Oh yeah put 50V in it, draw 100A with 5V Output and you will get 4.5kW dissipation xD There is a reeason why many linear power supplies end by around 30V 5A or they use multiple voltage stages on the input. @100A you have with only 10V difference between Input and output 1kW dissipation... good electric heater xD For this a switching/ stepdown concept is the better way.
It's very educative! Perhaps you can give some info on what are the functions of these circuit and components (in the description box or in the video)? Keep up the good work!
mosfet has power in pulsating mode as a switch, in this case, when charging at 4-10 amps, there is a big overheating, so in linear mode it is better to use npn and pnp transistors
* It is a simple circuit only , every body need 100A or 100000A ? We just addd more transistors , but if you want to be better , we must make it with current control + Voltage control too ,
Thank you so much for this video ‘can I use one mosfet has the same rated currents and voltage instead of theses (10) mosfets /also how can I increase the degree of protection of the mosfets Thank you sir.
Doesnt look like this channel answers peoples questions. They are the channels that I dont frequent again. Id say at a guess that the mosfets look like lrfz44, but dont quote me.
Dear Electricity Tesla, How to make controled cc cv, please make a circuit for veriable amps and voltage for 20 amps and 36v to 0 amp and 1v. 😊 I need help.
It depends on the voltage and distance of the input to the voltage regulator he's using about 8g pure copper I'd say it's good for 100 amps at outlet voltage of around 110v the outlet would fail before that thing
@chloeleedow7250 I was referring to the tiny wire plugged into the wall. It looks really small. Maybe 14awg if that. It's right next to the meter. I don't think that will push 100amps but the rest is OK size.
La neta. 😂😂😂 Si lo pryebas con ese ventilador entonces porque dice 100 amperios? Ese ese ventilador es de 9 u 12v y 2 amperios por lo tanto esa fuente si no aguanta mas no sirve. Gracias, saludos desde Colombia
@@davidbivens2246 ..@7:50 there's a brief showing of the schematic, it gives the mosfet type and input supply voltage> 50vdc , mosfets are rated at 10amps.
The circuit diagram is covered by an advertisement for the next film. This is not good for you! Put the drawing in the right place! Another time, think about the reprehensible behavior of the sharer, that he will hide useful details!
LMAO. REALLY? THIS WAS “CLEARLY EXPLAINED??” WELL, SINCE YOU NOW OBVIOUSLY HAVE A CLEAR EXPLANATION FROM THIS VIDEO WHEN OTHERS ARE A LITTLE LOST.. CAN YOU TELL ME WHAT THE SUPPLY VOLTAGE IS? THE TYPE OF MOSFETS USED? THE TYPE OF DIODE HE USED AT THE END, AND WHAT ITS RATED FOR? I’ll BE PATIENTLY WAITING FOR YOUR RESPONSE WITH THE INFORMATION THAT I “CLEARLY MISSED”
WTG champ. Builds a 100 amp regulated power supply and then demonstrates with something that would barely be using 1 amp. Not to mention, very poor workmanship.
You mean useless, right? IF YOU REALLY MEANT “USEFUL”. PLEASE TELL ME WHAT TYPE OF MOSFET HE USED…? NO..? WHAT ABOUT THE INPUT VOLTAGE..? WHAT VOLTAGE IS HE SUPPLYING THIS WITH..? HUH, YOU DONT KNOW…huh! What about the diode at the end of the video, DO YOU KNOW WHAT KIND IT IS? WHAT ITS RATED FOR? NO? CAN YOU AT LEAST TELL ME WHY YOU COMMENTED ON THIS POST SAYING (FULL OF “VERY” USEFUL INFORMATION)?? Why wouldn’t you just say I liked your video thanks for posting.. INSTEAD OF LYING?
Oh yeah put 50V in it, draw 100A with 5V Output and you will get 4.5kW dissipation xD There is a reeason why many linear power supplies end by around 30V 5A or they use multiple voltage stages on the input. @100A you have with only 10V difference between Input and output 1kW dissipation... good electric heater xD For this a switching/ stepdown concept is the better way.
What a fascinating channel. Anytime I read Tesla it peaks my interest. It was interesting watching this come together.
New friend here.
Great work on how to make 100AMP voltage ⚡️ friend. That cool
Wonderful sharing enjoyed 👍
Wow very impressive and praiseworthy video dear friend 👍
electrical science which is very motivating, thank you for sharing sis good luck & good health always 😊🙏🏼
You did a good job.👍👍👍great sharing ,getting from Shanghai China. 👍👍👍new friend here+1❤️❤️❤️
Interesting video. Big like
It is a very good circuit for 100 amp . It is the best. I have used this concept at many places in my house. Keep it up .
mntap sodaraku,,,.
Very nice video full of very useful information, thank you for sharing
Incrível vídeo 💗 deixando o like
Amazing and very nice information, thanks for sharing
Awesome video 👍
Just awesome 👏
не хило,для такого вентилятора и сто ампер-круто.
Nice sharing 👌👍 New friend 🔔✅👍🤝
Excellent Dear Sir !
It's very educative! Perhaps you can give some info on what are the functions of these circuit and components (in the description box or in the video)? Keep up the good work!
Yeah like talk
Thankyou for sharing this video my friend
Lk 22, great information my friend, thanks for sharing and please please in touch 👍👍👍
Nice sharing
Thanks for the support, have a great weekend👍🍒🌿
Why does the MOSFET heat up so high even though I use a cooler and a fan?
You have a lot of skill in this work, you did it well
good luck my friend
mosfet has power in pulsating mode as a switch, in this case, when charging at 4-10 amps, there is a big overheating, so in linear mode it is better to use npn and pnp transistors
Very nice video 👍👍 Let's stay connected 💕💕
Great
How to make power supply of 120v ac to 12v dc 100 amp?
great working tutorial
Nice 👌
Congratulation
Is it possible to add small capacitors?
* It is a simple circuit only , every body need 100A or 100000A ? We just addd more transistors , but if you want to be better , we must make it with current control + Voltage control too ,
Thank you so much for this video ‘can I use one mosfet has the same rated currents and voltage instead of theses (10) mosfets /also how can I increase the degree of protection of the mosfets Thank you sir.
Tutorial yang bagus.. Mungkin untuk menambah kekuatan volume suara atau daya listrik.. 🙏🙏💕💕
How many volts do you use for input voltage?
What type of diode did you use at the end?
What is mosfet no. As you made and how many ampere capacity per mosfet?
What is the transitor that you used ?
What kind of MOSFETs are those please?
You can use irf3205/ 540
6042N10
Can you make autoregulated amp.and voltage circuit?
You might show the circuit powering a load of 50 - 75 amps for a powered test.
Hi I add a few more transistor and the 50k no longer works but the circuit still working
Very nice vídeo
No it’s not. It’s fake!!
What kind of mosfet are these
Bom dia, muito bom o projeto, dê referências dos transistores,eu gostei
Teresina-Piauí, eu sou rádio amador
lovely project
Thanks for sharing.
what is the specs of the MOSFET?
Doesnt look like this channel answers peoples questions. They are the channels that I dont frequent again. Id say at a guess that the mosfets look like lrfz44, but dont quote me.
Hello, I will be grateful if you can help me, if we put 2 or 4 igbts of AUIRGPS4067D1 type in the MOSFETs, what will the other required parts be?
Fan wire conected from diod side or regulator side
Form Bangladesh. Thanks
Dear Electricity Tesla, How to make controled cc cv, please make a circuit for veriable amps and voltage for 20 amps and 36v to 0 amp and 1v. 😊 I need help.
𝗔𝘄𝗲𝘀𝗼𝗺𝗲 𝘀𝗵𝗮𝗿𝗶𝗻𝗴 nice👏👏
Thanks for this very useful video 💯💯👍🔔
Thanks so much for a wonderful vedeo please sir the name of resistor connected to black wire or grounding thank you
What id your power adapter specifications
can this be used to adjust the output voltage of mma stick welder?😅
This Person Needs a Much Hotter and Better Solder iron
I don't think you will get 100A from the tiny wire you plugged it into but looks good!
It depends on the voltage and distance of the input to the voltage regulator he's using about 8g pure copper I'd say it's good for 100 amps at outlet voltage of around 110v the outlet would fail before that thing
@chloeleedow7250 I was referring to the tiny wire plugged into the wall. It looks really small. Maybe 14awg if that. It's right next to the meter. I don't think that will push 100amps but the rest is OK size.
Can i use irf460 mosfets?
سلام استاد
استاد این ولتاژ ورودی DC رو ازاداپتور باید تامین کنیم متشکرم
useful knowledge. so you know the process. thank you
هل يصلح بين الواح الطاقة الشمسية والبطارية كمنظم شحن ارجو الافادة
Can this circuit be used for bicycles?
should be tested with some 50 amp equipment.
Oh god! This is a buffered voltage divider. Not a regular.
La neta. 😂😂😂 Si lo pryebas con ese ventilador entonces porque dice 100 amperios? Ese ese ventilador es de 9 u 12v y 2 amperios por lo tanto esa fuente si no aguanta mas no sirve. Gracias, saludos desde Colombia
What kind of motor is that?? Its bldc or dc motor???
Sir Can I charge 4.2V 130A Battery Pack?
My need 4.2V 50A Output circuit. Please ans
Thanks from Bangladesh.
Any idea how to add current limit
?????????? Where is 100A
Mosfet number and name and please tell me this method charge battery 12volt kindly reply 🙏
What is the function of diode in the output.. please
That's good but are you sure that the fan can survive with 100amp?
💥 boom
Is for ac or dc
No proof that it’s capable of 100 ampere. That little fan as a load proved not 100 amperes.
Cada transistor suporta 10A.
Ele colocou 10 transistor em paralelo ..
No final do vídeo tem o esquema
this is a liniar regulator?
Bhai mosfet ka number ki ne btana he?
IC number.....?
Thanks bro ❤
Whay you try in small Ampere 😂😂😂
100A......? Just kidding?
No explicas último componente!
Where's the 100amp load? smh
LIES!!! ALL LIES!! THIS IS STRONG ENOUGH TO RUN A 12v FAN
@@davidbivens2246 ..@7:50 there's a brief showing of the schematic, it gives the mosfet type and input supply voltage> 50vdc , mosfets are rated at 10amps.
Is not pure DC
The circuit diagram is covered by an advertisement for the next film. This is not good for you! Put the drawing in the right place! Another time, think about the reprehensible behavior of the sharer, that he will hide useful details!
if you see the full video you'll get a circuit diagram in the end
Very clearly explained.
LMAO. REALLY? THIS WAS “CLEARLY EXPLAINED??” WELL, SINCE YOU NOW OBVIOUSLY HAVE A CLEAR EXPLANATION FROM THIS VIDEO WHEN OTHERS ARE A LITTLE LOST.. CAN YOU TELL ME WHAT THE SUPPLY VOLTAGE IS? THE TYPE OF MOSFETS USED? THE TYPE OF DIODE HE USED AT THE END, AND WHAT ITS RATED FOR? I’ll BE PATIENTLY WAITING FOR YOUR RESPONSE WITH THE INFORMATION THAT I “CLEARLY MISSED”
Gambar bisu..
Fake not 100amp, not 10amp
Fake circuit
is fake, very fake
This is stupid doesn't even let u know what the mosfets he's using wtf is wrong with this picture!?! RUclips is getting worse by the day!!! Smfh
WTG champ. Builds a 100 amp regulated power supply and then demonstrates with something that would barely be using 1 amp. Not to mention, very poor workmanship.
lying Chinese thing, it doesn't work, there is no regulation.
Not good. 100a cannot be used long term.
Nice sharing
Very nice video full of very useful information, thank you for sharing
You mean useless, right? IF YOU REALLY MEANT “USEFUL”. PLEASE TELL ME WHAT TYPE OF MOSFET HE USED…? NO..? WHAT ABOUT THE INPUT VOLTAGE..? WHAT VOLTAGE IS HE SUPPLYING THIS WITH..? HUH, YOU DONT KNOW…huh! What about the diode at the end of the video, DO YOU KNOW WHAT KIND IT IS? WHAT ITS RATED FOR? NO? CAN YOU AT LEAST TELL ME WHY YOU COMMENTED ON THIS POST SAYING (FULL OF “VERY” USEFUL INFORMATION)?? Why wouldn’t you just say I liked your video thanks for posting.. INSTEAD OF LYING?