【シンセサイザー】Roland JP-8000 が壊れていたので修理する【テストモード】
HTML-код
- Опубликовано: 12 сен 2024
- ※修理は自己責任※
SuperSawで有名なRoland JP-8000の修理をしました。
動画で紹介を忘れていますが、
シンセサイザーを修理する場合は「製品名 サービスノート」
で検索すると内部用の資料が出てくることがあります。
特に有名メーカーの古いシンセサイザーは丁寧な資料が出てきます。
----------------------------------------------------------------
■Twitter
KeyboardMaestro@KMaestroProject( / kmaestroproject )
P小野塚@onozukaKikaku( / onozukakikaku )
↓MIDIキーボード専用音楽ゲーム「Keyboard Maestro」
■BOOTH (Windows版はこちら)
製品版:onozukaplan.bo...
体験版:onozukaplan.bo...
スーパービデオ! 特に、詳細なサービステストの手順とデモをありがとうございました。Super video! Especially thank you for the detail service testing procedure and demonstration.
4:11 I love this background music
BANGER
私もjp-8000持ちですが、とても参考になりました。お礼にチャンネル登録ならびにいいネさせていただきました。有難うございました。
どうもありがとうマエストロ!
Thank you very much Keyboard Maestro!
I recently purchased a second hand JP-8000 and thought it had a broken pitch bend lever and maybe a corrupt EPROM. Your excellent video saved me! I managed to change the 3V battery and after your system check and calibration routine, the JP-8000 is working perfectly! :)
I only noticed that some of the sliders and control knobs are a bit jittery. Do you know if they just need cleaning or do they need to be replaced?
I saw that you replaced the capacitors. Currently, the output volume of my JP-8000 is still strong. Is it better to replace them anyway or can I wait until they fail (and the volume drops)?
Do you know if the same system test process exists for the Roland W-30? I was wondering if the pitch bend lever only needs to be recalibrated or if it is broken on my W-30 (it plays out of tune as the pitch bend seems to distort the pitch, albeit with the lever at the zero position.)
[Translated:]
最近、中古の JP-8000 を購入しましたが、ピッチベンドレバーが壊れていて、EPROM が壊れているのではないかと思いました。 あなたの素晴らしいビデオは私を救ってくれました! 3V バッテリーを交換することができました。システムチェックとキャリブレーションルーチンの後、JP-8000 は完璧に動作しています! :)
いくつかのスライダーとコントロール ノブが少しぎくしゃくしていることに気付きました。 クリーニングが必要なのか、交換が必要なのか知っていますか?
コンデンサーを交換したことがわかりました。 現在、私のJP-8000の出力量は依然として好調です。 とにかく交換した方が良いですか、それとも故障するまで (そして音量が下がるまで) 待つことができますか?
Roland W-30 にも同じシステム テスト プロセスが存在するかどうか知っていますか? ピッチ ベンド レバーを再調整するだけでよいのか、それとも私の W-30 で壊れているのか疑問に思っていました (レバーがゼロの位置にあるにもかかわらず、ピッチ ベンドがピッチを歪めているように見えるため、調子がずれて再生されます)。
Thank you for your comment!
If it can be fixed by cleaning, cleaning is better. The same parts may not be available.
About W-30, I cannot give you a detailed explanation, but a search for "Service Note W-30" or "Service Manual W-30" may give you some hints.
この動画を観て、20数年前に買ったしばらく使ってないJP-8000の電源を入れたら、音が全く出ず、LEDも点いたり点かなかったり…
これ修理に出して受け付けてくれますかね?
20年以上前に生産停止してるからダメって言われそうな気がします…。
昔YAMAHAの現場で修理の仕事してた時は古〜い機種も扱ってましたが、Rolandさんはどうなんでしょう?
勇者です
Here, get my 3 volt lithium powered upvote!
何でテストモードのやり方まで知ってるんですか。
YAMAHAの社員さんですか?