Good ideas and good work! This is the kind of targets we don't get to use very often but you have given incentive to get into the shop and make a change to my range trips. Thank you!
thanks for sharing this video you are truly a gentleman and a scholar verry inspired. built one for myself having loads of fun with my family once again thank you and GOD BLESS😇👍
Dlc1119 thank you that's is exactly what I did. I went to wal mart and bought two five pound disc weights now all I have to do is get the hardware and attach them. I made this target to use on my archery range and I cannot wait to see how it works out
Such an effective, no-nonsense, I-can-do-it design! Thanks for sharing, Mike (And a big thanks for spending some of your hard-earned retirement time making a video. ;-))
Great idea. I think I would design it so that I could pull the string to lift the weight so to speak.. So I could get it going over and over without having to walk out to it.. It could even have both ideas.. A catch that is like your hinge stick so it resets.. And you have to shoot a steel target to get it swinging.. But could be reset from your shooting position. Would be fun. Lots of ideas. Would require a little anchoring so it doesn't just move toward me, but other than that would not require much. But I never saw something I didn't want to tweak lol. Great job! Thanks for the ideas.
We use a steel knockdown, like the one in my can thrower video, to support the bobber arm. Another option is to tie the pull string to a bowling pin positioned behind and slightly to the side of the bobber. Turn the pull stick so the hinge is to the front and make sure the string is taut.
That would work. Sometimes though, in wet or windy weather, it's useful to be able to mount two or more card targets together to give added rigidity. Not so easy with staples.
@huyked Not sure - probably just a minute or two. Action shooting is usually against the clock and you would take your shots in the first few seconds of the swing. The pivot is lined with steel tube to decrease friction and you could increase the swing time by using a heavier weight and/or using a longer release stick to increase the release angle.
I’d like to say very clever. But that’s the last thing I need is a moving target I’m having trouble hitting one 15 feet away. 🤣 but I will definitely share this video with my other shooting buddies 😉
Very nice, very nice. But I agree you should have a small target as a activation point. Maybe add a wall hiding it so to make it alittle more practical for training.
We sometimes use a half scale pepper popper or similar knockdown target as a trigger. The end of the swinging arm just rests on the top of the knockdown so a hit starts the bobber swinging.
Yes, if the spindle is not exactly at right angles to the uprights the arm will swing at a slight angle, not parallel to the uprights as it should, and the end of the arm may hit the uprights. You could try re-drilling the pivot hole closer to the weight - shortening the swing might give enough clearance for the arm to swing freely.
@bnewtzie The plate weighs 5lbs. The weight is not critical so long as it's heavy enough to balance out the weight of the target and holder, but a heavy weight will swing for longer.
It's not meant to simulate a real-life scenario but if it bothers you just shorten the length of the activating stick and that will reduce the initial angle of swing.
el vídeo es muy interesante quisiera saber si existen otros prototipos de siluetas soy alumno de la escuela militar de sargentos del ejercito de Bolivia y quiero implementar esa silueta al ejercito de Bolivia quisiera mas información espero su respuesta.
If you mean for making the frames then the answer is no - scrap wood is generally free and easily available. I have used corrugated pvc for the targets - the stuff they make real estate signs from. It's ok but most box plants have a dumpster full of reject corrugated board you can have for little or nothing.
Design your own, quietlike. Can't be hard. I designed two wildcat cartridges that are entirely "de novo," meaning "of the new." Total cost for the two shells and the rifles to fire them is around $13,000. You can design and build one of these target swingers easily. Just start sketching...
The holes for the spindle need to be at 90 degrees to the swing arm and uprights so the arm will clear ok - hard to do with a hand held drill. Also the spindle bore needs to be a snug fit. I have about 1 1/2 inch clearance each side between the arm and the uprights and use steel tube spacers and washers to keep the arm centered. Maybe your arms are too close together?
Sorry I have no plans. I made it up as I went along from whatever timber was to hand. There are no critical dimensions - the wood is 3 x 2, 1 x 2 and 4 x 4in and the metal fixings are 10mm and 6mm studding. The weight could be scrap steel plate - the heavier it is the longer it will swing for. Make a spare target holder and release strut - they will get lost or shot up.
+Tiffany Waller Lots of steel discs of various sizes on Ebay. It doesn't have to be round - a piece of 1/2in mild steel 6x6in would be ok. Try a local scrap yard or engineering company.
+Tiffany Waller If there's a place that does laser cutting nearby, ask if they have some suitable scrap. Or a small 2.5 to 5 lb plate from a weight lifter would work.
Good ideas and good work! This is the kind of targets we don't get to use very often but you have given incentive to get into the shop and make a change to my range trips. Thank you!
thanks for sharing this video you are truly a gentleman and a scholar verry inspired. built one for myself having loads of fun with my family once again thank you and GOD BLESS😇👍
Been thinking of making something like this for an archery shoot. Good video!
Dlc1119 thank you that's is exactly what I did. I went to wal mart and bought two five pound disc weights now all I have to do is get the hardware and attach them. I made this target to use on my archery range and I cannot wait to see how it works out
Outstanding I’m gonna try to make one thanks bro
Definitely making a few of these. Just going to have them popping out from behind trees.
Fantastic build sir, thank you for posting.
great video, excellent idea! what a great project for a fun target. thanks for sharing.
Simple but effective! Dimensional information would be nice but you got the point across. Great video Thank you!!
Such an effective, no-nonsense, I-can-do-it design! Thanks for sharing, Mike (And a big thanks for spending some of your hard-earned retirement time making a video. ;-))
Awesome brother. Love it 👍🇺🇸🦅
Very creative and well built. I will be trying this now.
Wow! So very impressed. Strong work, sir.
Thanks for the video man!!!! I will try to do it,greetings from Guatemala!!
You are just full of good ideas.
Very very nicely done, Many Thanks
Great idea. I think I would design it so that I could pull the string to lift the weight so to speak.. So I could get it going over and over without having to walk out to it.. It could even have both ideas.. A catch that is like your hinge stick so it resets.. And you have to shoot a steel target to get it swinging.. But could be reset from your shooting position. Would be fun. Lots of ideas. Would require a little anchoring so it doesn't just move toward me, but other than that would not require much. But I never saw something I didn't want to tweak lol. Great job! Thanks for the ideas.
We use a steel knockdown, like the one in my can thrower video, to support the bobber arm. Another option is to tie the pull string to a bowling pin positioned behind and slightly to the side of the bobber. Turn the pull stick so the hinge is to the front and make sure the string is taut.
WELL DONE!!! I do a lot of shooting on my channel...and this was cool to see=) Excellent work!
Ok I will check on ebay thank you so much . I will be building one of these for my archery range
Love it--thanks for sharing.
That would work. Sometimes though, in wet or windy weather, it's useful to be able to mount two or more card targets together to give added rigidity. Not so easy with staples.
Thank You! Truly!
@huyked
Not sure - probably just a minute or two. Action shooting is usually against the clock and you would take your shots in the first few seconds of the swing. The pivot is lined with steel tube to decrease friction and you could increase the swing time by using a heavier weight and/or using a longer release stick to increase the release angle.
Thanks mate. Amazing :)
This is awesome
i see what you did there . . . a little physics review. nice!
great idea but i would like to see u talking and explaining in detail how to build one of these and how they work.
Thanks for the video LOVE it! :0)
Just what I was looking for
I’d like to say very clever. But that’s the last thing I need is a moving target I’m having trouble hitting one 15 feet away. 🤣 but I will definitely share this video with my other shooting buddies 😉
Very cool idea. Thanks. How long does it swing for, if I may ask?
Genius!!!!!!
Parabéns. Vou tentar fazer um igual
excelente video, muchas gracias, solo falto las medidas y materiales ; )
Hi, love your swinging target. I would like to build one , what is the weight of the metal disk? Thanks
Well done Sir.
Nice work 👏 👌
Clever!
Very nice, very nice. But I agree you should have a small target as a activation point. Maybe add a wall hiding it so to make it alittle more practical for training.
We sometimes use a half scale pepper popper or similar knockdown target as a trigger. The end of the swinging arm just rests on the top of the knockdown so a hit starts the bobber swinging.
Nifty. I can see a fun game if you were to make a prop stick with a target on it, so that you had to shoot it for the target to swing into view.
Thank you
Good job
Yes, if the spindle is not exactly at right angles to the uprights the arm will swing at a slight angle, not parallel to the uprights as it should, and the end of the arm may hit the uprights. You could try re-drilling the pivot hole closer to the weight - shortening the swing might give enough clearance for the arm to swing freely.
Sorry to bother u but do you have Maybe spects or a list of what items u need ?
@bnewtzie The plate weighs 5lbs. The weight is not critical so long as it's heavy enough to balance out the weight of the target and holder, but a heavy weight will swing for longer.
Nice idea
I like it.
Donnie D
Mike coul i get in touch with you about this, would like to ask about sizes and stuff.greetings out the Netherlands
@perryowens1
Ah, true. That's for the tips, and other variables that affect the time. Cheers. Have a great day.
Good job sir
Any idea what the weight “weighs” ?
do you have actual plans I could use so I could build one myself?
Whats on the other side of the fence?
Nice!!
Donnie D
It's not meant to simulate a real-life scenario but if it bothers you just shorten the length of the activating stick and that will reduce the initial angle of swing.
el vídeo es muy interesante quisiera saber si existen otros prototipos de siluetas soy alumno de la escuela militar de sargentos del ejercito de Bolivia y quiero implementar esa silueta al ejercito de Bolivia quisiera mas información espero su respuesta.
If you mean for making the frames then the answer is no - scrap wood is generally free and easily available. I have used corrugated pvc for the targets - the stuff they make real estate signs from. It's ok but most box plants have a dumpster full of reject corrugated board you can have for little or nothing.
Design your own, quietlike. Can't be hard. I designed two wildcat cartridges that are entirely "de novo," meaning "of the new." Total cost for the two shells and the rifles to fire them is around $13,000. You can design and build one of these target swingers easily. Just start sketching...
The holes for the spindle need to be at 90 degrees to the swing arm and uprights so the arm will clear ok - hard to do with a hand held drill. Also the spindle bore needs to be a snug fit. I have about 1 1/2 inch clearance each side between the arm and the uprights and use steel tube spacers and washers to keep the arm centered. Maybe your arms are too close together?
Well done! ...I'm guessing that you don't shoot it in that yard!
Beast
Sorry I have no plans. I made it up as I went along from whatever timber was to hand. There are no critical dimensions - the wood is 3 x 2, 1 x 2 and 4 x 4in and the metal fixings are 10mm and 6mm studding. The weight could be scrap steel plate - the heavier it is the longer it will swing for. Make a spare target holder and release strut - they will get lost or shot up.
mike,potresti darmi le misure totali per poterlo ricreare.grazie
mike,could give me total measurements to be able to recreate.thanks
Great
nice
does anyone have a blueprint for this? At least a parts list?
the video is fine would be nice to actually have plans of how to build
Any ideas where I can find a weight like that?? I live in the u.s.
+Tiffany Waller Lots of steel discs of various sizes on Ebay. It doesn't have to be round - a piece of 1/2in mild steel 6x6in would be ok. Try a local scrap yard or engineering company.
+Tiffany Waller If there's a place that does laser cutting nearby, ask if they have some suitable scrap. Or a small 2.5 to 5 lb plate from a weight lifter would work.
Old gym weights. Those bricks with holes in them.. Lots of options.
what if YOU miss then it will hit them behind the fence
The video was shot in my backyard as the most convenient location. We take it to a range to use it.
Mike Moore ok XD else that would be a little akward
Than it would be a Biden approved target :)
Erik Jordan hahaha mission accomplished
+Blub Force If it didn't miss it would be just as bad. Do you think cardboard is going to stop a bullet?
Good job and I can't believe two assholes actually disliked this.
Why not just staple the cardboard to the target arm? Do away with the wing nut clamping system. good vieo though.
That is a bitchen target you made.
makes me dizzy
the movement of the target is too big, no any bad guy will expose himself like that.
nice