure if I’m doing something wrong or if there’s something I need to change in the organ settings. Any tips or info you could share would be greatly appreciated.
Generally no, sounds like you are doing it right. You need to boost the signal then? Any way you can get the tall and fat pedal ina line for some warmth and gain?
@@nickfoleyuk the leslie doesn’t have 1/4” line in so I don’t think that’s an option for me here. There’s a slightly used 3300 near me for a good price I think I might jump on that.
I would buy one. But the internal Leslie is too weak. I don‘t want to carry around a Leslie. I use it at home with my B3. If the the SKX pro would have only organ and no extra voices and a better Leslie Simulation, then I would buy it. The presentations on RUclips are mainly not useful. I would like to hear, that someone would play a whole song, who can play the organ on a hight level. So Viscount does a better job in that direction.
Curious: anybody using this with pedal board/expression pedal combo, but wanting a sustain pedal down there too for when you’re doing piano alone? Is there enough room to do that? 🙂
Thank you Nick. You know, it wasn’t until today (Dec 13th 2022), that I watched the whole video, and saw that you already answered this very question of mine on the video itself! Sorry to have asked it again.
Great but how about wooly bully watch it now 😮
Thanks for the video. The more I learn about the SKx Pro, the more I want to buy one!
Hello, Nick, from the USA! Thanks for this informative and entertaining video! I really appreciate the fact that you took the time to address my personal comments/questions regarding the SkxPRO. It appears that the long wait ("supply chain issues") for my newest Hammond could be just a few weeks, and I'm super excited! I see I'm not the only one who is waiting... Cheers!
They both sound pretty good to me. If you're too picky about this stuff, it makes you crazy for no advantage. Play better.
Thanks for the detailed run through on this Hammond(saves me a bunch of money), I still think your XK-5 is fatter, it just breathes!
Thank you for the videos. I find them to be informative and useful. Still waiting for mine to arrive at Sweetwater (in the USA).
I had one of these and I found it to be way to complicated to operate, getting the different screens and menus, getting hung up trying to remember how to get from here to there for what I was trying to do. Sold it! Had a XK5 and it just did not like the sound, sold it. Now have the new Viscount Soul 261 and it sounds great. Use it with foot pedals.
I need to get hold of a Viscount
Thank you.
There's a slight virtual contact effect on the first preset of the Hammond SK Pro though it doesn't have the same XK-5 keybed.
If this effect is done in software instead of hardware on the SK Pro
then why doesn't it work via midi from an external keyboard? Hmmmm
Thanks, Nick.
Nick. I know this video is older, but my SKX Pro now has the vibrato always on with the piano, even though it says that it's off. I did a factory reset and it's still stuck on. Any ideas?
Hi mate, I’m not sure tbh. Contact your local franchise they will be great with this
@@nickfoleyuk
Thanks for the quick reply! I called Hammond and the "expert" said he once had bumped the modulate wheel. That was it! He fixed my problem! I never use modulate on a piano but the wheel is 'global'. I programmed that wheel to do nothing in case it gets moved again. Wow, I happened to get a guy there that actually knew what my problem was. This keyboard is crazy amazing!
I think you can make anything sound good😅
Any tips you can provide connection wise for live sound. Using with the 3300 leslie. Want to mic the leslie, but also have a direct line out to FOH to blend together. Any tips?
That's a good question and a tricky one. There are a couple of ways to get a unaffected sound out of the organ, with my XK-5 I could use the 11 pin to the Leslie leaving my outputs to go to the desk for example, but for me I use the 11pin for speed switching and go 1/4" in to the Leslie as well so that I can use my Lounsbury Organ Grinder. So we need to split and get a clean signal, which is simple enough.
I've seen the NEO Ventilator used to great effect for this. The Leslie for onstage sound and Vent through the FOS. There's a cable that can be bought/made that will control the fast/slow on both the 3300 and Vent I'm told. I think I have one, but have never used it.
Blending is interesting, I wonder how it would sound as you would have a moving oscillation as the two fast rotors went in and out of sync. It might sound great, I don't know.
For me then, I'd google the speed switching and buy a Vent but I'm not sure I would blend. If you do, please let me know how you get on with it 🙂
Nick
I mostly like this dual keyboard, but that tiny, ridiculous screen is a deal breaker for me.
I do like big, colorful touch screens on my keyboards. Some of us do, others not so much.
I'm actually quite surprised that the developers didn't have an option to connect an external touch display to this thing.
That could have solved this issue for those who really don't like this tiny screen.
As for the cost, as a guy who designs fun gadgets, the price of a larger, good, touch screen is not huge anymore. At retail, a 7" or even 10" touch display can go for as little as $100 U$D.
The issue here, is that the hardware was not designed with this in mind.
If they would have even put a bit larger display on this, that would have been something.
If you look at the layout around the display, there is actually room for a larger display.
They would have just had to change the position of some text. The controls, where they are, are not actually an issue.
Oh well... who knows why certain decisions are made at the development stage.
Possible connect external display.?
SKX Leslie sim sounds better than the XK5's.
I got the SKXPro in May. It's the first time i play organ and i'm trying to learn how to play it. The problem that i'm having is trying to get a good organ sound. If you have a chance can you teach us the draw bars you use to get different organ sounds.
Every chance, yes. I no longer have the SKXPro but the effect is much the same on all Hammond. I'd say what sounds right is right but its trial and error basically. We all have our own goto sounds mine would alternate between something like 888854357 and 888854321 for bright and dark sound respectively. A good blues sound can be 880000000 and 888000000 for a light and heavy starter for ten. Some of the lighter sounds, gospel type backing will back off the first two fundamentals 558854356 maybe and then your Deep Purple perfect strangers tone is closer to 88888864 I guess (with Jon Lord basking off that one nearly all the time so its more 86888864).
This is a good question for the community, what are your goto settings and why?
@@nickfoleyuk Thanks for the info.
hello, what are the differences between the SKX and the SKX Pro? I can't find any VS
Love my skxpro, but I’ve been trying to use it with my leslie 147 and there’s just hardly any volume. I’m using with 1147 connector kit. Not sure if I’m doing something wrong or if there’s something I need to change in the organ settings. Any tips or info you could share would be greatly appreciated.
Generally no, sounds like you are doing it right. You need to boost the signal then? Any way you can get the tall and fat pedal ina line for some warmth and gain?
@@nickfoleyuk the leslie doesn’t have 1/4” line in so I don’t think that’s an option for me here. There’s a slightly used 3300 near me for a good price I think I might jump on that.
I would buy one. But the internal Leslie is too weak. I don‘t want to carry around a Leslie. I use it at home with my B3. If the the SKX pro would have only organ and no extra voices and a better Leslie Simulation, then I would buy it. The presentations on RUclips are mainly not useful. I would like to hear, that someone would play a whole song, who can play the organ on a hight level. So Viscount does a better job in that direction.
Curious: anybody using this with pedal board/expression pedal combo, but wanting a sustain pedal down there too for when you’re doing piano alone? Is there enough room to do that? 🙂
Hi Nick, Dose Hammond sk pro used Leslie switch
The external half moon?
There’s a footswitch output but I don’t recall seeing the holes the accept the CU-1.
and is it possible to run the skx pro through your 145 Leslie with the chorus vibrato on c3/c2/c1? to here how it sounds
I’m afraid it’s gone back to Hammond UK now
A travesty using a 1960 C3 as a stand for the instrument on test
Shocker right?
ha ha ha!
Sort of like getting your ex to drive you and your new younger girlfriend to your wedding
@@renhoek3851 LOL! Great comment!
Horn sounds?
Yes.
how does the vibrato chorus section sound ?
Pretty good. None of them full replicate the C3 to my mind but this was as good as anything out there
What’s the difference between an SK Pro & an SKX Pro?
Dual manual
Thank you Nick. You know, it wasn’t until today (Dec 13th 2022), that I watched the whole video, and saw that you already answered this very question of mine on the video itself! Sorry to have asked it again.
I just hate the look of it I’m sure it’s nice but I think Viscount is leading the way now.
Thank you.