PURE-POWDER-PLEASURE!!😍 Cat 390F (operator😄), thriving while loading up a 💥powder pile!!💥
HTML-код
- Опубликовано: 27 май 2021
- One of the best blast piles ever!!😍 The blast crew certainly made this granite fine!! The pleasure of operation in these conditions, surely makes up for the blasts that’s harder to shift!🤪😅
Seems like our preparations for this blast payed off well, this is what I dream of every time I hear the thunderous sound of a blast going off!!🤩
#norwegianearthmovers
#cat390f
#cat772g
#doosanda40
#heavyequipment
#heavyearthmoving 
Авто/Мото
You are an excellent operator, one ofthe few I've seen loading shot rock that doesn't overload everything, falling off both sides and the back. The truck drivers must like hauling from you. Really enjoy the channel from here in Canada
Whoo hoo....another premiere, cant wait. . 🤸♀️🤸♀️🤸♀️🥳💃🇯🇲❤
Thanks for your enthusiasm!🙏😍 Well, I have been home during the weekend and this holiday, so I had to put it out before I go back to work today!😄
Poor internet where I live at work, and I needed to clear some space for new content that I plan to capture during this week!😅😉
@@norwegianearthmovers awesome
This is my favorite video and I've watched it literally 2 dozen times... probably more than that even! I just love it!!😊
Wow, this is just so fun to read!😍🙏😊 I really appreciate the love!
Should make apprentice operators watch your videos. Great written explanations of why you do what you do.
Loving the result of the blast. Loving the video. Great job as always. ❤🇯🇲
Thank you so much!🙏🤗
Looks awesome material makes for easy loading
A pile like this, is a rare matter of a dream coming true!🤩😅
Unfortunately, the average quality of the blasts, tends to be a little harder to load..🤪😄
22:34 thank you very much boss keep it up for me love you ❤❤
Top
Thank you!🙏🤗
Very good excavator & very good operator 👍👍
🙋♂️🙏🤗
Fantastic footage, I like that it's 45 minutes long. The recording is great. The loading is good, my question is where was the material taken, I'm not going to assume that it was sent to a crusher and get into gravel or road base material lol. Nice footage
Thank you so much!🙏🤗 You are right, this was not going to a crusher!😉
These truck loads were sent directly to the dozer, who had just as great time as I did, handling these materials!🤩😋
@@norwegianearthmovers I'm guessing 60-80 tons per load??
Hehe, the loads are a little bit smaller than that!😅
Payload capacity of about 50 tons on these 772’s!👌😋
The Orange trucks can't handle as much as the Yellow dumpers right?
You operate as I would, just the same. please keep your captions up longer, they fade to quickly to be able to read them , Smooth operator
Great job operator
Thank you!🙏 I do my best, nice that you liked it!😋
Excellent work Bernhard. Only thing I would change is when you are showing your caption text. It is not on the screen more than 2 seconds. My 20/20 vision and brain can not read them that fast. Keep up the great content my friend.
Thank you so much Marty!🤗🙏 I will keep your feedback in mind, but I must admit that I don’t know how to extend the texts..😅 I have a simple mind, so it takes long time to learn something new..🙈😂
Thanks for watching and for your comment!🙏
@@norwegianearthmovers I don't know which software you use for editing your videos, but on the story board there shoul be a text line which you can extend by tracking the end to more left or right
I’m a simple man, doing it as simple as possible by editing with iMovie on my iPhone..😅
I’m still learning, trying out different stuff to try to find out what’s best through failing.😄
I appreciate your feedback, and I will do my best to improve my skills in technology!🙏😅
@@norwegianearthmovers How do I extend the time of text in iMovie?
To make it longer or shorter, drag the right or left edges of the purple text bar. Make sure the text will be on screen long enough for someone to read it. If you do not want anything behind the text you can simply drop it into the timeline at the end or between clips.
@@ypebanbung-michael8865 thank you very much!🙏 I can’t say that I have seen additional bars on the timeline though, I have found another way of extending the texts since this video though.😅 I have just cut the timeline, and set the text to show that entire clip.🤭😆
I really appreciate your tips, I will surely look into this!😋
🔥
That material scoops up easily !! How often does the rock face break up into small material like this ? Why the blast makes small pieces compared to the BIG material, maybe has to do with the rock formation ?? Like your comments while loading, hold the comments a few seconds longer to read rather having to stop and go back. Bernard , like the view from the cab, it is what I would expect as if I were operating ! Your drivers are really in tuned with what you are doing, cleaning parking area, where you want them to park, when you are ready to load etc. It is called TEAM WORK!! Followed this video to the end, making comments as I watched.
Hey Arza!🙋♂️ Materials like this is just as dream to work with, it is in this kind of piles we really get to show what the machines can produce!🤩 But as always, blasts like this are gone “in a second”.. I have been accused to be lousy when it comes to saving piles like this by the blasters..😂😂 Spins through the fine ones, just to find something to spend more time with next..🤪😅
Well, there are several reasons for variations in the quality of the blasts.
Height of the cut has a lot to say, since deeper holes gives more room for explosives, and because the upper 2 meters tends to break up in boulders..😝😄 Access for drilling and drill pattern is up next, as there isn’t always that easy to reach every selected point for a hole every time. Just a little deviation from the target pattern, and there are several holes that gets too far distance between them! We want the explosives to have the same amount of volume between them, for a even and nice blast!😋
Talking about deviations, there also might be cracks in the rock, steering the drill head out of course, also resulting to a bad pattern..
The rock itself do hold various density and strength, some breaks easily, some don’t.. 🤪
Last but not least, the ignition pattern for the rows of holes, makes a huge difference! Every row is ignited with milliseconds between them, some blasters are awesome with their knowledge, others still has something to learn!😅
@@norwegianearthmovers Hey Bernard, thanks for the detail info..........as you know my background work was detail work for Massey Ferguson Inc.
Wow kwren banget spotnya
hehe, penggali peledakan batu seperti ini!🤩🤙😅
Skikkelig godsalve dette🤩
Ja, den var vare nydelig!!🤩😋👌
Saludos 😂😜🙋♂️
Hi!🙋♂️🙏
Skilful operator!
Thank you very much!🙏🙂 I do my best, and really appreciate it when someone recognizes my efforts!🤗
Hi friend! Great work💪
Hi!🙋♂️ Thank you very much!🙏😊
@@norwegianearthmovers what is your name??
My name is Bernhard!🙋♂️
Saludos.👏🙋♂️🙋♂️🙋♂️💋😂
😅🤗🙏🙋♂️
👏👏😂🙋♂️🙋♂️🙋♂️
Jakarta Indonesia 🇮🇩🇮🇩😃😃👍👍👍👍👍👍👍👍
🙋♂️🙏🤗🕺🏻
good job, greetings from Indonesia Chanel 👍
🙋♂️🙏🤗
@@norwegianearthmovers don't forget watching my Chanel 🙏
@@duniaalber3178 i will have a look!🙂
What is below the blast pile that you are getting at? Thank you.
I'm having my own excavation operation as I'm watching this, but pasta doesn't make for good fork loads.
Hehe, forks don’t lift much, indeed.😅 Have you tried a spoon?😄 Works better for me, unless I’m eating spaghetti though.😂
I really appreciate that you think my work is interesting enough to have it as amusement while you dine!🙏😄
CAT vẫn là ok nhất
I’m wondering what the weight of each pass is with that bucket?
Hi!🙋♂️ My experience is that I’m able to swing between 12 and 15 tons of rock in each pass!💪👌
I didn’t have a weight on this machine, but the trucks reported their net. payloads to me.😄
Would the old 5 tooth bucket be better in this material?
Hi Paul!🙋♂️ Yes, I think the old setup with 5 teeth would have been even more efficient in this kind of material!🤩
I just loose too much material between these 4 teeth, at the same time as every rock larger than powder seems to just jam between the teeth as the bucket are designed now.😝😅
I have been missing my fifth tooth for a while now, this pile made that feeling even stronger..🤪
If I can choose, I want a bucket with standard sides with changeable wear steel, and a slightly wider mid section of the knife with room for 3 teeth instead of 2!🤩
This knife is a bit more “pointy”, as the middle teeth are stretched 15 centimeters forward compared to the original setup! The old setup made the bucket too flat because of the width, the delta front were adjusted from 10 centimeters to 25 centimeters as it is now!
With 5 teeth, I would load the 772’s in 4 passes again, and kick my production up drastically!😅🤙
@@norwegianearthmovers That's a very technical explanation. Thank you for taking the time to explain.
@@ILikeDoritos456 you are welcome!😋Thank you for spending your time watching, and for sharing your thoughts!🙏🤗
Går dere over og finplanerer området der d lastes ut? Hvor fin på labben klarer du å være md planeringen?
Nei, det gjør vi ikke..😅 Jeg holder meg oftest innom +/- 10 cm, og det får vel være godt nok?🤪
Neida, jeg gjør så godt jeg kan fra pallen, men bare for at truckene skal ha god såle å kjøre på!😄 Ujevn såle betyr at de vil søle mys stein i vagging og hopping, og resultere i at jeg må laste små lass..😝 Jeg er ikke noe fan av små lass, så da investerer jeg litt tid i god såle så vi kan kjøre fulle lass, og samtidig øke levetiden på dekk, understell og sjåfører!😂
Når jeg er ferdig lastet, vendes hele sålen ved at en graver serverer stein fra klinken som en doser! All klink måles inn for dokumentasjon av under boring, og all stein over maks størrelsen tas ut for et perfekt resultat!😍
Da blir det fylling hele veien, og en strøken plate, servert av våre eminente doser førere!👌🤙
Ps. Hvis jeg vil, kan jeg planere stein med noen få cm avvik, men da må jeg stå nede så jeg dår beltet over hva jeg har planert før noen hjul kjøretøy får rullet over.😉 Hva som er slett før noen kjører der er ikke det etter de har fart over, om ikke steinen er beltet ned hard og jevn! Er akkurat den vektingen som gir dosere fortrinn når det kommer til å legge ut strøkne flater!🤙
Litt samme prosedyre som vi også har da. Har som oftes 1 mtr underboring, så da er d den meteren å vende på etter utlasting. Så kommer d an på hva flaten skal brukes til etterpå, er d mye grøfter eller fundamenter som skal graves ned så tar vi d i en og samme operasjon.
over all do you like the cat 390
A couple of seconds longer to read you're messages would bee good.
Thanks for your your feedback!🙏 Must admit that I’m a bit clumsy when it comes to technical stuff..🤪 I will do my best to improve though! Guess that I’m a slow learner..😂
But thanks for watching and for sharing your thoughts!🙏🤗
Hur mycket har ni kvar? tar det aldrig slut? xD
Hehe, skulle ønske det var mer jeg, er en veldig fin plass å være dette!😅
Jo, nå sitter jeg og later ut siste storsalve, blir bare plukk og opprydding etter at jeg går på fri til onsdag..😄
Gikk så alt for fort, håper på oppstart på nabo tomta snart!🤪
Wow I wanted some coals
what does this kind of work pay?
Well it depends on how long one has been working with this, as well as education has a rewarding factor!😋
We have our own currency, but I believe the salivary is somewhere between 2000 and 3000 euros per month.🙂
@@norwegianearthmovers sounds a lot like livin' the dream
For some reason it looks like those trucks can handle 5 or 6 scoops.
Hehe, I give them 5 buckets, and that’s about 50 tons!😉
These trucks are certified for 48 tons, but have a max limit of 54 tons!
@@norwegianearthmovers I stand corrected lol, the reason I said that is because they a lot of room on the rear that's all. Keep it up
@@johnnymurff4137 hehe, there has to be some room in the rear opening, or else there will be a lot of spills!😅
And I must admit that I answered thinking about the 772’s when I wrote.. The Doosan ADT’ load 40 tons, so they are one bucket and about 10 tons smaller when it comes to payload!😄 But, I can’t fill them entirely up towards the tailgate, since the material will bring enormous force to the tailgate when they are to dump! The gates are raised by two chains, and they can break if the downforce is too high!😅
And there is also a risk of spilling rock with too large loads on them as well!😄
@@norwegianearthmovers Yeah that's right I now that you explained it that way lol lol. Yep but I look forward to the next adventure. I gotta say, your company must have good scouts cause you always have major projects going on, and I enjoy seeing the blasted material gravel and blasted rock or stone being loaded and handled by the excavator and the wheel loader.
어느나라인가요?
Hi!🙋♂️ Sorry about embarrassing late reply..🙈😅
I am from Norway 🇳🇴😊
@@norwegianearthmovers thank you ~ im south korea ~
@@user-eo9wb1lo3l you are welcome!😊🙋♂️Greetings from me to you!🙏
@@norwegianearthmovers many video please ~ im excavato driver~~ thank you ..cat390 very good~~
Thank you for your enthusiasm!🙏🤗 Always nice to write with fellow operators!🥳
I have been sick for a long time, so I haven’t been able to work or make any videos..🥵😅
But my health is much better now, so I will be back in larger excavators in a couple of months now!😍
Just hoping for large projects now, so I can climb into the 390 or similar size machines again!🤩
Have been working a bit with a smaller machine lately, so I have posted some new videos of my comeback at work!🙃😄
Feel free to check them out!😅
Deilig md sånne salver, ikke bare å laste i, mn når man er i sluttfasen av en jobb og stort sett alle står og skriker på sukker til finpussen.
Det er helt sikkert!🤩 Hadde bare hver salve vært sånn så!😅 Like stort behov for fin stein helt fra begynnelsen til slutten av et prosjekt ja!🤙🤪
Alle blir bortskjemt av sånt, får fort tilbakemelding over hele fjøla når røysa endrer seg etter sånt som dette..😂
Your glass iss dirty
Would a Front loading Shovel be better for loading
Well, in this park pile, a wheel loader could have been used.😉
But mostly, an excavator is the best choice, as the production average is higher than on a wheel loader! More breakout force gives the excavators an advantage, when the pile gets rough! 😉 And the excavator can be used in several purposes, a wheel loader can only do one thing!😋
@@norwegianearthmovers oh i see
It’s such a shame when operating a nice machine
iam operator pls job me