I’ll let you know one of my tricks Jason. In refractors and Cassegrains( Schmidt and Maksutov etc) normally the 2x Barlow is inserted in between the diagonal and eyepiece. If you place the Barlow BEFORE the diagonal and eyepiece it becomes a 2.75x Barlow 👍
@@troliskimosko the power of a Barlow lens increases with the distance of the eyepiece from the barlow. That means the further your eyepiece is away from the barlow, the higher your barlow's power is. There are some Barlows that are "Telecentric", meaning that this effect is mitigated and it barely changes the power, regardless of the distance. Examples are Powermates and Siebert telecentrics. But yes, this effect can be abused to get a 3x barlow out of a 2x barlow, basically.
New Astrophotographer here. That barlow lens is certainly much more dynamic than it first appears. I was using it all wrong, thus far. Thank you for sharing.
Hi Jason, I got my first telescope for Christmas (it’s just a basic StarSense DX102AZ) and your channel has been so invaluable, particularly for upgrading accessories. Got a Celestron 2x Barlow after watching this. Best astronomy channel on RUclips! Cheers, Paul
10:07 pm May 15/23 Wish I'd found your videos years ago. You are BRILLIANT and you really know the importance of not assuming anything; plus, not using fancy jargon or abbreviations. MEGA THANKS!!!
Thank You so much for all the videos on how to use all these things. I’m a real newbie to this and everything you have shown is making using my telescope way more fun.
Jason, brilliant. Although I am 66 years young I have gathered so much Barlow information from you. I love your site and watch it very frequently…sometimes the same video more than once. I have a Celestron reflector 130 EQ ( in a box because it’s not user friendly for me)however I love my Sky-Watcher 3.5 inch refractor on an AZ mount…… it’s brilliant. It just goes to show the best telescope is the one you will use ! Keep your site going. Happy Days. As always kind regards Ken ( Rutland).
Ken I have both types of mounts, and I urge you to plunge in and get familiar with the Equatorial. Once you get comfy with it, it will make observing so much sweeter!
I gave my son a 100mm F4 tabletop reflector I fixed with a plastic focuser I modified so the eyepiece holder tube wouldn't wiggle when you tried to focus it. Just drilled and tapped 2 holes with plastic screws to hold the tube steady instead of its wobble. I taped a solar filter sheet to cover the 2.8" hole in the dust cover so he could check out sunspots if he wanted to. I set him up with a 20mm Plossl, a 10mm Plossl and a 6mm 60° fov, then instructed him about the Barlow's use . I told him to use the 20mm for the Sun as it was 20x which with the smaller hole in the dust cap it would be easier to see half the Sun and with the Barlow lens screwed on he'd have approx. 30x. No point to using the 2x as the 10mm was already 40x I told him that with such a short focal length going higher than 133 would be difficult to get clear views, but tracking a star cluster at 133x with a tabletop is difficult enough. Other than the plastic focuser being wonkie, but fixable it wasn't a bad little scope for $120 at the time. Something I read about the Barlow lens screwed into eyepieces was that the power could be a bit variable depending on its distance from the EP's lens. It isn't much 1.5 to 1.3 and it didn't seem a big variance.
Thank you for all the tips and advises. I got my first telescope just a week ago and I am still learning to use it effectively. I find your channel is a great help. Many thanks!
Awesome video, and so informative! You just saved me from wasting money on a 3x Barlow flash deal on Amazon for my son's first telescope! Now I know the right thing to get him. Thanks so much. Keep up the great videos
I've been watching your videos almost daily since I purchased my Astromaster 90EQ. I've learned so much from you and I really appreciate it. We had our first clear night last night and I got it pointed at Polaris and took a quick look at Venus. There was a black vertical bar going through Venus but I think I probably didn't have it focused correctly. I'll work on that next time! Correction! I was watching your videos even before my purchase. You helped me decide what to buy within my budget. Thanks again.
Hello Marcin, thank you my friend.. It's more a question of "are they useful." they are great for giving you that extra kick of magnification for say, the planets especially if you've got a short focal length telescope or a limited amount of eyepieces. Just a handy tool to have at hand. 😃
Observe & Absorb Me thinks im going to have to do a lot of both being newbie. Celestron 130eq refractor purchased but both locking and adjuster screws were removed...so...i need to learn to collimate it. I have purchased one also. Think I'm going to enjoy this hobby
Hi Jason you mention the Swiss army knife and I must say it'd essential item I use when camping and it's sheer quality is outstanding! Barlow lens is that quality of the Swiss army knife and these lenses are great to have especially the good ones. I have a skywatcher one and it's so useful for refractors and reflectors. Love the tip you gave with your telescope and it shows these lenses have many uses! In out doors the Swiss army knife is simply the best item for it's many uses like tin opener etc. Barlow lens and Swiss army knife are for the out doors and everybody should own them in astronomy and camping. Both items are essential really as they are lightweight Compact and easy to use. Another great video my friend and stay safe plus clear skies too!
Jason - I found this article on Barlows from Orion Telescopes & Binoculars that states that placing a Barlow lens between the focuser and the diagonal, instead of the diagonal and eye piece increases the Barlow's magnification power by another 50%; IOW: a 2x Barlow can be a 3X Barlow based on where you place it. The article reads: "a barlow lens can be placed before the diagonal, that is, between the telescope and the diagonal (Figure C). In this case the barlow’s magnification factor is increased by about 50%. So a 2x barlow placed between the telescope and the diagonal provides about a 3x magnification boost."
Just found your video and thank you. As an eye glass wearer, I have had enough of trying to take my glasses off and using the binoculars. I believe that I also need to get a better pair of binoculars as the eye strain is still there and probably the distance you describe is part of the problem with the eye cup. Thank you!!
I’m just getting started in hobby and I have learn a ton from your videos. I even properly balanced my telescope; I didn’t even know that had to be done until I watched your videos. So thank you so much! Also, any recommendation on a star tracker app or if I should even use one?
This is the explanation wanted, great work. I myself are a visual watcher, but astrophotography is on my list. For now I ordered the Celestron 2x barlow, with some decent eyepieces for my Bresser 127mm/1200 achromat and my just ordered 102/500 Skywatcher travel achromat, lots of fun this summer in Italy I hope :) Thnx for you video I subscribed, greetings from the Netherlands.
Also called a T-Ring or M42 Lens Mount (that Svbony Barlow, standard 42 mm X 0.75 mm thread pitch), and available in M48, and M54 Lens Mount sizes. Keep spreading the good word!
im new here and gotten back into my two telescopes one i just got other ive had for a good 25 years but have all upgraded my eyepieces >>> i say that to say, NICE Job on your channel. Happy to be here. Have one myself. Very informartive and help me get back into it nicely. Thank you and keep up the good work.
Thanks for the video! This will help me pace myself and focus on learning before spending! That said, do you think it is possible to reach prime focus using a focal reduction lenses? DSLR camera sensor is still too far from secondary mirror and was wondering if a focus reducer lenses could help reduce that distance. Thanks!
I have been pulling my hair out wondering how it works were it goes 🤔 great video and I have the feeling I will be watching a lot lot more of you, thank you for your time in making these videos for newbies like my self.
Bought the Teleview 2X barlow and use it with a SvBony 305 color camera and Baader semi apo filter and my Celestron 120 mm Onmi Xlt 1000f/l on my Meade XL70 mount with motors.
Learning a lot from your videos! So as a beginner i have settled down on explore scientific 102/600 25mm 10mm plus one 2x Barlow with the twilight az nano Mount...not going for reflectors or mak though am very tempted.... thoughts on this? Should I proceed with it?
I have Celestron Revalation 2x Barlow, which for the price is pretty forgiving. Great Overview of Barlow lenses and thanks for the tips! Clear Skies 👍✨
Thank you Avanteesh. Your more than welcome. I've not tried the Celestron Revalation but only heard positive things said about them. Take care, clear skies friend :)
So these can be used as a focal reducer for regular camera lenses. Say, adapting old medium format lenses to a 35mm full frame format mirrorless camera to reduce the image circle size?
im new to you but i really enjoy learning and your videos have been really helpful, I just aquired a solomark f70070eq it came with a 10mm plossl and a 20mm plossl i dont like the finder on it as i have to look down the sight... id like to get an angle finder,,,could you make a recommendation on specific parts to upgrade this particular telescope as in lenses and a angle finder you like it would really help narrow down the field if you could recommend a few pieces....thanks
I have the cheap barlow that came with my cheap original celestron scope , probably a single element It's something I have to improve on , even for my astrophotography , a quality barlow can make a bit of difference ,
Hello Tom. More than likely yes, it will be a single element lens system which means a lot of false colour... For astrophotography it is essential to have a barlow with at least 2 elements. You don't have to spend a fortune, £30-40 will get you a good barlow.
Thank you pulkin, Always a good idea to spend that little bit extra, you won't regret it.. Anyway, good quality views at the eyepiece are priceless. :)
Hi, I'm a beginner and you thankfully make it easier to understand eyepieces, i have a Celestron Astro FI 130MM with no eyepieces. I'm looking at buying a 13-15mm, 23mm-25mm (i think) and a Barlow with a £250 budget, what would you recommend? Thanks Phil
Can you do a video about trouble shooting a Barlow lens that won't focus? Especially 2 inch. I'm wanting to upgrade for my 10inch dobsonian and I know the 2inch can sometimes be troublesome and you might need a extension.
A lot of good information here . I thought the Barlow divided the lens mm,s and changed the power , you say it multiply,s the focal length of the telescope . I have been figuring the number the wrong way , tho I think it gives the same power figure maybe.
Barlow lenses don't correct the image, but an erecting prism will. Please note that erecting prisms come in different types depending on whether you have a Newtonian/Dobsonian telescope or a refractor/cassegrain.
Right on Jason, they increase a telescopes focal length foremost. I rock a Revelation 2.5x Barlow, had it years, but I am tempted by the TeleVue 3x for planetary Lunar imaging.
Hey Chris. Oh yes, anything TeleVue is going to be drool time :D.. I've never had the pleasure of owning any of there products... Never been able to afford them LOL. One day though.. One day..
If your favorite eyepiece happens to be a longer focal length plossl, panoptic or erfle type superwide, or any longer focal length long eye relief eyepiece that does not have a negative lens group in the barrel, a barlow will change the eye relief, making it longer, which in many cases will cause blackouts or make it impossible to see the whole field because the eye relief is pushed out so far. This is one of the reasons for the powermate or other 4 element telecentric barlows, they dont alter the eye relief.
Great video. Can you use a barlow when doing astrophotography? I have a Skywatcher ed80 telescope with field flattener and thinking of buying a RedCat51 for a portable setup. I use a Sony a7iii camera, can a barlow fit in with this setup?
Hello Paul. Thanks buddy. Yes, is the simple answer to that, I would go as far to say a Barlow is essential for astrophotography. And yes, you will be able to fit a barlow to your camera by using one of the methods in the video. Take care clear skies :)
Hi Jason, I recent acquire a 3x barlow and maybe you know approximately the amount of power that I can obtain using the way that you describe in the minute 6:00, thanks for your attention
Nice video, well presented. I have a 90mm Maksutov-Cassegrain Telescope with just the included 9.7mm and 26mm eyepieces, If I read you correctly, would a 2X Barlow be better for magnification & Image quality rather than a 3X? Now Subbed :)
I own a Celestron 130 SLT telescope. I just purchased a 2x barlow lens. Will that allow me to see Neptune and Uranus as small blueish blurs in the sky? Not having any luck with my current lens that came with the telescope. Thanks for any input!
Your welcome... There are many decent priced barlows out there 20/30 $/£ will get you a decent barlow lens... ..The Celestron 2x Omni is a great budget barlow..
Hi Jason, Does the Barlow lense narrow the field of view, by that I mean, do you need to be more accurate with the sight? I had a some trouble getting to see anything earlier when I used the Barlow lense that came with my scope.
Hello there. Yes. When using a barlow the F.O.V will decrease... A barlow increases the focal length of the telescope so you will also need to re-focus, (usually inwards) a little. Always start your observations with your lowest power eyepiece and gradually build up the power/magnification always keeping the target in the F.O.V. Do it this way and you should have more success. Hope this helps you out my friend..Good luck. :)
I have seen on sale 2X barlow lens that is mounted on the bottom of the eyepiece, the same way as a filter. It has a M28x0.6 thread. I intent to purchase it, since it is cheap. What is your comment on this ?
Hi Mr. Jason, I have a question regarding the Barlow as you mentioned in the video that never over power the telescope with x5 Barlow and 5 mm lens it only will results in bad blurring image.... my question how do I know my maximum telescope power that I wont exceed it (my Telescope is Celestron Astromaster 130 EQ). and thanks in advance
Diameter times 2, so in your case 130x2=260. That's your theoretical max, but that does require a wery stable mount, as small vibrations will also be magnified 🔎.
Heya, great video 👍. I'm new to astronomy and was wondering if I can fit any Barlow lens into any eyepiece - e.g. Celestron 9mm eyepiece + sbvony Barlow lens x2. Cheers
Hello qwertylol.. Simple answer, yes, as long as they are the same size / circumference. Eyepiece's and barlows come in two sizes, inch and a quarter and two inch, so as long as the size matches it does't matter if they are different makes they will still work with each other.. Hope that's cleared things up for you :)
My previous question on your video about eye pieces Why they are more expensive,after watching this,I noticed the first insert to double the focal lens Wasn't provided with the other lens they sell
So if I was to use an 18mm eyepiece with a 2x barlow it will basicly make it equivilent to an 9mm eyepiece, but is the view the same? Is it as clear as it would be just using an 9mm eyepiece or does adding the barlow to the 18mm reduce light transmitence and make the image darker than just using the 8mm eye piece with out the barlow? Hope I'm making sence here. Thanks. Great video's. keep them coming.
Hello Jim. Its ALWAYS better to use a eyepiece on its own rather than with a barlow for exactly what you say, when using a barlow you are adding More glass for light to pass through meaning a dimmer image. Barlows are useful for lower powered telescopes for instance were even a 9mm eyepiece is not giving enough power. Or astrophotography. A good quality high powered eyepiece used on its own will always give you a brighter crisper image than any eyepiece Barlow combo.
Picked up a cheapy 750mm. Then got a 5x barlow and the 4mm eyepiece (cheap version, budget mattered. It was $20 vs $130)...i should see ants on the moon if its not too bad 😆🤦 or ants on the lens if it is. Using a cell phone for the good sensor. But didnt have much luck with the clamp contraptions (plastic one is loose and wobbly, metal one doesnt fit the camera focus tube (fits the 1.25" perfectly and fairly solidly)... so...bought a rigid carbon fiber phone case and a 42mm male camera to microscope eyepiece adapter, and will epoxy that to the case (alignment gods willing). Should make for a nice rigid reliable camera mount, that lets me screw the camera focus tube to the cell phone.
The whole purpose of a T thread adapter is to connect to a camera body, without a lens, for focal plane imaging. No eyepiece is used. Telescope eyepieces don't use a T thread.
Usually, as with anything in life, you gain something at the cost of loosing something else... I was wondering, what are you loosing by using a barlow? is it exactly the same to use a 6mm eye piece with a 2x barlow, than using a 3mm eye piece? Thanks for this video!
In the end its all about quality of the barlow. Very good barlows like Televues will not add, (add less) or any, distortion to the image while cheap ones come with a lot of visual issues. Having a dedicated 3mm eyepiece is better than using a 6mm with a barlow because of the simple fact that you are introducing another layer of glass. The more glass you put in between your eye and the mirror the less light and the less sharp the image, on top of potentially adding more distortions, thats just how physics work, same as with camera lenses. Now at the same time that 3mm eyepiece will not be able to be barlowed (even a 6mm is probably going to result in a rather dark and blurry image) and so it actually has less versatility than using a 6mm + barlow. As adviced in the video spend the extra buck to get a really good 2x Barlow for visual Astronomy so that your eyepiece quality doesnt get dragged down by it.
I got my first rocky reflector telescope x 215. There's no vertical adjustment, I got bag filled with lenses but I don't know where to put them amd the whole tripod is almost flipping over by the weight from the metal brick in the bottom. 😢😮
hmmm... as I'm a beginner, I wonder if a higher X Barlow wouldn't be a bad thing when viewing a bright object, like the moon. Higher magnification for more surface detail, and perhaps reduce the need for a moon filter for the brightness in certain circumstances. ....just wondering.
I had just purchased a Gskyer explorer 130EQ - It came with 7 lenses. I now know the 3barlow, but the rest are all Greek to me. There aren't any labels or engravings to tell what each lens size is. Is there a way of measuring to identify these?
Hello Charles. Mmmm, that's odd.. There isn't a exact way of knowing but for a good clue to what power they are, lower powered eyepieces usually have larger diameter lenses the higher the power the smaller the diameter of the lens will be. Hope this helps.
I've got a Celestron 130az dx. I've bought a 5mm x-cel lx and a 2x barlow, same model line. They don't work together. It should give me 260x magnification. but it isn't working. Am I pushing my scope too far???
Hello there.. Yes you are really.. You will probably get away with that combo on the moon but with the planets and anything else your pushing your luck a little. For that amount of power/magnification with your telescope the seeing conditions would have to be perfect to get any thing like a decent view. You would be far better off just using the eyepiece on it's own.. I also have a 130 mm telescope and very rarely go above 150 x. Telescopes are like anything that has a max, if you go beyond it usually bad things happen.. Always start with low power and gradually increase the power. Remember, less is more :)
I've read that the SV105 camera has a field of view equivalent to looking through a 4mm eyepiece. My telescope has a 900mm focal length and an aperture / mirror size of 130mm (maximum recommended magnification of 260x). If I use a 4mm eyepiece that's a magnification of 225x so adding a 2x Barlow pushes the magnification past the maximum limit to 450x. As the camera field of view is similar to a 4mm eyepiece does the same limit apply? If I use a 2x / 3x / 5x Barlow will the camera get a blurry image?
I have the sv305. And use it with my 2 x Barlow with great results... and I’m even using a 1950s Lafayette refractor. 60mm 800mm. No blur. But focus is real touchy.
As I understand Barlow lenses, they're multiplying the focal length, your 900 becomes 1800, if it's a 2x and 2700 if 3x, and so on, therefore your max rises too.
A standing Ovation to you my friend and at last some one who knows how to teach and make it easy and a joy to at last let the not so talented catch up ,indeed a Standing Ovation ,Brian
Hi, I bought the Celestron Omni x2 barlow and unlike the eyepieces, it does not sit tight in the diagonal. It moves and wobbles which is quite annoying. Is that normal?
Hello dioni82. I've not noticed it to the extent you have, but one thing you can do is put a strip of insulating tape around the barrel to tighten things up a little to make it more of a snug fit. I have come across this problem from time to time and the tape method even though simple always seems does the trick.. Hope this helps :)
great video! so well explained for the novice to understand!!!!!!!!!!!! am just starting out in astronomy/ astrophotography and so much to learn!! Stupid question .... do all eyepieces fit all brands of telescope? or do I need to buy a particular Barlow lens for each brand?
Jason mentioned this in the video. He said it's the size of the slot either 1,25" diameter or 2" diameter. So, based on this, whatever size diameter slot your telescope takes, any brand will fit that size.
Hello friend. Like I say in the video as long as the barlow you want to buy is a brand name like SkyWatcher, Celestron, Svbony ect, you will be OK. Take care :)
Hello saucenotgravy1. To be honest I've never tried one with a Bird Jones. At first guess I would say probably not, because the lens in the focuser of a Bird Jones is a barlow itself, not only that, it's also a correctional lens for the spherical mirror. My advice is if at all possible borrow a barlow to try and see if it works.. Sorry I can't give you a straight answer but like I say I'm not that familiar with the Bird Jones design Take care :)
@@saucenotgravy1 It's Ok I guess. I got it cheap to use until I can get something better. I have it on a Skywatcher GTI mount so, I'm not using the EQ mount that came with it. I
I’ll let you know one of my tricks Jason. In refractors and Cassegrains( Schmidt and Maksutov etc) normally the 2x Barlow is inserted in between the diagonal and eyepiece. If you place the Barlow BEFORE the diagonal and eyepiece it becomes a 2.75x Barlow 👍
What?? How does that work 😮 I’m gonna try this my next planetary imaging session !
If you're using a filter at the diagonal side, I'm not sure where to place the filter if you place the Barlow before diagonal.
@@troliskimosko the power of a Barlow lens increases with the distance of the eyepiece from the barlow. That means the further your eyepiece is away from the barlow, the higher your barlow's power is.
There are some Barlows that are "Telecentric", meaning that this effect is mitigated and it barely changes the power, regardless of the distance. Examples are Powermates and Siebert telecentrics. But yes, this effect can be abused to get a 3x barlow out of a 2x barlow, basically.
New Astrophotographer here.
That barlow lens is certainly much more dynamic than it first appears. I was using it all wrong, thus far.
Thank you for sharing.
I really appreciate how you described what a Bar Len is. I have been looking through RUclips and no one explained it so detailed like you. Thank you!😊
Hi Jason, I got my first telescope for Christmas (it’s just a basic StarSense DX102AZ) and your channel has been so invaluable, particularly for upgrading accessories. Got a Celestron 2x Barlow after watching this. Best astronomy channel on RUclips! Cheers, Paul
10:07 pm May 15/23 Wish I'd found your videos years ago. You are BRILLIANT and you really know the importance of not assuming anything; plus, not using fancy jargon or abbreviations. MEGA THANKS!!!
You are by far the best in describing how and what to use and how to use it. Thank you.
Thank you for your kind words my friend.
@@smalloptics753 you are very welcome! Thank you for your help.
Only been viewing for 6 years, but I've never owned a Barlow~ had too many questions. You just answered 'em all- thanks!
Your more than friend.
This channel is pure gold! I'm lucky to have found it!
Appreciate it my friend.. Great to have you here 🙂
Thank You so much for all the videos on how to use all these things.
I’m a real newbie to this and everything you have shown is making using my telescope way more fun.
Your more than welcome Mike. :)
Agreed! This is a really helpful video, thanks!
Jason, brilliant. Although I am 66 years young I have gathered so much Barlow information from you. I love your site and watch it very frequently…sometimes the same video more than once.
I have a Celestron reflector 130 EQ ( in a box because it’s not user friendly for me)however I love my Sky-Watcher 3.5 inch refractor on an AZ mount…… it’s brilliant. It just goes to show the best telescope is the one you will use !
Keep your site going. Happy Days.
As always kind regards Ken ( Rutland).
Ken I have both types of mounts, and I urge you to plunge in and get familiar with the Equatorial. Once you get comfy with it, it will make observing so much sweeter!
@@DavidRice111 Thanks David. Kind regards Ken.
I gave my son a 100mm F4 tabletop reflector I fixed with a plastic focuser I modified so the eyepiece holder tube wouldn't wiggle when you tried to focus it. Just drilled and tapped 2 holes with plastic screws to hold the tube steady instead of its wobble. I taped a solar filter sheet to cover the 2.8" hole in the dust cover so he could check out sunspots if he wanted to. I set him up with a 20mm Plossl, a 10mm Plossl and a 6mm 60° fov, then instructed him about the Barlow's use . I told him to use the 20mm for the Sun as it was 20x which with the smaller hole in the dust cap it would be easier to see half the Sun and with the Barlow lens screwed on he'd have approx. 30x. No point to using the 2x as the 10mm was already 40x
I told him that with such a short focal length going higher than 133 would be difficult to get clear views, but tracking a star cluster at 133x with a tabletop is difficult enough. Other than the plastic focuser being wonkie, but fixable it wasn't a bad little scope for $120 at the time. Something I read about the Barlow lens screwed into eyepieces was that the power could be a bit variable depending on its distance from the EP's lens. It isn't much 1.5 to 1.3 and it didn't seem a big variance.
Thank you for all the tips and advises. I got my first telescope just a week ago and I am still learning to use it effectively. I find your channel is a great help. Many thanks!
Just brought a telescope and came with a Barlow and was a bit confused by its setup up. This cleared it up thank you very much sir
Awesome video, and so informative! You just saved me from wasting money on a 3x Barlow flash deal on Amazon for my son's first telescope! Now I know the right thing to get him. Thanks so much. Keep up the great videos
you are a great father, i had to research everything for months myself haha
I've been watching your videos almost daily since I purchased my Astromaster 90EQ. I've learned so much from you and I really appreciate it. We had our first clear night last night and I got it pointed at Polaris and took a quick look at Venus. There was a black vertical bar going through Venus but I think I probably didn't have it focused correctly. I'll work on that next time! Correction! I was watching your videos even before my purchase. You helped me decide what to buy within my budget. Thanks again.
"Do you actually need one" - I hope so because I bought one before openning this movie :). BTW. Great channel for newbies.
Hello Marcin, thank you my friend.. It's more a question of "are they useful." they are great for giving you that extra kick of magnification for say, the planets especially if you've got a short focal length telescope or a limited amount of eyepieces. Just a handy tool to have at hand. 😃
@@smalloptics753 yet another "I hope so" 🙂 it's x2 for my 8" Dobson. I'd like to see any planets with my standard eyepieces.
Damn, another cool British fellow that I’d like to be pals with. Cooler than me by a long shot and way more interesting to listen to.
Observe & Absorb
Me thinks im going to have to do a lot of both being newbie.
Celestron 130eq refractor purchased but both locking and adjuster screws were removed...so...i need to learn to collimate it.
I have purchased one also.
Think I'm going to enjoy this hobby
Hi Jason you mention the Swiss army knife and I must say it'd essential item I use when camping and it's sheer quality is outstanding! Barlow lens is that quality of the Swiss army knife and these lenses are great to have especially the good ones.
I have a skywatcher one and it's so useful for refractors and reflectors. Love the tip you gave with your telescope and it shows these lenses have many uses!
In out doors the Swiss army knife is simply the best item for it's many uses like tin opener etc. Barlow lens and Swiss army knife are for the out doors and everybody should own them in astronomy and camping. Both items are essential really as they are lightweight Compact and easy to use.
Another great video my friend and stay safe plus clear skies too!
Hey Bushcraft. Hope your well pal... Yeah, they are very useful tools, I've still got my original knife from the 80's and it's still going strong :D
Jason - I found this article on Barlows from Orion Telescopes & Binoculars that states that placing a Barlow lens between the focuser and the diagonal, instead of the diagonal and eye piece increases the Barlow's magnification power by another 50%; IOW: a 2x Barlow can be a 3X Barlow based on where you place it. The article reads: "a barlow lens can be placed before the diagonal, that is, between the telescope and the diagonal (Figure C). In this case
the barlow’s magnification factor is increased by about 50%. So a 2x barlow placed between the telescope and the diagonal provides about a 3x magnification boost."
Great video. All your video’s have been very helpful. Thank you
Just found your video and thank you. As an eye glass wearer, I have had enough of trying to take my glasses off and using the binoculars. I believe that I also need to get a better pair of binoculars as the eye strain is still there and probably the distance you describe is part of the problem with the eye cup. Thank you!!
I’m just getting started in hobby and I have learn a ton from your videos. I even properly balanced my telescope; I didn’t even know that had to be done until I watched your videos. So thank you so much!
Also, any recommendation on a star tracker app or if I should even use one?
I like SkyView app. It’s very accurate
Night Sky app is very detailed and will send you text messages of your favorite stars, meteor’s etc…
SkyView is simpler and accurate. Stellarium is good and is my 2nd, I primarily use SkySafari though.
(I have used all 3)
Clear skies, bro! You're the best!!!
You explained this perfectly thank you!
Thanks!
Your welcome 🙂
Best video I've seen on barlows. Thanks.
Thank you. Your more than welcome my friend thanks for watching.
Great vid. Thanks for sharing
Wonderful video. Clear skies! I don’t think I appreciate my Barlow enough, it just...works! Clear skies.
This is the explanation wanted, great work. I myself are a visual watcher, but astrophotography is on my list. For now I ordered the Celestron 2x barlow, with some decent eyepieces for my Bresser 127mm/1200 achromat and my just ordered 102/500 Skywatcher travel achromat, lots of fun this summer in Italy I hope :) Thnx for you video I subscribed, greetings from the Netherlands.
Thank you for your support my friend. Hope you enjoy your new Astro goodies 🙂
Also called a T-Ring or M42 Lens Mount (that Svbony Barlow, standard 42 mm X 0.75 mm thread pitch), and available in M48, and M54 Lens Mount sizes.
Keep spreading the good word!
im new here and gotten back into my two telescopes one i just got other ive had for a good 25 years but have all upgraded my eyepieces >>> i say that to say, NICE Job on your channel. Happy to be here. Have one myself. Very informartive and help me get back into it nicely. Thank you and keep up the good work.
Thank you for my friend , welcome back to the hobby 😃🔭
Very helpful video, right on point,
Thanks for the video! This will help me pace myself and focus on learning before spending!
That said, do you think it is possible to reach prime focus using a focal reduction lenses? DSLR camera sensor is still too far from secondary mirror and was wondering if a focus reducer lenses could help reduce that distance. Thanks!
Try out Celestron Focal reducers/correctors. A common one for astrophotography is a f6.3 reducer/corrector
I have been pulling my hair out wondering how it works were it goes 🤔 great video and I have the feeling I will be watching a lot lot more of you, thank you for your time in making these videos for newbies like my self.
Thank you. Your more than welcome Joe😊
Bought the Teleview 2X barlow and use it with a SvBony 305 color camera and Baader semi apo filter and my Celestron 120 mm Onmi Xlt 1000f/l on my Meade XL70 mount with motors.
Learning a lot from your videos! So as a beginner i have settled down on explore scientific 102/600 25mm 10mm plus one 2x Barlow with the twilight az nano Mount...not going for reflectors or mak though am very tempted.... thoughts on this? Should I proceed with it?
I have Celestron Revalation 2x Barlow, which for the price is pretty forgiving. Great Overview of Barlow lenses and thanks for the tips! Clear Skies 👍✨
Thank you Avanteesh. Your more than welcome. I've not tried the Celestron Revalation but only heard positive things said about them. Take care, clear skies friend :)
So these can be used as a focal reducer for regular camera lenses. Say, adapting old medium format lenses to a 35mm full frame format mirrorless camera to reduce the image circle size?
i am new to using a telescope and have found your videos very informative and easy to follow,thank you.
Damn that was insightful as hell cheers mate 👍
These Celestron Barlows are great!
Great video, clear skys
im new to you but i really enjoy learning and your videos have been really helpful, I just aquired a solomark f70070eq it came with a 10mm plossl and a 20mm plossl i dont like the finder on it as i have to look down the sight... id like to get an angle finder,,,could you make a recommendation on specific parts to upgrade this particular telescope as in lenses and a angle finder you like it would really help narrow down the field if you could recommend a few pieces....thanks
I have the cheap barlow that came with my cheap original celestron scope , probably a single element It's something I have to improve on , even for my astrophotography , a quality barlow can make a bit of difference ,
Hello Tom. More than likely yes, it will be a single element lens system which means a lot of false colour... For astrophotography it is essential to have a barlow with at least 2 elements. You don't have to spend a fortune, £30-40 will get you a good barlow.
Nice .. probably gonna spend my money on proper barlow lens next time
Thank you pulkin, Always a good idea to spend that little bit extra, you won't regret it.. Anyway, good quality views at the eyepiece are priceless. :)
Wow another great video, I'm learning so much thanks again Jason!!!
Your more than welcome Jason, great to hear :)
Hi, I'm a beginner and you thankfully make it easier to understand eyepieces, i have a Celestron Astro FI 130MM with no eyepieces. I'm looking at buying a 13-15mm, 23mm-25mm (i think) and a Barlow with a £250 budget, what would you recommend? Thanks Phil
I bought the Celestron X - Cel LX Barlow and I love it.
The X-Cel LX are great barlows...Good choice.
Can you do a video about trouble shooting a Barlow lens that won't focus?
Especially 2 inch.
I'm wanting to upgrade for my 10inch dobsonian and I know the 2inch can sometimes be troublesome and you might need a extension.
A lot of good information here .
I thought the Barlow divided the lens mm,s and changed the power , you say it multiply,s the focal length of the telescope .
I have been figuring the number the wrong way , tho I think it gives the same power figure maybe.
Great video!I needed some help with my barlows😁😊
Thank you and your more than welcome friend :)
will this also correct the image so it isn't flipped?
Barlow lenses don't correct the image, but an erecting prism will. Please note that erecting prisms come in different types depending on whether you have a Newtonian/Dobsonian telescope or a refractor/cassegrain.
Right on Jason, they increase a telescopes focal length foremost. I rock a Revelation 2.5x Barlow, had it years, but I am tempted by the TeleVue 3x for planetary Lunar imaging.
Hey Chris. Oh yes, anything TeleVue is going to be drool time :D.. I've never had the pleasure of owning any of there products... Never been able to afford them LOL. One day though.. One day..
One question. Can i screw the lens (just the lens piece) of a 2X Barlow at the bottom of another 2X Barlow and what would the effect be ?
If your favorite eyepiece happens to be a longer focal length plossl, panoptic or erfle type superwide, or any longer focal length long eye relief eyepiece that does not have a negative lens group in the barrel, a barlow will change the eye relief, making it longer, which in many cases will cause blackouts or make it impossible to see the whole field because the eye relief is pushed out so far.
This is one of the reasons for the powermate or other 4 element telecentric barlows, they dont alter the eye relief.
Great video. Can you use a barlow when doing astrophotography? I have a Skywatcher ed80 telescope with field flattener and thinking of buying a RedCat51 for a portable setup. I use a Sony a7iii camera, can a barlow fit in with this setup?
Hello Paul. Thanks buddy. Yes, is the simple answer to that, I would go as far to say a Barlow is essential for astrophotography. And yes, you will be able to fit a barlow to your camera by using one of the methods in the video. Take care clear skies :)
@@smalloptics753 brilliant, thank you
Do you recommend a 2" barlow for deep-sky astro in any way?
Thank you Jason!
Can we attach any barlow lens to any telescope? For example the BNISE F40070M
Hi Jason, I recent acquire a 3x barlow and maybe you know approximately the amount of power that I can obtain using the way that you describe in the minute 6:00, thanks for your attention
Nice video, well presented. I have a 90mm Maksutov-Cassegrain Telescope with just the included 9.7mm and 26mm eyepieces, If I read you correctly, would a 2X Barlow be better for magnification & Image quality rather than a 3X? Now Subbed :)
@michaelrussell2181 In a nutshell, yes, less is usually more when it comes to magnification.. Thank you for the sub, my friend.
I own a Celestron 130 SLT telescope. I just purchased a 2x barlow lens. Will that allow me to see Neptune and Uranus as small blueish blurs in the sky? Not having any luck with my current lens that came with the telescope. Thanks for any input!
Thanks for sharing! Brands? Models?
Your welcome... There are many decent priced barlows out there 20/30 $/£ will get you a decent barlow lens... ..The Celestron 2x Omni is a great budget barlow..
Great video!
Hi Jason,
Does the Barlow lense narrow the field of view, by that I mean, do you need to be more accurate with the sight? I had a some trouble getting to see anything earlier when I used the Barlow lense that came with my scope.
Hello there. Yes. When using a barlow the F.O.V will decrease... A barlow increases the focal length of the telescope so you will also need to re-focus, (usually inwards) a little. Always start your observations with your lowest power eyepiece and gradually build up the power/magnification always keeping the target in the F.O.V. Do it this way and you should have more success. Hope this helps you out my friend..Good luck. :)
@@smalloptics753 thank you, that is helpful.
I have seen on sale 2X barlow lens that is mounted on the bottom of the eyepiece, the same way as a filter. It has a M28x0.6 thread. I intent to purchase it, since it is cheap. What is your comment on this ?
Hi Mr. Jason, I have a question regarding the Barlow as you mentioned in the video that never over power the telescope with x5 Barlow and 5 mm lens it only will results in bad blurring image.... my question how do I know my maximum telescope power that I wont exceed it (my Telescope is Celestron Astromaster 130 EQ). and thanks in advance
Diameter times 2, so in your case 130x2=260. That's your theoretical max, but that does require a wery stable mount, as small vibrations will also be magnified 🔎.
Heya, great video 👍. I'm new to astronomy and was wondering if I can fit any Barlow lens into any eyepiece - e.g. Celestron 9mm eyepiece + sbvony Barlow lens x2. Cheers
Hello qwertylol.. Simple answer, yes, as long as they are the same size / circumference. Eyepiece's and barlows come in two sizes, inch and a quarter and two inch, so as long as the size matches it does't matter if they are different makes they will still work with each other.. Hope that's cleared things up for you :)
@@smalloptics753 thank you 🙏
Great thanks
If I have a 1.25 T adapter and insert it into a 2" barlow will i get a 2" view?
My previous question on your video about eye pieces
Why they are more expensive,after watching this,I noticed the first insert to double the focal lens
Wasn't provided with the other lens they sell
Yes it is a T and you also need to buy a T adapter for your pacific camera.to work. I just starting to take photos at this point. Thank you
So if I was to use an 18mm eyepiece with a 2x barlow it will basicly make it equivilent to an 9mm eyepiece, but is the view the same? Is it as clear as it would be just using an 9mm eyepiece or does adding the barlow to the 18mm reduce light transmitence and make the image darker than just using the 8mm eye piece with out the barlow? Hope I'm making sence here. Thanks. Great video's. keep them coming.
Hello Jim. Its ALWAYS better to use a eyepiece on its own rather than with a barlow for exactly what you say, when using a barlow you are adding More glass for light to pass through meaning a dimmer image. Barlows are useful for lower powered telescopes for instance were even a 9mm eyepiece is not giving enough power. Or astrophotography. A good quality high powered eyepiece used on its own will always give you a brighter crisper image than any eyepiece Barlow combo.
@@smalloptics753 Thanks!
They go before a diagonal correct?
Hello there. Yes, but you can also use them after diagnol, the disadvantage of doing it this way is it can make the eyepiece long and a bit clumsy.
So as a beginner with a tight budget…I should get the Orion ST80 bundle then. Got it lol
Picked up a cheapy 750mm. Then got a 5x barlow and the 4mm eyepiece (cheap version, budget mattered. It was $20 vs $130)...i should see ants on the moon if its not too bad 😆🤦 or ants on the lens if it is.
Using a cell phone for the good sensor. But didnt have much luck with the clamp contraptions (plastic one is loose and wobbly, metal one doesnt fit the camera focus tube (fits the 1.25" perfectly and fairly solidly)...
so...bought a rigid carbon fiber phone case and a 42mm male camera to microscope eyepiece adapter, and will epoxy that to the case (alignment gods willing). Should make for a nice rigid reliable camera mount, that lets me screw the camera focus tube to the cell phone.
Does the Barlow with the T thread also work with an eyepiece or can you only use it with a camera?
The whole purpose of a T thread adapter is to connect to a camera body, without a lens, for focal plane imaging. No eyepiece is used. Telescope eyepieces don't use a T thread.
When would I want two eyepieces (i.e. 20mm, 10mm) instead of one plus 10mm barlow?
Can you sugest me what is good barlow lens but that is under 70$
Usually, as with anything in life, you gain something at the cost of loosing something else... I was wondering, what are you loosing by using a barlow? is it exactly the same to use a 6mm eye piece with a 2x barlow, than using a 3mm eye piece?
Thanks for this video!
In the end its all about quality of the barlow. Very good barlows like Televues will not add, (add less) or any, distortion to the image while cheap ones come with a lot of visual issues. Having a dedicated 3mm eyepiece is better than using a 6mm with a barlow because of the simple fact that you are introducing another layer of glass. The more glass you put in between your eye and the mirror the less light and the less sharp the image, on top of potentially adding more distortions, thats just how physics work, same as with camera lenses. Now at the same time that 3mm eyepiece will not be able to be barlowed (even a 6mm is probably going to result in a rather dark and blurry image) and so it actually has less versatility than using a 6mm + barlow. As adviced in the video spend the extra buck to get a really good 2x Barlow for visual Astronomy so that your eyepiece quality doesnt get dragged down by it.
@@cptpayday2080 Sweet ! Thanks :)
I got my first rocky reflector telescope x 215.
There's no vertical adjustment, I got bag filled with lenses but I don't know where to put them amd the whole tripod is almost flipping over by the weight from the metal brick in the bottom. 😢😮
Love your videos Jason! Ok if I reference you on my videos?
Hello Jones Astronomy. Thank you my friend, no problem at all, I would be honoured.
Did you also mention that using a 2X Barlow also doubles the focal ratio of your scope? This can lead to a much dimmer visual image.
Any magnification reduces the brightness of the image
hmmm... as I'm a beginner, I wonder if a higher X Barlow wouldn't be a bad thing when viewing a bright object, like the moon. Higher magnification for more surface detail, and perhaps reduce the need for a moon filter for the brightness in certain circumstances. ....just wondering.
@@petset77 Using a barlow will split your eyepieces exit pupil in half.
I had just purchased a Gskyer explorer 130EQ - It came with 7 lenses. I now know the 3barlow, but the rest are all Greek to me. There aren't any labels or engravings to tell what each lens size is. Is there a way of measuring to identify these?
Hello Charles. Mmmm, that's odd.. There isn't a exact way of knowing but for a good clue to what power they are, lower powered eyepieces usually have larger diameter lenses the higher the power the smaller the diameter of the lens will be. Hope this helps.
I've got a Celestron 130az dx. I've bought a 5mm x-cel lx and a 2x barlow, same model line. They don't work together. It should give me 260x magnification. but it isn't working. Am I pushing my scope too far???
Hello there.. Yes you are really.. You will probably get away with that combo on the moon but with the planets and anything else your pushing your luck a little. For that amount of power/magnification with your telescope the seeing conditions would have to be perfect to get any thing like a decent view. You would be far better off just using the eyepiece on it's own.. I also have a 130 mm telescope and very rarely go above 150 x. Telescopes are like anything that has a max, if you go beyond it usually bad things happen.. Always start with low power and gradually increase the power. Remember, less is more :)
@@smalloptics753 Telescopes in any event are limited to our atmosphere, so there's only so much one can do with any telescope!
I've read that the SV105 camera has a field of view equivalent to looking through a 4mm eyepiece.
My telescope has a 900mm focal length and an aperture / mirror size of 130mm (maximum recommended magnification of 260x). If I use a 4mm eyepiece that's a magnification of 225x so adding a 2x Barlow pushes the magnification past the maximum limit to 450x.
As the camera field of view is similar to a 4mm eyepiece does the same limit apply? If I use a 2x / 3x / 5x Barlow will the camera get a blurry image?
I have the sv305. And use it with my 2 x Barlow with great results... and I’m even using a 1950s Lafayette refractor. 60mm 800mm. No blur. But focus is real touchy.
As I understand Barlow lenses, they're multiplying the focal length, your 900 becomes 1800, if it's a 2x and 2700 if 3x, and so on, therefore your max rises too.
Televue are my favorite
Thanks again!
Thank you.
thx bro❤
A standing Ovation to you my friend and at last some one who knows how to teach and make it easy and a joy to at last let the not so talented catch up ,indeed a Standing Ovation ,Brian
I read that a Barlow lens can alter the eye-relief whereas a "focal extender" (which does the same job) will not alter it. Is this correct?
Hi, I bought the Celestron Omni x2 barlow and unlike the eyepieces, it does not sit tight in the diagonal. It moves and wobbles which is quite annoying. Is that normal?
Hello dioni82. I've not noticed it to the extent you have, but one thing you can do is put a strip of insulating tape around the barrel to tighten things up a little to make it more of a snug fit. I have come across this problem from time to time and the tape method even though simple always seems does the trick.. Hope this helps :)
@@smalloptics753 Thank you sir! I will give it a try.
great video! so well explained for the novice to understand!!!!!!!!!!!! am just starting out in astronomy/ astrophotography and so much to learn!!
Stupid question .... do all eyepieces fit all brands of telescope? or do I need to buy a particular Barlow lens for each brand?
Jason mentioned this in the video. He said it's the size of the slot either 1,25" diameter or 2" diameter. So, based on this, whatever size diameter slot your telescope takes, any brand will fit that size.
I want to buy a barlow within RS 2,000..So which barlow is best ...
Svbony x2 is ok for the money
Ok thank u
Hello friend. Like I say in the video as long as the barlow you want to buy is a brand name like SkyWatcher, Celestron, Svbony ect, you will be OK.
Take care :)
All my stuff other than scope is svbony because I am 13 with a limited budget
Will a barlow work with a bird Jones telescope?
Hello saucenotgravy1. To be honest I've never tried one with a Bird Jones. At first guess I would say probably not, because the lens in the focuser of a Bird Jones is a barlow itself, not only that, it's also a correctional lens for the spherical mirror. My advice is if at all possible borrow a barlow to try and see if it works.. Sorry I can't give you a straight answer but like I say I'm not that familiar with the Bird Jones design Take care :)
I use a 2x barlow on my powerseeker 127 along with a Celestron Zoom eyepiece.
@@johnmarler6735 how do you like your powerseeker 127eq?
@@saucenotgravy1 It's Ok I guess. I got it cheap to use until I can get something better. I have it on a Skywatcher GTI mount so, I'm not using the EQ mount that came with it. I
You forgot to mention the barlow also increases the f ratio.
ive found its a good place to put a filter so you can swap lens without changing the filter
amazing video thanks cant wait to see your others, super helpful 🫶🏻