you are right first i took size code (length and width) then datasheet then thickness then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness) at final stage i found 16V 10uF, 16V 22uF, and 16 V 47uF, if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
well, he did narrow it down to 3 values. If you have a 2nd capacitor the same size on the board you could measure it. If no schematics are available you may just go with the largest value of that size and it could work. If still not lucky then try the smallest size. usually largest size will work because voltage is higher just the bigger ones cost ore and might not fit. I usually salvage something same size or bigger and just try it. I fixed a macbook the other day and just fitter a random cap, larger than the apple capacitor. It worked..
@@izzzzzz6normally if its light colour( white)the value is rated as pF, if its light brown it could be nF if its dark brown its uF(sometimes nF but bigger values) Thats what we noticed in the manufacturing company However some people saying its more about the material they have used, but whenever i have done the programs this theory was always worked for me.
He did show how to find the data sheets for these surface mounted capacitors. I had no idea how to do that before. He narrowed down the possibilities, and then seemed to confirm the hypothesis. Thank you, Haseeb. You are an inspiring teacher. Your content has made me a much more skilled technician
Hi, thank you for sharing this video. As you showed us, there are many capacitor ratings for the same capacitor dimensions. Here you were able to measure one good capacitor, but if that capacitor may be in short (reason for us to be checking for its value in most cases), it would be very hard to say for sure which capacitor should we be replacing... Could you please explain to us how can we proceed in case of a failed capacitor? Thank you very much. Greetings.
@ruimonteiro7523 first of all thanks for your valuable words in case a damaged capacitor, and we have multiple choices, then it is to try one by one and to find the result of the circuit
Thank you for sharing the decode method.I didn't know it, great. The SMD codes are always a pain. Several times I had semiconductors with codes I couldn't find in SMD code books or the Internet. In this cases a repair was not possible. Resistors have 2 code schemas too. Very sad. 😢😢
best regards for your valuable comment yes the SMD codes are a biggest headache, actually it is step to make thinks non-repaireable. that is the reason most of the SMD parts are coded with some unknown marking and the codes are not revealed anywhere
Gracias especiales por sus valiosas palabras. De hecho, es muy difícil decodificar y comparar las medidas con las hojas de datos para obtener las piezas exactas.
Well defined video. The value would be anyones guess if you had a burnt cap, but if you do some math on the circuit in question, you can arrive at the value,like he did when he identified the chip on the board.Even though the datasheet showed pin 4 useda 10, it was actually a 22. Likely a timing/speed change in operation, or ripple supression as he answered in his post
Masha Allah tbarek Allah, thank you so much for thus great explanation. May I ask what's the best temperature used and air flow level by hotairgun to desolder components avoiding destroying components and the board itself?
Thanks a lot dear brother 💕 We must consult datasheet for reflow soldering Temperature and maximum permissible time for hot air rework For example 240 degree for 5 second Or 300 degree for 3 second etc
in my routine first i took size code (length and width) then datasheet then thickness then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness) at final stage i found 16V 10uF, 16V 22uF, and 16 V 47uF, if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
yes there are too many approaches to find some closest match of the required component. by measurement by chedcking datasheet of the main ICs by finding similar circuit by searching schematics or service manuals
Hocam neden üzerine kodlarını yazmıyorlar üreticiler, bizi neden uğraştırıyorlar. Amaçları nedir. Smd dirençlerin üzerine yazıyorlar kondansatörlere neden yazmıyorlar. Bir makul sebebi var mı?
Sir, I watched your video about ESR, it was crystal clear. Only thing I am curious about is, how to determine the F in ESR calculation? On what basis do we determine Hz value?
As MLCC production techniques have improved considerably over the years you would also need to cross reference the approximate date of production of the circuit board with the datasheets you are using. In general though, desolder such a capacitor and measure it's capacitance as you showed. Then infer a suitable voltage rating based on other components in circuit. Then your good to go. There are other parameters that can be important. Dialectic strength for example. Although this is indicated by the color of the MLCC capacitor.
first i took size code (length and width) then datasheet then thickness then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness) at final stage i found 16V 10uF, 16V 22uF, and 16 V 47uF, if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
first took size code (length and width) then datasheet then thickness then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness) at final stage i found 16V 10uF, 16V 22uF, and 16 V 47uF, if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
This size code is applicable to almost all smd capacitors We can use online stores inventories as Digikey Mouser Rs-online Farnell Arrow Please check video number 1243A
Grazie mille per il tuo video. Il condensatore smd non ha il valore scritto questo video aiuta di capire qualcosa. Cosi dica e utile. Rispetto per lei. 👍🙏❤️
I think it would be much faster to use a good LCR-meter and measure the capacity. You can guess the voltage rating from the application or like you did with checking parallel components. Its not a problem when the voltage rating is a bit higher, but it shouldn't be less than the original.
My brother, you are not calling me a professor. You are a doctor. Could you please make a video of the device that you use to remove electronic elements from the board of this device that resembles an iron? Your student is from Egypt.
You are lucky , cap is in good condition , and not schort. If not ? Little advice...hot them , and check capaticance ...then find what kind of dielectric is.
Merhaba sevgili kardeşim, gerçekten birkaç yıldır SMD kartlar üzerinde çalışırken beni rahatsız eden bir şeyi öğrettin. Bu kondansatörlerin miktarını hiç araştırmamıştım ve hep o kondansatörün etrafındaki parçalardan almaya çalıştım. -tüketici ve sinir bozucu. Çeviri yapmak için Google'dan yardım aldım. Umarım anlarsınız. Size ve ailenize sağlık ve uzun ömürler dilerim.
Que complicado son las compañías con los componentes smd en ves de poner a un lado el valor escrito en la placa asi de fácil pero bueno compañías maliciosas
Dear Haseeb, Thank you for your videos. I want to run a 1.5 volt wall clock with a 3.7 volt 18650 lithium battery. How do I do this? Please make a video or a short.
u didnt find its value until u measured with multimeter.
you are right
first i took size code (length and width)
then datasheet
then thickness
then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness)
at final stage i found 16V 10uF,
16V 22uF,
and 16 V 47uF,
if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
well, he did narrow it down to 3 values. If you have a 2nd capacitor the same size on the board you could measure it. If no schematics are available you may just go with the largest value of that size and it could work. If still not lucky then try the smallest size. usually largest size will work because voltage is higher just the bigger ones cost ore and might not fit. I usually salvage something same size or bigger and just try it. I fixed a macbook the other day and just fitter a random cap, larger than the apple capacitor. It worked..
@@izzzzzz6normally if its light colour( white)the value is rated as pF, if its light brown it could be nF if its dark brown its uF(sometimes nF but bigger values)
Thats what we noticed in the manufacturing company
However some people saying its more about the material they have used, but whenever i have done the programs this theory was always worked for me.
Thank you very much for the info
He did show how to find the data sheets for these surface mounted capacitors. I had no idea how to do that before. He narrowed down the possibilities, and then seemed to confirm the hypothesis.
Thank you, Haseeb. You are an inspiring teacher. Your content has made me a much more skilled technician
استاد محترم جناب آپ اتنی تفصیل سے ویڈیو بناتے ہی، دیکھ کر مزہ آتا ہے اور اس طرح کی ویڈیوز کوئی نہیں بناتا۔
Thank you a lot for this guide about finding the right capacitor 👍
It's very helpful and so well clarified.
You are welcome!
Va alaikum salaam, jajakallah, aapka videos bahut informative. Thanks for your efforts. From Puducherry, India.
most welcome. it is my pleasure
I have no clue this was possible -until now! Thanks for sharing this video🤩. You've have gain new subscriber.
best regards. it is my pleasure to share.
thanks for subscribing
The first time i see we could find out the parameters. Good video
yes, this the only way to decode these parts in reverse order
Thank you. Have looked unsuccessfully for such info
Have looked unsuccessfully for such info????
do you mean, this video is not informative??
please reply for my calrification
Hi, thank you for sharing this video. As you showed us, there are many capacitor ratings for the same capacitor dimensions. Here you were able to measure one good capacitor, but if that capacitor may be in short (reason for us to be checking for its value in most cases), it would be very hard to say for sure which capacitor should we be replacing... Could you please explain to us how can we proceed in case of a failed capacitor? Thank you very much. Greetings.
@ruimonteiro7523 first of all thanks for your valuable words
in case a damaged capacitor, and we have multiple choices, then it is to try one by one and to find the result of the circuit
@@HaseebElectronics They mean that they have been searching unsuccessfully until now.
Aah
I got it now
Thanks a lot 💕
Great information. Thanks for sharing such a helpful video for finding smd non polar capacitors parameters. I didn’t know about that before
You are welcome, I'm glad this was helpful!
Excellent video. I was thinking it must be by size but had no idea how to read it.
Thank you for sharing the decode method.I didn't know it, great. The SMD codes are always a pain. Several times I had semiconductors with codes I couldn't find in SMD code books or the Internet. In this cases a repair was not possible. Resistors have 2 code schemas too. Very sad. 😢😢
best regards for your valuable comment
yes the SMD codes are a biggest headache, actually it is step to make thinks non-repaireable. that is the reason most of the SMD parts are coded with some unknown marking and the codes are not revealed anywhere
Maestro, thank you very much for the video.👍👍👍
This is the video I have been waiting for, for a long time. Thanks for sharing this video and this great information.
best regards. it is my pleasure
Thank you so much for sharing such valuable information 🙏
Thanks for your clear demonstration. Greetings from Germany. Subscribed.
best regards. it is my pleasure
Thank you
Which microscope you are using for smd work
Kindly suggest for me
best regards
i am using ANDONSTAR AD407Pro
sir explained very clearly
thanks
You are welcome
Very valuable info here, thank you sir! I won't have to guess anymore.
Muchas gracias, de verdad pensaba que no se podía, pero muy útil y de verdad que sos un crack 💪🏼💪🏼💪🏼
Gracias especiales por sus valiosas palabras. De hecho, es muy difícil decodificar y comparar las medidas con las hojas de datos para obtener las piezas exactas.
Well defined video. The value would be anyones guess if you had a burnt cap, but if you do some math on the circuit in question, you can arrive at the value,like he did when he identified the chip on the board.Even though the datasheet showed pin 4 useda 10, it was actually a 22. Likely a timing/speed change in operation, or ripple supression as he answered in his post
Thank you, very useful. Greetings from Italy.
You are welcome!
Valuable info.thank you bro.from India
It is my pleasure
What a great video! very clearly described. Thank you !
Masha Allah tbarek Allah, thank you so much for thus great explanation.
May I ask what's the best temperature used and air flow level by hotairgun to desolder components avoiding destroying components and the board itself?
Thanks a lot dear brother 💕
We must consult datasheet for reflow soldering
Temperature and maximum permissible time for hot air rework
For example 240 degree for 5 second
Or 300 degree for 3 second etc
@@HaseebElectronics
Thanks brother
Thankyou Haseeb
Thank you, brother, for the information. allah ydjazik May God reward you
Jazak Allah. It is my pleasure
Very good description sir, thanks
Most welcome
Is it a way to find out the capacitance when the capacitor was burn or brake ?
in my routine
first i took size code (length and width)
then datasheet
then thickness
then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness)
at final stage i found 16V 10uF,
16V 22uF,
and 16 V 47uF,
if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
I wondered if the capacitor was shown and recommended on the diagram for the IC. That might be a clue for the size if it can't be measured.
yes
there are too many approaches to find some closest match of the required component.
by measurement
by chedcking datasheet of the main ICs
by finding similar circuit
by searching schematics or service manuals
Bro Haseeb... Does this MLCC damaged ( broke down ) ? .
Then need to be replaced by a new one?
This MLCC is good. I removed it just to demonstrate
@@HaseebElectronics I'm asking in general ! Not about your test.
My point is in the other electronic boards!
This is very helpful information. Thankyou.
You are welcome!
Very good and useful information sir thanks for sharing this knowledge to us
best regards
This information is so helpful. Thank you
Спасибо большое 👍😊
Mashallah,,, Jazakallahu khairah,,, 👍
Very nice sir👌👍
Thanks and welcome
Hocam neden üzerine kodlarını yazmıyorlar üreticiler, bizi neden uğraştırıyorlar. Amaçları nedir. Smd dirençlerin üzerine yazıyorlar kondansatörlere neden yazmıyorlar. Bir makul sebebi var mı?
bence bu, şeyleri "onarılamaz" hale getirmek için
Sir, I watched your video about ESR, it was crystal clear. Only thing I am curious about is, how to determine the F in ESR calculation? On what basis do we determine Hz value?
❤❤ Excellent thanks for sharing❤❤
You are so welcome
Great video! Thank you !
it is my pleassure
THANK YOU VERY IMPORTANT INFORMATION
You are most welcome.
As MLCC production techniques have improved considerably over the years you would also need to cross reference the approximate date of production of the circuit board with the datasheets you are using.
In general though, desolder such a capacitor and measure it's capacitance as you showed. Then infer a suitable voltage rating based on other components in circuit. Then your good to go.
There are other parameters that can be important. Dialectic strength for example. Although this is indicated by the color of the MLCC capacitor.
What is to be done if capacitor is faulty, shorted..and you can not read capacitance? Where to go from there? Blessings my GURU!
first i took size code (length and width)
then datasheet
then thickness
then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness)
at final stage i found 16V 10uF,
16V 22uF,
and 16 V 47uF,
if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
Hi brother, many thanks for your great videos, can you please help me to find MAX1520 IC, is for cordless vacuum cleaner battery IC
it is my pleasure
i think this part number might be MAX15020 or MAX2015
please check part number again
Nice video,thanks:)
Thanks, it's my pleasure.
Very information video
You are very knowledge
How to find these details for damaged smd capacitor? Please tell
first took size code (length and width)
then datasheet
then thickness
then circuit comparision for finding capacitor voltage (because too many voltage values are available in same thickness)
at final stage i found 16V 10uF,
16V 22uF,
and 16 V 47uF,
if the capacitor is damaged then we can select any one of these 3 and testing the ripples at output stage for best fit component
@@HaseebElectronicsThank you Sir
Can you tell me equivalent mosfet of (SI4618DY-T1-E3)i cant find... Plz help me
alltransistors.com/mosfet/crsearch.php?&struct=MOSFET&polarity=N&pd=1.38&uds=30&ugsth=2.5&id=6.7&qg=8&rds=0.017&caps=SO8&cf=on
perfect. thank you
You're welcome!
Thank you very useful
You are welcome
Aap ne C35 ke liye jesa bataya hae kya bilkul ese hi C36, C38 aur C49 ke liye bhi measurements kr ke inki value jaan sakte hain ? Behad shukriya,,,
same method for all smd ceramic capacitors
@HaseebElectronics shukriya,,,
Very very informative video for electronics technician.Allah bless you dear ❤
It's my pleasure
What if the capacitor isn't made by Samsung, does this trick apply to other manufacturer as well ?
This size code is applicable to almost all smd capacitors
We can use online stores inventories as
Digikey
Mouser
Rs-online
Farnell
Arrow
Please check video number 1243A
Wa alaikum salaam wa rahmatullah thank you.
I am aiman,from Malaysia. can we decode smd kapasitor with datasheet but value +- 25%....i try what u teach, i get different value.
Componentes SMD são muito difícil encontrar seus valores, principalmente os capacitores que não tem nenhuma numeração
thanks you sir!
Most welcome!
Why have you used C35 in the first part of your video and then remove C37 So what value is C35 ?
both are same. as C37 was at a corner, so i preferred to remove it
in upcoming sessions i am planning to decode the other size codes
Molto bello, grazie mille
Excellent
Thank you so much 😀
Haseeb abi, hello from Turkey. Can you design and explain component tester circuit for us. And can you test this circuit that work or not? Thank you
thanks sir.
Most welcome
thanks
best regards
❤❤❤❤❤❤❤
Grazie mille per il tuo video. Il condensatore smd non ha il valore scritto questo video aiuta di capire qualcosa. Cosi dica e utile. Rispetto per lei. 👍🙏❤️
I think it would be much faster to use a good LCR-meter and measure the capacity. You can guess the voltage rating from the application or like you did with checking parallel components. Its not a problem when the voltage rating is a bit higher, but it shouldn't be less than the original.
NICE
Can you please make new videos on LR1551, LR553 analog signal CMOS IC???
My brother, you are not calling me a professor. You are a doctor. Could you please make a video of the device that you use to remove electronic elements from the board of this device that resembles an iron? Your student is from Egypt.
👌👌👍👍
👍👍👍👍👍.
Electronic scale meter name sir❤
Kaiweets KM601
Usually, you'll get pretty far by just replacing it with one of same physical size and color from any scrap board.
💐💯
Very think sir
Welcome
Thank you for the information.
Please share the contact detaila
best regards
whatsapp 00962-79-5608616
gmail id ashraf4ta4
You are lucky , cap is in good condition , and not schort. If not ?
Little advice...hot them , and check capaticance ...then find what kind of dielectric is.
Why dont they just stick with rainbow code. 🌈. If cap is short, you can only guess and be thankful of tolerances.
Merhaba sevgili kardeşim, gerçekten birkaç yıldır SMD kartlar üzerinde çalışırken beni rahatsız eden bir şeyi öğrettin. Bu kondansatörlerin miktarını hiç araştırmamıştım ve hep o kondansatörün etrafındaki parçalardan almaya çalıştım. -tüketici ve sinir bozucu. Çeviri yapmak için Google'dan yardım aldım. Umarım anlarsınız. Size ve ailenize sağlık ve uzun ömürler dilerim.
👍
What if the capacitor was made in China and is not of Samsung dimensions?
almost all manufacturers follow the same design standards
even chinese capacitors are decoded in same ways
Que complicado son las compañías con los componentes smd en ves de poner a un lado el valor escrito en la placa asi de fácil pero bueno compañías maliciosas
your over thinking it.
may be
but i use these techniques to decode it.
.
Dear Haseeb,
Thank you for your videos. I want to run a 1.5 volt wall clock with a 3.7 volt 18650 lithium battery. How do I do this? Please make a video or a short.
How to measure. Value using multimeter. Please make a tutorial.