I wonder why people keep saying 'Z44'. The 'IRF' is as much a part of the part number as the 'Z44' is. For example there's a logic level variant of the IRFZ44 called the IRLZ44. If you miss the first few letters you could be in a jam.
Dude with that 100kohm variable resistor alone with a 9v can go to 0-9v I use a 50kohm for a head light on my bike with a 12v and it can go 0-12v no problem that mosfet is better off used in a 0 to 50v variable voltage switch I found out bye testing the gate that it draws 0.000171 amps with a on off of voltage of 2-4v with a 20v Max you'll need a 245kohm resistor to reduce the volts to 8v and a 50k variable resistor to control it from 0 to 50v I did this for a DC generator I made that outputs 50v 40amps you'll need a heatsink and a fan have fun
I want to give you a suggestion for the 4th life hack. If you touch the first terminal of z44 with one hand and the head of z44 then the LED will glow medium. Try this bro.
@Alpha Vape - NO... Those Power is too high and you will electrocute or component burnt :(. You can do with Relays, but how would you get the " Source " to Power it?
1 LH... all power is dissap on mosfet, it is not supoust to be that way. mosfet is 0,044 ohm resist. and logic level not V lev to swich it... it is working but not efficent... 50% power from battery is consuming by mosfet and wasted.
These are not "Life Hacks" they are electronics projects. #1 - that cheap COB LED. the LEDS do not turn on all at the same time as they would in quality COB LED. #3 - Coarse amplifier, it needs biasing and proper impedance matching for best results. #3 - Useless unless you are building one of those plasma balls.. Anyways the added primary is a lazy AF thing, do your research and use the internal winding of the flyback.. #4 - just a touch switch, they make modules that can actually drive real and usable lights.
I wonder why people keep saying 'Z44'. The 'IRF' is as much a part of the part number as the 'Z44' is.
For example there's a logic level variant of the IRFZ44 called the IRLZ44. If you miss the first few letters you could be in a jam.
Dude with that 100kohm variable resistor alone with a 9v can go to 0-9v I use a 50kohm for a head light on my bike with a 12v and it can go 0-12v no problem that mosfet is better off used in a 0 to 50v variable voltage switch I found out bye testing the gate that it draws 0.000171 amps with a on off of voltage of 2-4v with a 20v Max you'll need a 245kohm resistor to reduce the volts to 8v and a 50k variable resistor to control it from 0 to 50v I did this for a DC generator I made that outputs 50v 40amps you'll need a heatsink and a fan have fun
All the projects are fantastic
More sound amplifier circuit please
bhai kahan gaye ab videos nhi aarhi???
Please make a video of lm7909cv negative voltage regulator simple schematic!!
Stereo circuit is not clear.
Disculpa pero como conectaste la parte del audífono en el segundo ejemplo??? No sé distingue! Pero increíble los tres!!! Te admiro!!!!
Nice
good explanation dude. no confusion what-so-ever.
Z44 ke jage par dusra use kar sakte he kya
usa un diodo zener de 3.3V o 5.6V para estabilizar el voltaje cuando la batería se desgaste.
I want to give you a suggestion for the 4th life hack. If you touch the first terminal of z44 with one hand and the head of z44 then the LED will glow medium. Try this bro.
Excellent sir
no use current reduced UpTo 65% ......only voltage varies.mosfet z44 project
That is a potentiometer
dont work with irfz44n?
Fantastic video
Nice video
Podrias dejar in pdf de los circuitos
Sir. Ham 12v Tak Variable Kar Sakte He?
Can I connect 5 volt mobile charger
Supply?
project 3 ko easy method se again video bnaye please matches latter ki zrorat khrm k tital se
12 v phr chalny wali
4:37 FAIL...
на тесте динамиков просто проорался, включил музыку с телефона и наложил сверху звук, бляяя
Ага, за это дизлайк.
Last thing can be upgraded to light touch switcher for room :D
@Alpha Vape
- NO... Those Power is too high and you will electrocute or component burnt :(. You can do with Relays, but how would you get the " Source " to Power it?
Sir ciruite samj nhi aaya stero wlaa pls btao na
4 no,, dui hat babohar kora led jalano sobvob??????
good job.thank you
Nice bro
you put background music at irritating levels. You do not want people to watch.
1 LH... all power is dissap on mosfet, it is not supoust to be that way.
mosfet is 0,044 ohm resist. and logic level not V lev to swich it...
it is working but not efficent... 50% power from battery is consuming by mosfet and wasted.
ดีมากดูแล้วได้ความรู้มาก
Sebastião Doinzete
Sir muje ek help chahia Sir how to covert 4volt dc to 2volt
Nice video..
Very nice
Thank you for your vidio ( terimakasih atas vidionya)
nice video
ap kon se state se hai
that's great
what if my mosfet iz pnp
Can I use 9-0-9 transformer
take me ogg your e-mail list as I am Blind and must have vocalization to help me tell what's happening.
These are not "Life Hacks" they are electronics projects.
#1 - that cheap COB LED. the LEDS do not turn on all at the same time as they would in quality COB LED.
#3 - Coarse amplifier, it needs biasing and proper impedance matching for best results.
#3 - Useless unless you are building one of those plasma balls.. Anyways the added primary is a lazy AF thing, do your research and use the internal winding of the flyback..
#4 - just a touch switch, they make modules that can actually drive real and usable lights.
28 led blinking circuit board ac 220 volt
awesome
Super bro thank u
I can use P55nf06 mosfet
RobertoRodiguse
Hello Russia
Bahut slow chalta hai
Nr 2. Major fault....dodgy music!
please Sir reply Dana
saya membuat begitu ndak mau bunyi
Ampeare howmuch
Bass
First
first viewer sir
Rohan Goswami jee
Thanks bro
1
awesome