Servicing the Akai AA-1175

Поделиться
HTML-код
  • Опубликовано: 6 сен 2024
  • The Buyer heard some cracking noise in some knobs

Комментарии • 41

  • @dirtlump
    @dirtlump 4 месяца назад +1

    I still absolutely LOVE my AKAI AA1050 Receiver or my AM2800 Amp through JBL 4312A's...... even by todays powered speaker system standards..... the quality of clean/crisp retort my vintage AKAI 1050 delivers is in my opinion..... outstanding !

  • @VintageStereoCollector
    @VintageStereoCollector 9 месяцев назад +1

    Beautiful AKAI Huge Receiver very nice Looking

  • @ronalddejong9760
    @ronalddejong9760 3 года назад +10

    I know professional repairmen who say NEVER to use this kind of spray. It works for a while, but it can actually damage your device.

    • @aproapelafeldeb
      @aproapelafeldeb 3 года назад +5

      If you use it wisely and the spray is good quality it does not damage. Of course u can dismantle the pots and switches and clean them but being vintage, in the future you will still have to clean them with spray from time to time.

  • @hifi.david.
    @hifi.david. 3 года назад +6

    Not really servicing is it, I have actually serviced mine with new power capacitors and such.

  • @thomasmoore5346
    @thomasmoore5346 3 года назад +1

    When you have over 20+ receivers it’s a lot of work my friend, just wanted to say I love your videos, great gear and love the accent. Thomas from Colorado USA

  • @olivere.3166
    @olivere.3166 3 года назад +2

    Well built and beautiful. As been sayed before, be really careful with contact cleaner.
    This spray can be agressive and even destroy metal contacts and plastic parts.
    There are several products on the market that are not this agressive but of course also not as powerful.
    Best thing but cause a bit more work, to uninstall the switches and clean them directly with leather pads.
    Contact points of the relay: open the relay and put a piece of a strong paper, wetted with contact cleaner, between the contact points and start the receiver/amp. The relay contact will close, now pull put out the paper
    slowely and the contact points are clean.
    This will work as long as the contact points are not worn out.
    For full service check also caps, bias and so on et voilà

  • @MultiRay67
    @MultiRay67 3 года назад +4

    Hoi Andrew,als ik zo een mooie versterker in mijn bezit zou hebben,dan had ik hem naar een naar een goed servicecentre gebracht,het kost geld,maar is het zeker waard,een beetje lukraak met contactspray in de ronde gaan helpt meestal maar tijdelijk,en kan zelfs schade aanbrengen,ik spreek uit ervaring.Groetjes,en succes met je kanaal.

  • @redstarwraith
    @redstarwraith 3 года назад +3

    I have the Akai AA-1200. 120 Watts per channel. It is quite the beast.

  • @wielentschoten575
    @wielentschoten575 3 года назад +2

    Very good build quality! Like it

  • @shanechandler5672
    @shanechandler5672 3 года назад +1

    Love my Akai AA 1175 I used Deoxit on all the switches when I got it and it works beautifully

  • @randyreinninger6826
    @randyreinninger6826 3 года назад +5

    Beautiful unit , they don't make equipment like they used to

  • @cosmoshfa88savant66
    @cosmoshfa88savant66 3 года назад +1

    anyone who likes watching repairs,,,Mr Carlson's Lab
    is an absolute must,,,,

    • @vintagestereo
      @vintagestereo  3 года назад +1

      I follow MrCarlson's lab, not to learn from it, because I am not and will never become a handy guy but because I love his video's.

    • @cosmoshfa88savant66
      @cosmoshfa88savant66 3 года назад

      @@vintagestereo his vids are very addictive,,,hope you are keeping well Sir,,have a nice xmas,,,73s :-)

    • @cosmoshfa88savant66
      @cosmoshfa88savant66 3 года назад

      @@vintagestereo i used to live in Hillegom then lisse back in the early 90s,,,Bulb industry,,also even Den Helder for a few months,,,,,

  • @bigone137
    @bigone137 3 года назад +1

    nice looking receive Awesome video Good information

  • @aproapelafeldeb
    @aproapelafeldeb 3 года назад +8

    Hi Andrew, It actually matters where you spray and how much you spray. In my opinion u sprayed to much and also you got the liquid all over the board. Friendly advise, put some napkin around the pots next time, in order to absorb the excess.

    • @MikE-jp2jr
      @MikE-jp2jr 3 года назад +1

      I tend to spray lil to much it never hurt anything. I had some go in the display thought I messed it up, Dried next day. Mind you most I work on are in such shambles that most won't touch, probably why I spray lil to much.

    • @randyreinninger6826
      @randyreinninger6826 3 года назад +1

      It's not going to hurt anything. It's a cleaner and evaporates within seconds

    • @MikE-jp2jr
      @MikE-jp2jr 3 года назад +1

      @@randyreinninger6826 Yeah for a bit I was worried 🤬 I was bringing back Macintosh MA 12000. It was my dad's but he passed away.

  • @flrn6233
    @flrn6233 3 года назад +1

    I'm gonna give you a tip because, you can use contact cleaner but the process can cause damage. If you want the thing to work for another 20 years, use the oil called Ballistol Neo-Ballistol. Does not damage anything, made with natural products, just buy a syringe and spray a little of the oil, and just wait. Ask to your friend about this, maybe he knows.

    • @vintagestereo
      @vintagestereo  3 года назад

      thanks for the tip

    • @flrn6233
      @flrn6233 3 года назад

      @@vintagestereo I leave you this video, so you can see people use this: ruclips.net/video/rP7G1y6ruQs/видео.html

  • @68wrko
    @68wrko 3 года назад +2

    Be careful not to use window cleaner on the faceplate as I understand the lettering may come off. These receivers are great sounding units, a lot like Yamaha.

  • @edwinsnoek2009
    @edwinsnoek2009 3 года назад +1

    Als je de versterker toch open heb liggen, kijk dan ook even naar de bias instelling met de voltmeter of deze niet teveel verkopen is. Als de ruststroom teveel verlopen is na al die jaren heeft dat vaak een hele negatieve invloed op het geluid. Het is heel belangrijk dat je dat even na meet. En voor de rest even de stof met perslucht eruit sprayen, want stof is ook inductief. Dat was het dan wel zo'n beetje.😇

    • @vintagestereo
      @vintagestereo  3 года назад +1

      Sorry maar bias instellingen gaat mij te ver, helaas heb ik niet die kennis

  • @AudioElectronicsChicago
    @AudioElectronicsChicago 3 года назад +1

    a good one 👍🏻

  • @guidoreina1
    @guidoreina1 3 года назад +2

    that Akai got manhandled !!!

  • @kharlacartalla7113
    @kharlacartalla7113 2 года назад

    Do you buy akai receiver..? My husband has an akai model AA - 1582.. he wants to sell it.

  • @cosmoshfa88savant66
    @cosmoshfa88savant66 3 года назад +1

    Condition looks like new,,,,,

  • @MiTereKun
    @MiTereKun Год назад

    akai-AAA-45 круче

  • @thedude1249
    @thedude1249 3 года назад +7

    You really fart around with the equipment, never listen to good music. 🧐

  • @coenheydenrych154
    @coenheydenrych154 3 года назад +1

    This can't be called a "service". If you had the service manual (check on hifiengine) and followed that, it may have been a service.

  • @maxcasci7432
    @maxcasci7432 3 года назад

    Hi, do you also sell electronics? on ebay? if yes send me the link please? thank you

  • @dre63butch54
    @dre63butch54 3 года назад +1

    Ali baba's treasure room