Swing open doors are getting way old.Overhead door design is far superior,and thats the design change YANMAR should incorporate.I do like what yanmar is doing,keep up the good work.
hey brother! I agree the rollups are nice. Yanmar did make this door very light and very easy to remove, if you are in need of access to hop out. (I find it is more necessary if you are the only person on-site) Because we normally have 2-3 guys on-site, the clean and pressurized cab is much nicer than the roll-ups. The door allows for quiet and better climate control (gets really cold in our area). Our experience with the roll-up doors, is they lose their ability to pressurize after around 500-1000 hours.Just my two cents...I'm sure you probably already knew that, but just wanted to share my thought process. Thanks for watching and commenting!! Really helps the channel.
Just stopped by the dealership to see if they've gotten any in yet. Sounds like it might be another month or 2. They're supposed to be cranking out 14 a day and are only able to make 6 right now. Salesman told me lows 80s on fully loaded machine. Not sure how accurate that is but im pretty excited! Southwest PA
Low 80's would be on the smaller model, most likely. But, I would always advise buying the extended warranty on anything!! That should put it around 100K with a 4 year 4,000hr warranty!! Great Value for a solid machine.
What are ya talking about when you say you blew out airbags cause you didn't release the air. I've driven tri - axles for over 30 years and nobody and I mean nobody has ever blown a bag when being loaded ! And nobody ever dumps the air in the area I drive in. And that's in northeast Pa. Just curious...
My little tandem was being loaded by a CAT 983. He put 17 tons in and dropped it from above the bed walls. My assumption is, it was just too much to handle. Both rear bags blew at that moment. I'd be happy to consider another explanation.
@@diggindeeperPCG I did see the 2 previous posts. I'm very interested in the new Yanmar. I've been a past ASV owner & liked it. Recently took delivery of a Case Minotaur and my 1st new Bobcat. Looking for 1 more CTL. Looking forward to seeing how the new Yanmar shakes out.
Man! U are making me want one of these! The only thing is the previous Yanmar track Loaders were absolutely JUNK! But the videos U are making now, showing us something different!
Pull ahead more and slide the bottom of the bucket on the tail tilt down and your tracks will come up. You can walk a wheeled machine with 2 front flat tires this way
![Tee Grizzley - Blow for Blow (feat. J. Cole) [Official Video]](http://i.ytimg.com/vi/wNLN5xsx5dc/mqdefault.jpg)
Swing open doors are getting way old.Overhead door design is far superior,and thats the design change YANMAR should incorporate.I do like what yanmar is doing,keep up the good work.
hey brother! I agree the rollups are nice. Yanmar did make this door very light and very easy to remove, if you are in need of access to hop out. (I find it is more necessary if you are the only person on-site) Because we normally have 2-3 guys on-site, the clean and pressurized cab is much nicer than the roll-ups. The door allows for quiet and better climate control (gets really cold in our area). Our experience with the roll-up doors, is they lose their ability to pressurize after around 500-1000 hours.Just my two cents...I'm sure you probably already knew that, but just wanted to share my thought process. Thanks for watching and commenting!! Really helps the channel.
Sweet looking skid I know yanmar makes quality Im gonna keep my eye on yours for a while see how it compares to cat and bobcat
We like it and will keep you updated.
Just stopped by the dealership to see if they've gotten any in yet. Sounds like it might be another month or 2. They're supposed to be cranking out 14 a day and are only able to make 6 right now. Salesman told me lows 80s on fully loaded machine. Not sure how accurate that is but im pretty excited! Southwest PA
Low 80's would be on the smaller model, most likely. But, I would always advise buying the extended warranty on anything!! That should put it around 100K with a 4 year 4,000hr warranty!! Great Value for a solid machine.
What are ya talking about when you say you blew out airbags cause you didn't release the air. I've driven tri - axles for over 30 years and nobody and I mean nobody has ever blown a bag when being loaded ! And nobody ever dumps the air in the area I drive in. And that's in northeast Pa. Just curious...
My little tandem was being loaded by a CAT 983. He put 17 tons in and dropped it from above the bed walls. My assumption is, it was just too much to handle. Both rear bags blew at that moment. I'd be happy to consider another explanation.
Haha a pair 100s. Purchase both.
Don't tempt me!!
Let’s see that thing worked hard! I mean dog it!!!!!
We will!!
Looking forward to seeing an in-depth assessment of this machine.👍👍👍👍
Did you see the first video on this machine? We also have a lot more content of this machine working...on the way very soon!
ruclips.net/video/1HU2vivKpkY/видео.htmlsi=oOvV7GtX4bOBgjk3
@@diggindeeperPCG I did see the 2 previous posts. I'm very interested in the new Yanmar. I've been a past ASV owner & liked it. Recently took delivery of a Case Minotaur and my 1st new Bobcat. Looking for 1 more CTL. Looking forward to seeing how the new Yanmar shakes out.
@@stevenandrews6627 I will continue dropping content on this machine as well as more feedback.
Never even got the bucket in the dirt...
Making that content now!
Man! U are making me want one of these! The only thing is the previous Yanmar track Loaders were absolutely JUNK! But the videos U are making now, showing us something different!
Older yanmar track loaders where built by gehl/manitou.
Loving it so far!! More content coming on this machine.
Heck Ya
Heck Ya!!!
Great Video!
Hey Phil, sweet looking ride you got there. NICE! 😀
Thank you Sam!! I see you've been kitty CAT shopping as well!!
Such an awesome looking machine.
It really is impressive to look at!
Is this the same as a ts100 from alibaba?
I highly doubt it.
Pull ahead more and slide the bottom of the bucket on the tail tilt down and your tracks will come up. You can walk a wheeled machine with 2 front flat tires this way
Thank you Jordan! And Thanks for watching and commenting!
Wow, Yanmar….looks amazing!
We like it more each day! It is a beast and very comfortable. Thanks for watching and commenting
Yesssss!!!!!!!!!!
We have used it about 15 hours so far. The power is incredible!!
Show essa máquina!!!
More working videos on the way
@@diggindeeperPCG
Ok
Me chamo, Maurício
Sou do Brasil, e sou louco por essas máquinas.
Vejo bastante vídeos sobre elas.