Awesome video… I’m glad ya went ahead and made this video public… you’re gonna have rule breakers being built left n right now 💪. I got caught up a little with work but I do have all the parts to build 3 and I have all summer off so I will be building them in July and I’ll send ya some pics to show finished products. Can’t wait 💪 🔈 🎶
Great video -- I'm building my 1st crossover and separating the network, highs / lows, so I can bi-amp. It can be confusing if you don't think about it in a separate network.
Back in the 90's before the intenet, I would go to the library and read as many books as I could on sound and wiring. I can remember just staring at schematics like this trying to figure them out.
Could you please make a video on how to replace the crossover of an existing bookshelf speaker with an upgraded one? and also how to upgrade its binding posts.. much appreciated
Great video! I have watched most of your videos and will probably buy some plans. Question: Do your plans include the parts we need to buy for the crossover?
Thank you! I a glad to hear it. as far as the plans go, yes they do include the parts you need to buy for the crossovers as well as the crossover diagrams. And if you need any help with that aspect of it, just let me know.
Toid, I didn't see you mention this and maybe its a dumb question, but do you typically use a specific crossover board to hold all the components or just a piece of MDF? Or does it matter? I was thinking about 3D printing something.
is there a wattage required in choosing a coil and some other parts in making a diy crossover/dividing network? I have a 700watts subwoofer speaker and I want to try in making my own dividing network like you do sir. hope you'll enlighten me on how to make these and the parts that I need to make one. thanks!
The inductor on the low end makes sense and is very common in crossovers, but the inductor on the "tweeter" has me a bit curious...are you applying a high frequency filter on the tweeter to give it a warmer sound?...I don't know what the top end rolloff is on that, but I'm guessing your aim is to prevent unwanted high frequency outside its specs from going to it?
Yes. Although that’s not really the point of this video. The point of this video is just to show you how to read someone else’s schematic and then build it.
I have a question. On the first part of the video you used an Air Coil Inductor, But in the second you used an Iron Core Inductor. Why and what is the benefit of either?
There is a few benefits, but in general when you are using an inductor for a high pass, you will use an air core. On a low pass, you will use a solid core.
Hey @Toid ok I put together this crossover and everything is correct. Now my question is? If I wanted to hook my speaker up to get the best sound Being as though I'm dealing with "RCA" , I can use a speakon to connect to the amplifier do I have to get another RCA to speak on connector on the other end of the RCA let's say for example I'm hooking up a subwoofer One is the speak on to RCA three-pin The other end would be RCA. For to hook up to the speaker hopefully I'm making sense. Do I have to get a reversal RCA to speakon to get the better sound.? Apologize for this long question. But thank you and this is actually for anybody to answer in the community. Thank you
Another question, When you are designing crossovers using XSIM do you just use the FRD and ZMA files from the driver manufacture or do you actually put the drivers in your baffle and take a measurement of each driver and use that actual graph to load into XSIM? Seems if you used your actual measured graph you would not need to figure in a baffle compensation circuit?
That’s a great question. The way that I do this is I do take measurements directly from the drivers in the baffle. I take a measurement of just a tweeter, a measurement of just a woofer, and then a measurement of both of them wired in parallel. Once you do this, you can import the information into XM and also figure out your Z offset which will help you get phase alignment when your design in the crossover. I went over there in my Xsim tips and tricks video.
@@Toid Thank you, I will look for that video, I need to understand Z offset and phase alignment a little better. I have been designing crossovers using XSIM and factory FRD files but really they would be different if I used actual measured graphs off the baffles I would be using, makes since.
Curious why R1 is after your cap and inductor and not before? seems like your impedance would be better if the resistor was before that inductor so it is not loading the amplifier as much. I understand an LPAD would be after but this is no LPAD.
@@Toid Thank you Toid! I just watched that video good stuff I understand why you may of used that resistor there now. I love the science behind crossover design. I have made about 50 crossover designs using XSIM and FRD' etc... I have made several FRD's and ZMA,s using FP Graph tracer. love it lol.
Literally a break down of step by step instructions on how to build a crossover and you say it’s messy??? Only way it could have been better would be to show the assembly piece by piece as well… besides that… it’s a great tutorial… now your channel. Now that’s a “mess” 👍 @toidsdiyaudio keep it up man… solid video 👍
@@Toid I would have just follow the schematic and not fly over explanations that dont make any sense and have no continuity whatsoever You dont even show the final result !
@@philipperostin I am very confused. I did show the final result. And I started by explaining what all the parts on the schematic were and then showed you how to read it. It does you no good if you don’t understand how to read the schematic. It seems as if you’re in the minority, so this video must not be for you. Hopefully you can find one that helps you out.
Awesome video… I’m glad ya went ahead and made this video public… you’re gonna have rule breakers being built left n right now 💪. I got caught up a little with work but I do have all the parts to build 3 and I have all summer off so I will be building them in July and I’ll send ya some pics to show finished products. Can’t wait 💪 🔈 🎶
I can’t wait! This is going to be Epic!
building mine now!
THANKS FOR THE EFFORT ....WHILE MY SON IS DOING HIS PROJECT AT SCHOOL I WAS ALSO HOOKED UP TO IT .....DAMN MORE COFFEE
Great video -- I'm building my 1st crossover and separating the network, highs / lows, so I can bi-amp. It can be confusing if you don't think about it in a separate network.
Great video with solid advice.
Thanks for using a real crossover as an example!
You’re welcome. I was hoping that would be helpful.
Thank you for the great instructions!
Back in the 90's before the intenet, I would go to the library and read as many books as I could on sound and wiring. I can remember just staring at schematics like this trying to figure them out.
Yeah, it’s definitely much easier once you understand how to read it.
Thank you for explaining this
Could you please make a video on how to replace the crossover of an existing bookshelf speaker with an upgraded one? and also how to upgrade its binding posts.. much appreciated
Great video! I have watched most of your videos and will probably buy some plans. Question: Do your plans include the parts we need to buy for the crossover?
Thank you! I a glad to hear it. as far as the plans go, yes they do include the parts you need to buy for the crossovers as well as the crossover diagrams. And if you need any help with that aspect of it, just let me know.
Toid, I didn't see you mention this and maybe its a dumb question, but do you typically use a specific crossover board to hold all the components or just a piece of MDF? Or does it matter? I was thinking about 3D printing something.
is there a wattage required in choosing a coil and some other parts in making a diy crossover/dividing network? I have a 700watts subwoofer speaker and I want to try in making my own dividing network like you do sir. hope you'll enlighten me on how to make these and the parts that I need to make one. thanks!
The inductor on the low end makes sense and is very common in crossovers, but the inductor on the "tweeter" has me a bit curious...are you applying a high frequency filter on the tweeter to give it a warmer sound?...I don't know what the top end rolloff is on that, but I'm guessing your aim is to prevent unwanted high frequency outside its specs from going to it?
That’s a typical second order high pass.
Are you accounting for ohm load when connecting the two woofers ?
Yes. Although that’s not really the point of this video. The point of this video is just to show you how to read someone else’s schematic and then build it.
Will this work with BTL loads?
I have a question. On the first part of the video you used an Air Coil Inductor, But in the second you used an Iron Core Inductor. Why and what is the benefit of either?
There is a few benefits, but in general when you are using an inductor for a high pass, you will use an air core. On a low pass, you will use a solid core.
@@Toid Thanks for taking the time to answer me. It was probably a stupid question.
Why you doesn't use a ferrit ring with 10000 permeability? It's good and use little meters if wire ?
Hey @Toid ok I put together this crossover and everything is correct. Now my question is? If I wanted to hook my speaker up to get the best sound Being as though I'm dealing with "RCA" , I can use a speakon to connect to the amplifier do I have to get another RCA to speak on connector on the other end of the RCA let's say for example I'm hooking up a subwoofer One is the speak on to RCA three-pin The other end would be RCA. For to hook up to the speaker hopefully I'm making sense. Do I have to get a reversal RCA to speakon to get the better sound.? Apologize for this long question. But thank you and this is actually for anybody to answer in the community. Thank you
What brand of the speaker did he use😊
Another question, When you are designing crossovers using XSIM do you just use the FRD and ZMA files from the driver manufacture or do you actually put the drivers in your baffle and take a measurement of each driver and use that actual graph to load into XSIM? Seems if you used your actual measured graph you would not need to figure in a baffle compensation circuit?
That’s a great question. The way that I do this is I do take measurements directly from the drivers in the baffle. I take a measurement of just a tweeter, a measurement of just a woofer, and then a measurement of both of them wired in parallel. Once you do this, you can import the information into XM and also figure out your Z offset which will help you get phase alignment when your design in the crossover. I went over there in my Xsim tips and tricks video.
@@Toid Thank you, I will look for that video, I need to understand Z offset and phase alignment a little better. I have been designing crossovers using XSIM and factory FRD files but really they would be different if I used actual measured graphs off the baffles I would be using, makes since.
What is the purpose for the resistor for ?
This might help explain it: ruclips.net/video/zoLBnEdVP6c/видео.html
Curious why R1 is after your cap and inductor and not before? seems like your impedance would be better if the resistor was before that inductor so it is not loading the amplifier as much. I understand an LPAD would be after but this is no LPAD.
This may help: ruclips.net/video/zoLBnEdVP6c/видео.html
@@Toid Thank you Toid! I just watched that video good stuff I understand why you may of used that resistor there now. I love the science behind crossover design. I have made about 50 crossover designs using XSIM and FRD' etc... I have made several FRD's and ZMA,s using FP Graph tracer. love it lol.
What are the values on all those parts?
how are the connectors on 5:50 called?
👍👍
I tried to open an account, but it didn’t work. I have a question. Thx!
Wht a messy way to explain it and even worse doing !
Really? What would you have done differently?
Literally a break down of step by step instructions on how to build a crossover and you say it’s messy??? Only way it could have been better would be to show the assembly piece by piece as well… besides that… it’s a great tutorial… now your channel. Now that’s a “mess” 👍 @toidsdiyaudio keep it up man… solid video 👍
@@Toid I would have just follow the schematic and not fly over explanations that dont make any sense and have no continuity whatsoever You dont even show the final result !
@@philipperostin I am very confused. I did show the final result. And I started by explaining what all the parts on the schematic were and then showed you how to read it. It does you no good if you don’t understand how to read the schematic. It seems as if you’re in the minority, so this video must not be for you. Hopefully you can find one that helps you out.