Diaphragm pumps

Поделиться
HTML-код
  • Опубликовано: 29 июн 2024
  • Air operated diaphragm pumps are very common in many industry sectors. They are used for pumping a wide variety of fluids, including high viscosity ones. The diaphragm pumps are ideal for pumping chemicals, petrochemicals, waste water, solvents or substances containing solids reaching a few millimetres.
    They are suitable for applications where the pump must be partly or fully submerged in the fluid that is being pumped (then, the air outlet must be extended above the fluid level) or for use in potentially explosive environments (ATEX). The diaphragm pump can run dry without any damage e.g. when one of the lines is blocked.
    The fluid outlet pressure of the pump is the same as the air inlet pressure.
    The body is made of polypropylene, aluminium or stainless steel. The membrane is available in: EPDM, NBR, PTFE + HYTREL®, HYTREL®, SANTOPRENE ™.
    !Remember, that all diaphragm pumps presented can only be used for fluids with a flash point above +55° C.
    0:00 Introduction
    0:24 Diaphragm pump characteristics
    1:37 Diaphragm pump working principle
    2:32 Diaphragm pump in use
    LinkedIn:
    / tubes-international
    Utwór Rock Intro 3 autorstwa Audionautix jest dostępny na licencji Licencja Creative Commons - uznanie autorstwa 4.0. creativecommons.org/licenses/...
    Wykonawca: audionautix.com/
  • НаукаНаука

Комментарии • 12

  • @motofreak.
    @motofreak. 2 года назад +2

    Thanks a lot 💪 great exploration

  • @angelmarco3289
    @angelmarco3289 2 года назад +1

    Thank you for the very informative video!

  • @DanialAdirasaIsmail
    @DanialAdirasaIsmail 27 дней назад

    hi there, is it this air diaphragm pump consider as a rotating equipment?

  • @diaphragmptfe4773
    @diaphragmptfe4773 2 года назад

    This product has high requirements for sealing diaphragms and PTFE balls

  • @muruganmani6590
    @muruganmani6590 Год назад

    This diagram pump suction issue any solution?

  • @crazyDIYguy
    @crazyDIYguy Год назад

    Sounds like a lot of vibration in the design. I wonder how long they last.😬

  • @ikobi
    @ikobi 2 года назад +1

    Hi, can you make pumps with higher flow rate like 100l/s and pumping up 10m? I need this for a hydro electricity project

  • @highpressureplungerpump5989
    @highpressureplungerpump5989 Год назад

    Im diaprm pump senyer

  • @Wehicle123-jg5qe
    @Wehicle123-jg5qe Год назад

    Prise for difragum pump and difragum sir