It kind of sounded like Adam edited this one the way he was talking about painting the bay on the 13. if so im surprised we didn't get an ole double clip somewhere
For the black bars in your home garage: Yes its from the LEDs, they arent constsntly on. All LED lights essentially flash at an extremely high rate of speed. Because of your shutter speed on the camera being out of sync with the flash rate of the LED lights, you get that black bar. Depending on the camera you have, you should be able to use an Anti-flicker mode to help sync the camera up to what the sensor sees, but its not always perfect. Hooe this helps man!
My guess is Frankenstein, K24 bottom end with K20 Head? Most likely pulled before any damage to the valvetrain, but you always have such creative ideas I could be completely in left field.
@@justinlongpre789Should easily hit 300's with doing that high compression and good gas, idk If e85 is as useful in na builds compared to a race gas but either one of those should get him there
@ I think E85 is useful in the same way as a boosted car, but you won’t see the crazy difference like on a turbo application, but for sure high 200’s low 3’s is achievable with a 4Piston Oil pump, full bolt on and maybe some valvetrain
I think you should keep the cream color or do the secondary color on the exterior of the car. Sea foam green would look good in the engine bay but two toning it doesn’t make sense.
Man Adam we been waiting on this! Let's get them videos a little longer man I feel like I'm getting robbed with these 20 minute videos! Love the build and the journey this car has made!
Paint the frame rail like Tommy said and just paint that brace silver. I think it's going to look awesome, and I think you'll like it more once you actually see it. And I'm guessing you're going to drop in K20C1
Black Bars - Change your shutter speed. Shoot manual mode , 24 FPS and then start at 1/50 and keep ramping that shutter speed until the bars are gone! The lights above you are constantly flashing, our eyes just don't pick it up! But the camera does.
1 color bay. 2 tone always look funny in the bay. Especially If you do a tucked harness and clean up the accessories. But if you go the extra mile with matching the accessories and engine in the 2 tone.
Yeah, paint the frame rails the grey as well just up to the corner line where they meet the inner fender and also the lower rad support up to that seem where Tommy said to stop.
I would leave that little metal part that goes down from the hood latch seafoam and do the rest of the colors like you and Tommy talked about. Also the black bars while filming in your garage is because of the frame rate being close to the flickering of the LEDs in the garage.
You should put one of those in ground lifts in the home garage with no uprights so you can still open doors fully to dismantle interior but still get the car in the air if needed
Idk how it would end up turning out but in the engine bay instead of a straight harsh line, is there a possibility of a gentle fade from the grey to seafoam? Not sure how those colors would mesh together but I'm sure you def have the guys to pull it off and I think it would look pretty baller.
K24a jdm engine makes more torque than a k20a2 engine and with a turbo kit on it will see 500hp and be super reliable if built properly on a stock engine Reliable powerful and sounds incredible. So my guess is k24a. If it’s not a k24 going in then it’s another sr20🥱🥱
You gotta get yourself the heated pressure washer that runs off diesel piping hot water you damn near dont even need soap to get all the grease off etc
Honestly dude I kinda like the engine bay in the color that it is now, if you wanna repaint it for a better finish I'm cool with that but don't change the color to match the rest. Normally I'm not into non-matching bays but this one looks good.
The little projects can end up on the “THE LZ COMPOUND” RUclips. Throw in all the random clips on there. Also you can throw the reels you make on there too as shorts.
Regarding the black bars in the garage: change up the shutter speed of the camera. its a missmatch between shutter speed and the refresh rate of the lights that creates those bars.
Gonna assume a k24 bottom end, and k20 head. With a turbo. Since it won’t need a na exhaust manifold anymore and would need bigger fans for cooling it has to mean some boost is coming.
The black bar you get when filming in your garage is infact from the lights. They shine in the frequenze your camera films at, like 50hz. Ask Mike, he‘ll know. Solition would be different light source.
Perhaps when there are little projects (like the home garage renovations) you could still film them but maybe they go in the occasional eclectic video or on the compound channel or something?
I think a k24 being larger displacement should help to get that car when doing skids out of turns. I would think a 300whp k24 or something strong either a i6 like 1jz or a k24 not an SR and n/a with a big cam and nice exhaust maybe a nitrous express plate kit.
Adam LZ Great Video I'm glad your Honda Powered S13 now has it's power plant and I'm sorry to hear that it blowing out coolant and I hope it's fixable and I think your Honda Powered S13 would pretty cool with a two tone engine bay
No outro? Mike, this no vaping is taking a toll on the editing
It kind of sounded like Adam edited this one the way he was talking about painting the bay on the 13. if so im surprised we didn't get an ole double clip somewhere
@@toddbrown4185 adam def edited this
So, what, u want him to start vaping again cos u didnt see an outro 🤣
I didn't see an intro either
@@mustangthekitten7765 10:56 yep lmao
For the black bars in your home garage: Yes its from the LEDs, they arent constsntly on. All LED lights essentially flash at an extremely high rate of speed. Because of your shutter speed on the camera being out of sync with the flash rate of the LED lights, you get that black bar. Depending on the camera you have, you should be able to use an Anti-flicker mode to help sync the camera up to what the sensor sees, but its not always perfect. Hooe this helps man!
My guess is Frankenstein, K24 bottom end with K20 Head? Most likely pulled before any damage to the valvetrain, but you always have such creative ideas I could be completely in left field.
That would be sickk
@ That would! In my mind it’s the perfect mix of rev happy 4 banger and torque, that 2.4 will get him closer to the 300 with forged internals
@@justinlongpre789Should easily hit 300's with doing that high compression and good gas, idk If e85 is as useful in na builds compared to a race gas but either one of those should get him there
@ I think E85 is useful in the same way as a boosted car, but you won’t see the crazy difference like on a turbo application, but for sure high 200’s low 3’s is achievable with a 4Piston Oil pump, full bolt on and maybe some valvetrain
sounds like a good, but they took out the trans, maybe an accord v6 😭😭
Sean crashing out was hilarious 10:58 🤣
yo that was freaking hilarious 😂😂😂
the subtle shade to the crx crash 😹
I like the two-tone engine bay idea 👍
The unhingedness is great, more please.
This is the most unorganized piece of media from this channel I have seen in a minute but funny and enjoyable
mike- "i used to work at valvoline" adam - HELP HELP HELP LMAOOO
Bro apologized to his own car lmao
Thank the lord you posted!!! My youtube feed was DRY!!!
Fr though thanks for all the work yall be putting in!
I love the 2 tone bay idea. I agree that doing it on a seam or natural line is the best call.
21:30 definitely true, space is always necessary to do things right.
This video reminded me of classic LZ videos and I loved it the comedy and just random conversations and arguments was hilarious!!
Yes, on the 2-tone engine bay.🔥
Adam mostly edited this video and holy crap im dying at it 😂the Sean crash out section got me good
I think you should keep the cream color or do the secondary color on the exterior of the car. Sea foam green would look good in the engine bay but two toning it doesn’t make sense.
CAN WE PLEASE GET MORE VIDEOS LIKE THIS! Yall have me crying im laughing so hard! the raw trueness of the LZMFG crew is top
tier😂
How does one comment in the description?😂😂 5:00
Had me dying 😂
Perfect upload time for Australia 🫶
yes
Man Adam we been waiting on this! Let's get them videos a little longer man I feel like I'm getting robbed with these 20 minute videos! Love the build and the journey this car has made!
Paint the frame rail like Tommy said and just paint that brace silver. I think it's going to look awesome, and I think you'll like it more once you actually see it. And I'm guessing you're going to drop in K20C1
love the new editing style! and the more raw parts without much cuts.also more memes!
Hoping it's a crazy J series build.
Lmao the coolant panic 😂😂
I love how unhinged this video is need more of this😂😂
Perfect upload time for Australia 🦘.
Black Bars - Change your shutter speed. Shoot manual mode , 24 FPS and then start at 1/50 and keep ramping that shutter speed until the bars are gone! The lights above you are constantly flashing, our eyes just don't pick it up! But the camera does.
1 color bay. 2 tone always look funny in the bay. Especially If you do a tucked harness and clean up the accessories. But if you go the extra mile with matching the accessories and engine in the 2 tone.
Yeah, paint the frame rails the grey as well just up to the corner line where they meet the inner fender and also the lower rad support up to that seem where Tommy said to stop.
Fav video as of lately. love the unhindgeded-ness
I would leave that little metal part that goes down from the hood latch seafoam and do the rest of the colors like you and Tommy talked about.
Also the black bars while filming in your garage is because of the frame rate being close to the flickering of the LEDs in the garage.
i like what tom said about riding the frame line. the middle bracket i'd do trim black to look like an OEM part.
TWO TONE the Bay!! ✅
You should put one of those in ground lifts in the home garage with no uprights so you can still open doors fully to dismantle interior but still get the car in the air if needed
Idk how it would end up turning out but in the engine bay instead of a straight harsh line, is there a possibility of a gentle fade from the grey to seafoam? Not sure how those colors would mesh together but I'm sure you def have the guys to pull it off and I think it would look pretty baller.
I dig that exterior color with the cream engine bay! Looks so good and different!
For the black bar, just change shutter sleed for nultiples of your electricity frequency (usually 50), so 25 or 50 fps would work, i guess
Who doesn't love a little bit of unorganized madness in an LZ video.
Good afternoon
10:56 that foo GLITCHES OUT ⚡haha
K24a jdm engine makes more torque than a k20a2 engine and with a turbo kit on it will see 500hp and be super reliable if built properly on a stock engine Reliable powerful and sounds incredible. So my guess is k24a. If it’s not a k24 going in then it’s another sr20🥱🥱
This is really great! Humility with such funny content is a rare find.
3:44 “Mike..MIKE.. help! HELP!” 💀
I reluctantly agree with Tommy about the two-tone idea, lol. I do like the idea though.
"It will be loose because of me rather than because of the last guy" 😂😂
10:57 i was waiting for it to turn into dubstep 🤣🤣
The 2 tone idea is great and I think it would work well
😂😂😂 f'ing Booth is a wild boyyyyyy!
Bro had me belly laughing 😅
for me it would be perfect if it had a sr20de with itb kit and some nice cams!
That would be sick!!!
I like this. I also didn't say hewas staying Honda powered, NA SR20DE VE Neo with cams.
17:58 use the seam sealer crack as the paint line, gray below
You gotta get yourself the heated pressure washer that runs off diesel piping hot water you damn near dont even need soap to get all the grease off etc
love this style of videos reminds me of working on my car with the homies
“I’m gonna dive headfirst into this engine bay, and it’s gonna hurt” 😅
"its gonna be loose because of me, rather than because of the last guy" -Every man's thoughts. Adam speaking for everyone there.
Top of frame rail for sure
Do the two tone bay it'll look cool and keep clean easier since the rails are the first thing to get gross in the engine bay
“Thpinal” fucking got me dying🤣
Your videos are always so colorful and fun! Thank you for your sincerity and talent in creating funny content!🌠🏞🍎
Honestly dude I kinda like the engine bay in the color that it is now, if you wanna repaint it for a better finish I'm cool with that but don't change the color to match the rest. Normally I'm not into non-matching bays but this one looks good.
The little projects can end up on the “THE LZ COMPOUND” RUclips. Throw in all the random clips on there. Also you can throw the reels you make on there too as shorts.
Let's go!! 🔥🔥🔥
Keep killing the game lzmfg and drift HQ crews!
I like this format of video, very casual. Also 18:00 if I were you just spray the whole engine bay seafoam. More simple, less mistakes to be made.
Regarding the black bars in the garage: change up the shutter speed of the camera. its a missmatch between shutter speed and the refresh rate of the lights that creates those bars.
Squirt squirt to the face was crazy 😂😂
My guess is on a k24z3 head, it has a single exhaust port so you can direct mount a turbo to it
I’ve actually wondered if this would work I didn’t know he did it 😂😂
Black lines are most likely your shutter speed setting on the camera. Gonna have to go manual or shutter priority but easy fix.
Gonna assume a k24 bottom end, and k20 head. With a turbo. Since it won’t need a na exhaust manifold anymore and would need bigger fans for cooling it has to mean some boost is coming.
The chaser in the background looking like a taxi 😂
Nice Silvia mate
Adam telling the s13 sorry after stepping on it😂😂😂😂he understands 🔥🔥🔥
1:30 built turbo k20?
F20/F22 maybe? probably be a decently cool swap since it revs so high (in the f20 at least)
f20c would be so sick (turbo or na )
The black bar you get when filming in your garage is infact from the lights. They shine in the frequenze your camera films at, like 50hz. Ask Mike, he‘ll know.
Solition would be different light source.
Omg the 15 looks amazing. Adam it 100% needs the newer vvl valve cover it’s sexy as hell.
I love this body style of s13
I reckon the two-tone engine bay would be sick!
Perhaps when there are little projects (like the home garage renovations) you could still film them but maybe they go in the occasional eclectic video or on the compound channel or something?
Spinal!!!!!! Lmao I’m sick this just made me choke😂😂 thanks for the throwback
Nice cars 🔥😤
Omg an RB25 would be the most perfect fit for this car and setup to sound like the car Paul Walker drove in fast and furious.
I’m impressed by how well Adam spoke Spanish!! Heck yeah🥳
1:10 CRX
I think a k24 being larger displacement should help to get that car when doing skids out of turns. I would think a 300whp k24 or something strong either a i6 like 1jz or a k24 not an SR and n/a with a big cam and nice exhaust maybe a nitrous express plate kit.
use a lower frame rate on your camera around the led lights, they flicker super fast and the high frame rate camera can pick it up.
What a beautiful car love the two tone engine bay I kinda wanna see you go all out on it
I BET its gonna be a honda s2000 motor, the F22! Im not a honda boy just a car nerd. Only makes sense being that it’s Adam and his BALLER WAYSZZZZ!
I’ll bet you that’s the last motor he’d put in a drift car 😂 it’s definitely gonna be a k24 block for the low end torque needed for drifting
@ we shall see! If he’s considering cost of it blows up sure if not gotta be that s2000 limiter
The adhd content suits me great. I personally prefer it to the strict uploads about only one topicc
love all the way from south africa cape town❤❤
I think the split paint would be an awesome idea , definitely different but in a good way , I’m sure yall would kill it either way!!
Adam LZ Great Video I'm glad your Honda Powered S13 now has it's power plant and I'm sorry to hear that it blowing out coolant and I hope it's fixable and I think your Honda Powered S13 would pretty cool with a two tone engine bay
Good man Sunday night Upload 🤙💯 with a bank Holiday Monday 🎉 (means we are off work tomorrow) 🇮🇪
20:40 Maybe those black bars happen because the framerate and the oscillation of the lights are matching up?
Straight pipe, I had it on my Honda race car. It was awesome.
two tone 240s are the best looking. I wish they made these all the way through 93-94.
Adam you gotta start stretching ma man you be throwing out that back a lot 😂
I like when you include some other projects in the videos and not just focusing on one thing the whole video🔥🔥🔥
Love it here
Sean's tee shirt is fire! T&T flag!