Looks like everything is coming together very well. Running the chimney this way I think is a lot better. Love the Xmas lights hahaha! Stay safe my friend
Howdee JAY, merry christmas to you all. Awesome channel you have here, we push a button and heat comes on oil heating, good old fashion way. LOL im from northern ireland on the east coast. Just of carlinford bay. Enjoying your vid'S.
If that is a Jøtul stove, it's probably designed for both rear and top ventilation. Looks almost identical too the one I have at my small cabin here in Norway
You are on the right path Jay! Looks like you were playing Russian roulette with the chain saws with your "friends". 🤣🤣🤣 Wear your chaps next time.😠lololo Or you are juggling running chain saws????
No gasket needed , and what your planning on doing just go straight up then out , put a t with a clean out and go up your 3 feet , you can do it all with single wall pipe and where u go through shed use hardie backer board make two one for inside one for outside and won’t cost u much at all , 👍🏻
Hey Brother! I got two cement boards today and some bricks for the hearth. I think ill build a hearth in the corner. Im talking to a few people with different chimenys (market place and craigslist) Brand new material right out the roof was $750.... So im trying to sort some second hand material to save money lol.
With the stove in operation, air will be drawn into the collar joint and out the flue. As a result, an absolutely tight joint is probably not essential, and it appears that there was no gasket when the collar was installed on the back of the stove, so you probably don't need a gasket. You might want to install the stove parallel to the back wall of the shop to get better clearance between the single-wall pipe and the wooden shelf on the side wall.
Hey Tom! All the shelves and saws within proximity will be moved I just havent done that step yet! Just trying to layout the stove and determine which chimey direction were going. Once we are situated on the chimney well move the bench and saws!
I would extend up 3-4 feet before your 90 into the thimble, then install a tee with a clean-out bottom then extend up until you are 3 ft above the highest peak or obstacle within 10 feet of the chimney cap! P.s. time to sand and re finish your walls! Looks like exploding marvel mystery oil!😂😅😂😅
Haha hey pat it was actually exploding high heat engine enamel I used for the axe heads and post hole digger lol I was doing something and I pierced the can and it exploded lol
@@HomesteadJay once you get that stove fired up… I want to see how long you last inside the shed with a raging fire going! I am thinking about 20 -30 minutes 😅😂😅😂
Stove is looking great. I been thinking about a barrel stove in my 3 car garage to warm it up when I am out there. I know they are not the best things to have
Hey Larry. I’ve seen some wild double barrel stoves with heat exchanges and all kinds of stuff. They can crank out some heat for sure! Keep us updated if you do! Would love to follow that
Hey Shawn, single wall shows 18" from the back corner which is roughly where we are at now so well see! Double wall is more money but well see! Im trying to source chimeny parts now. Debating either through the wall or through the roof!
@@HomesteadJay I literally need to drive a 130km to get to a dealer who got the part, his shop isn’t online and he won’t post the part so I’ll have to drive there
The roof will be cheaper but more work. If I go out the back I loose my outdoor workbench, depending how I go out the wall. So im trying to sort out what I want to do lol
Its actually quite annoying lol your not the first to ask haha. We are about 60 miles from the ocean and problem is any storm from out west always turns to rain most likely here. IF we get a storm from the ocean or up from the south we get slammed LOL it snowed 1 inch last night but will most likely melt haha
@@HomesteadJay we’re supposed to get 4-8” tomorrow into Wednesday. Up until now we’ve only had about 6” in east central Minnesota. Was that a bobcat on the trailcam video?
@@gregj2647 O yes! it was back again! We have a potential bear too! I relocated my camera to an area in question where the neighbor and I think there is one roaming!
@@HomesteadJay we had a bear hanging around here for awhile and it tore the bird feeder down a couple of times. Haven’t seen it in a long time. A cougar was spotted about a month ago. Love living out in the country after 60 years in city life.
Good evening Sir, Very nice wood stove for sure and have a nice one Cheers 👌😇👍🍻
Thanks Dave! Cheers!
That’s going to be a nice shop stove!
Oh yes! Hopefully many projects to be done in here next to a wood stove!
Looks like everything is coming together very well. Running the chimney this way I think is a lot better. Love the Xmas lights hahaha! Stay safe my friend
That's the plan! Thanks Tim!
Good to see you making some spots to burn that wood Jay! Looks like an awesome buck on your trailcam too!
Slainte,
DC
Oh yes! Lots of wildlife for sure!
Howdee JAY, merry christmas to you all. Awesome channel you have here, we push a button and heat comes on oil heating, good old fashion way. LOL im from northern ireland on the east coast. Just of carlinford bay. Enjoying your vid'S.
Hey Victor! Hello from across the world! Thats so cool to have a subscriber from ireland! Cheers!
If that is a Jøtul stove, it's probably designed for both rear and top ventilation. Looks almost identical too the one I have at my small cabin here in Norway
Hey Stig! Yes it is both! I converted to top vent now so that buys us some good clearances! Stay tuned for more!
You are on the right path Jay!
Looks like you were playing Russian roulette with the chain saws with your "friends". 🤣🤣🤣
Wear your chaps next time.😠lololo
Or you are juggling running chain saws????
If I could juggle... I still wouldnt try with chainsaws LOL thanks for tuning in Jimbo!
No gasket needed , and what your planning on doing just go straight up then out , put a t with a clean out and go up your 3 feet , you can do it all with single wall pipe and where u go through shed use hardie backer board make two one for inside one for outside and won’t cost u much at all , 👍🏻
Hey Brother! I got two cement boards today and some bricks for the hearth. I think ill build a hearth in the corner. Im talking to a few people with different chimenys (market place and craigslist) Brand new material right out the roof was $750.... So im trying to sort some second hand material to save money lol.
With the stove in operation, air will be drawn into the collar joint and out the flue. As a result, an absolutely tight joint is probably not essential, and it appears that there was no gasket when the collar was installed on the back of the stove, so you probably don't need a gasket.
You might want to install the stove parallel to the back wall of the shop to get better clearance between the single-wall pipe and the wooden shelf on the side wall.
Hey Tom! All the shelves and saws within proximity will be moved I just havent done that step yet! Just trying to layout the stove and determine which chimey direction were going. Once we are situated on the chimney well move the bench and saws!
I would extend up 3-4 feet before your 90 into the thimble, then install a tee with a clean-out bottom then extend up until you are 3 ft above the highest peak or obstacle within 10 feet of the chimney cap!
P.s. time to sand and re finish your walls! Looks like exploding marvel mystery oil!😂😅😂😅
Haha hey pat it was actually exploding high heat engine enamel I used for the axe heads and post hole digger lol I was doing something and I pierced the can and it exploded lol
@@HomesteadJay once you get that stove fired up… I want to see how long you last inside the shed with a raging fire going! I am thinking about 20 -30 minutes 😅😂😅😂
Stove is looking great. I been thinking about a barrel stove in my 3 car garage to warm it up when I am out there. I know they are not the best things to have
Hey Larry. I’ve seen some wild double barrel stoves with heat exchanges and all kinds of stuff. They can crank out some heat for sure! Keep us updated if you do! Would love to follow that
Nice score with the stove ! Looks like they filmed the Texas chainsaw massacre in the shed . bloodbath .
Hahaha long story I pierced the red spray paint can I use for my axe heads and it flew all over the shed hahah I was BS
Hey Jay! If you use a double wall black pipe and go straight up it should cut your clearance in half maybe look into that, it worked for me
Hey Shawn, single wall shows 18" from the back corner which is roughly where we are at now so well see! Double wall is more money but well see! Im trying to source chimeny parts now. Debating either through the wall or through the roof!
i wouldve gotten a morso squirrel stove as it heats so well and new parts arent expensive :)
I got this for free so cant complain! LOL
@@HomesteadJay well ok then, but I hate Jøtul as they won’t sell me parts for my scan-stoves fireplace insert 😡
Ugh im sorry! Wish they could sell to you!
@@HomesteadJay I literally need to drive a 130km to get to a dealer who got the part, his shop isn’t online and he won’t post the part so I’ll have to drive there
@@DanishSpeakerChannel oh yikes! I do take for granted now having a close stove shoppe indeed! Hope you have goodluck my friend!
i didnt screw around with my roof so i went through the wall instead also
The roof will be cheaper but more work. If I go out the back I loose my outdoor workbench, depending how I go out the wall. So im trying to sort out what I want to do lol
Was that a bobcat on the trailcam? Can’t believe you don’t have any snow
Its actually quite annoying lol your not the first to ask haha. We are about 60 miles from the ocean and problem is any storm from out west always turns to rain most likely here. IF we get a storm from the ocean or up from the south we get slammed LOL it snowed 1 inch last night but will most likely melt haha
@@HomesteadJay we’re supposed to get 4-8” tomorrow into Wednesday. Up until now we’ve only had about 6” in east central Minnesota. Was that a bobcat on the trailcam video?
@@gregj2647 O yes! it was back again! We have a potential bear too! I relocated my camera to an area in question where the neighbor and I think there is one roaming!
@@HomesteadJay we had a bear hanging around here for awhile and it tore the bird feeder down a couple of times. Haven’t seen it in a long time. A cougar was spotted about a month ago. Love living out in the country after 60 years in city life.
@@gregj2647 Im blessed to say I have 0 years i the city life! Ill post more trail cam stuff at the end of each video people seem to like that!
Forgot to ask what happened to the pictures of everyone’s basement set ups
I have them all just havent put together yet lol