Have mine on the bench behind me. not used it since unpacking 3 days ago. I do however believe they should have put a fuse in back or slither of plastic in across battery which needed removing before machine would turn on. That button could easily be pressed by someone or their children at the beginning. Soon as that button is pressed the carriage which is fixed to the steel bar you are removing moves to the left. so without it being able to I would guesstimate you ruin the machine before ever using it.
Very helpful video. I just received my dolphin however the cutter does not go all the way into the mounting hole so that it can be secured on the notched area. Probe goes in just fine into its mounting hole but not the cutter. Seems as if there is some obstruction Any ideas as to what may be the problem?
how to cut emergency key (skinny ekergency key) like LX90 and DA34? i had a customer for 2009 Toyota sieena but Dophine xp-005 cant cut like original key so i had to reorder just emergency key. please help me out my teacher
For the skinny lexus and toyota key u need to place a thin shim or metal shim to raise it up a bit... usually for nissan ill cut a mechanical metal key and then duplicate it On to the emergency key with my Condor XC-009
There is a slot where the screw grabs make sure that is face correctly toward screw and screw is nice and tight... you cutter is definitely not centered correctly .
Que tal muy buenos sus vídeo...gracias por compartir.. Pregunto esta usando la broka de corte 2.5mm.. Ya calibrada... Al cambiar a 1.5mm hay que volver a calibrar... Gran saludo y salud familiar
Hola maestro. Creo que tengo un problema con mi máquina xhorse ya se me an quebrado 3 descodificadores de corte. Cuando trato de hacer una copia universal
La copia nunca se hace por universal... se hace bajo de base de datos de vehiculos.. universal es cuando la llave no esta de bajo de base de datos vehículos o si la llave no tiene nombre ...tambien recomiendo que le utilizes el software a la version mas nueva.. y re calibrés todas las manos abcd m2 y m1 ..gracias a ti!
I just bought this machine Dolphin xp005. I keep getting probe not detected error. I have made many attempts to calibrate and have changed the probe as well. With no luck. I am not able to get help from anyone. Xhorse support is kind of useless and a waste of time. If you have idea or have seen and resolved this error, Id greatly appreciate your response. By the way love your videos. I have probably watched them all at least 3 times each.
@@MYKEYSAUTOMOTIVE Yes I have updated it to the latest firmware from pc. (did this twice). Its during height adjustment I get the Error 2 no probe detected. I tried the electric test, not sure what result i am supposed to get here. How long is the electric test supposed to take? I left it for about 2 min didnt give me any messages. How do I know if its grounding? Thank you for your time.
I think you make outstanding content, I really like this topics and its helping me identify what I need to open a new small business on the side. Great work!!
Do you think we have to do a clamp calibration everytime the clamps are exchanged? For example, I keep my machines and gear in portable stackable toolboxes to transport easily, but I keep the clamps off while in storage to avoid the table hitting anything. So you think I have to cal each time I power up since I keep my table empty?
I keep trying to do the height level adjustment like you showed, but an error code : 29 keeps popping up and I can’t get rid of it to do the height level adjustment. Do you know how to fix it? I can’t find any other videos about it.
Hi I just got my new XP-005, when You mention the cutting calibration using blank key hon 66, does that blank key come as part of the kit, or is that need to be ordered extra? Cause I don’t see it as a part that came with my XP-005. Thx for your videos!
Try not to disconnect from bluetooth when cutting a key by code ... also update to the latest software and calibrate adjustment heights and calibrate clamps
I searched hon66 on UHS and this came up. So the ho01 blade isnt the same size? Sorry for all the questions I'm just getting into this. I'm not even sure if this is the blade needed to calibrate yet as I'm waiting for the dolphin xp 007 to come not the 005 lol www.uhs-hardware.com/products/honda-ho01-high-security-test-blade-10-pack-mtk-ho01-1
Thanks for your excellent videos. I'm currently trying to figure out, if the XP-005 meet my requirements. Speaking for HU162T(9) or HU162T(10) I haven't seen any video on YT using this machine (only some single ones with the more expensive Mini). Would be excellent if you're able to show us the possibility of making those two newer ones with the XP-005. Keep up your great work, man!
Hi i want to find out im caught in between getting a Dolphin or a Condor mini plus do they have the same capabilities or the Condor has more superior functions
Buenas noches , amigos saben por qué en la app no me aparece en la lista opción de corte para llaves (bajaj , pulsar, discover , ktm , TVS ,.... ) Si alguien puede ayudarme a solucionar el esto se lo agradezco mucho es indispensable para mi trabajo.
Hello, friends, you know why the app does not appear in the list of the key cutting option (bajaj, pulsar, discover, ktm, TVS, ...). If someone can help me solve this, I appreciate it very much, it is essential for my job.
I want to buy this, I’m just starting… I can BARELY afford the og price… But I feel I need the added 3 year protection…Would you, DID YOU get the added protection??? Should I wait to gather that amount…(my credit is SH*T)
I just got a regular protection everything else like belt and blades and I have replaced my self ran me for about 3 years without an issue then the conveyer belt broke
Yoo thanks again about the brute Force cable info from the other day. 👍👍 I just thought it was ironic I just got this dolphin on Friday lol 3 days ago. Already lovin it! Wish I bought this machine before my last one! Great videos. Keep it up
Do you think we have to do a clamp calibration everytime the clamps are exchanged? For example, I keep my machines and gear in portable stackable toolboxes to transport easily, but I keep the clamps off while in storage to avoid the table hitting anything. So you think I have to cal each time I power up since I keep my table empty?
THinking about ordering one of these soon. Do you know if a bolt down kit is available? Or are there any trype of anchor points built into the machine?
Fantastic informative video , can you tell me what is that tool your using to enter the information ? Does it come with the machine and is it necessary to have for the machine or can you use a phone or iPad ? Thanks let me know..
Yeah, it’s on my RUclips channel, supplier just kept fobbing me off so I had to send it to a local repairer here in Australia. It should arrive there today and then I can post the diagnosis.
@@MYKEYSAUTOMOTIVE THE DOLPHINS GOT DIFFERENT SOFTWARE VERSIONS V1.1.8 ,V1.4.0, V1.2.0 AND... SO NOT SURE WHICH ONES ARE BETTER ONE TO BUY AND IS THERE ANY LATEST VERSION ATM?
Just bought one today and was recommended by LOCKSMITH EMPORIUM to watch your videos. I’m so glad he did bro, you’re videos are so informative! Subbed and ready to learn!
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Have mine on the bench behind me. not used it since unpacking 3 days ago. I do however believe they should have put a fuse in back or slither of plastic in across battery which needed removing before machine would turn on. That button could easily be pressed by someone or their children at the beginning. Soon as that button is pressed the carriage which is fixed to the steel bar you are removing moves to the left. so without it being able to I would guesstimate you ruin the machine before ever using it.
Thank you for sharing
ok
🤭🤭
I've had mine for 6 months..you'll love it nice tool!!! hope to see more vids from you on this tool.
Thank you !! Will be posting more video's soon thank you for watching!! Blessings!!
Very helpful video. I just received my dolphin however the cutter does not go all the way into the mounting hole so that it can be secured on the notched area. Probe goes in just fine into its mounting hole but not the cutter. Seems as if there is some obstruction
Any ideas as to what may be the problem?
Just force it a bit but lube it up first with houdini or wd40
I have it and been using it for 7 month now and I love it . I really don't have any problems with it
Nicee!! Thank you for sharing your experience with us!!!
Does it do latest code series? 2021 ford? New Hyundai Kia?
@@jmcoch66 haven't tried it on anything that new yet
how to cut emergency key (skinny ekergency key) like LX90 and DA34?
i had a customer for 2009 Toyota sieena but Dophine xp-005 cant cut like original key so i had to reorder just emergency key.
please help me out my teacher
For the skinny lexus and toyota key u need to place a thin shim or metal shim to raise it up a bit... usually for nissan ill cut a mechanical metal key and then duplicate it
On to the emergency key with my Condor XC-009
I have a mini condor xc and I don’t change it for anything!! Has been really good!! Thanks for you review!!
Yess!! Indeed!! Love that machine!!
can you tell me what the small shim is used for and how to use it please
Yes for newer toyota and lexus emergency blade
I've been having trouble with the cutter it keeps falling even though it's secure while cutting a key.What can I do to stop that.Love your videos!
There is a slot where the screw grabs make sure that is face correctly toward screw and screw is nice and tight... you cutter is definitely not centered correctly .
Que tal muy buenos sus vídeo...gracias por compartir.. Pregunto esta usando la broka de corte 2.5mm.. Ya calibrada... Al cambiar a 1.5mm hay que volver a calibrar... Gran saludo y salud familiar
If we just want to change the Blade size,do we have to do this action step by step?
Yes
Oh and how do you find the code for each vehicle on the cutting machine or some kind of guide you use?
Im just familiar with it.. after a while of use youll start being familiar the codes
Hey my friend , is there a book that lists all the coding for all vehicles or any relative information on key coding?
Try looking up the michael haydes locksmith book! Youll like it!
Hola maestro. Creo que tengo un problema con mi máquina xhorse ya se me an quebrado 3 descodificadores de corte. Cuando trato de hacer una copia universal
La copia nunca se hace por universal... se hace bajo de base de datos de vehiculos.. universal es cuando la llave no esta de bajo de base de datos vehículos o si la llave no tiene nombre ...tambien recomiendo que le utilizes el software a la version mas nueva.. y re calibrés todas las manos abcd m2 y m1 ..gracias a ti!
Ya calibre y actualice vamos a ver que pasa con la proxima
@@PEDROESTEBANVALDEZ ai avisa
Me como te fue
I just bought this machine Dolphin xp005. I keep getting probe not detected error. I have made many attempts to calibrate and have changed the probe as well. With no luck. I am not able to get help from anyone. Xhorse support is kind of useless and a waste of time. If you have idea or have seen and resolved this error, Id greatly appreciate your response. By the way love your videos. I have probably watched them all at least 3 times each.
First thing u have to do is height adjustment... also try the electric test .. might not be grounding good..
Have you updated it yet?? You need to download the firmware on your computer
@@MYKEYSAUTOMOTIVE Yes I have updated it to the latest firmware from pc. (did this twice). Its during height adjustment I get the Error 2 no probe detected. I tried the electric test, not sure what result i am supposed to get here. How long is the electric test supposed to take? I left it for about 2 min didnt give me any messages. How do I know if its grounding? Thank you for your time.
Not sure why Mike but I am not able to open the files to update my dolphin XP-005. I bought mine from UHS should I contact UHS support?
Hello Gerry ! dolphin must be updated through a pc! you will need to download two things,xhorse upgrade kit and the dolphin software !!
I think you make outstanding content, I really like this topics and its helping me identify what I need to open a new small business on the side. Great work!!
Yesss !! Glad it helped and thank you for watching!!!
Do you think we have to do a clamp calibration everytime the clamps are exchanged? For example, I keep my machines and gear in portable stackable toolboxes to transport easily, but I keep the clamps off while in storage to avoid the table hitting anything. So you think I have to cal each time I power up since I keep my table empty?
No,you should be good!!
I keep trying to do the height level adjustment like you showed, but an error code : 29 keeps popping up and I can’t get rid of it to do the height level adjustment. Do you know how to fix it? I can’t find any other videos about it.
You could be doing it wrong the .. cutter has to be lower than the probe
Nice Video from Lock Stop and Key!
Thank you sir!! Greetings to Lock Stop and key!!
Hi can i cutting plastic key for Passat cc with dolphin xp005
Oh wow a plastic key ... yes I believe so it's possible!!
Cuando se hace la calibracion de altura, la guia tiene que quedar igual?
Si haci es!
Thanks for showing this!! So dumb question.. Do the key blanks you used come with the machine to use in calibrations?
Funny thing, when I bought my cutter They actually sent me a key blank for hon66
@@MYKEYSAUTOMOTIVE Thats Cool! but should I plan on picking those up myself?
@@geraldskinner63 yes i would consider that!! No guaranteed youll get one in there...
@@geraldskinner63 any high security blade from honda should do (hdo01)
Hi I just got my new XP-005, when You mention the cutting calibration using blank key hon 66, does that blank key come as part of the kit, or is that need to be ordered extra? Cause I don’t see it as a part that came with my XP-005. Thx for your videos!
Came with mine.. ho01 blade will work too
What a timely release of this video!!!! Im planning on gettiing one and my hero youtuber already got his.....keep going bro
Hahaha glad you liked the video!! Blessings!! Take care friend!!
facebook.com/groups/condorxcmini
@@safeshowroom are u the admin of that group?
@@sadiquenur7550 Yes
Does it have to be blank Honda key? I have blank bmw keys.
Yes sir only honda .. high security blade..
Thank you so much man! you are a great teacher.
Thank you for watching!!🙏🏼🙏🏼🙏🏼
My probe keeps braking at clamp calibration stage, I don't know what I'm doing wrong. I've broken 5 of them now. What do you think I'm doing wrong?
Try not to disconnect from bluetooth when cutting a key by code ... also update to the latest software and calibrate adjustment heights and calibrate clamps
Those the pad comes with the machine
I dont have any hon66 blades on hand atm do you know of any other blades that are equivalent in size for the calibration?
No brother !! It has to be a hon66 blade!!
@@MYKEYSAUTOMOTIVE would these universal keydiy blades work?
www.ebay.com/itm/313170621658
I searched hon66 on UHS and this came up. So the ho01 blade isnt the same size? Sorry for all the questions I'm just getting into this. I'm not even sure if this is the blade needed to calibrate yet as I'm waiting for the dolphin xp 007 to come not the 005 lol
www.uhs-hardware.com/products/honda-ho01-high-security-test-blade-10-pack-mtk-ho01-1
@@dwayneshaffer4188 yes ho01 is the same
Please email me thank you
Your going to love this machine!
I already am loving it!! Thank you for watching!!
Is there any cars that you have found that this machine can't do? Im in Europe.
Stuart Ross i would say just the tibbe key
@@MYKEYSAUTOMOTIVE I bought the M3 and M4 jaws, they are still in the post
Stuart Ross niceee!!!👍🏻👍🏻👍🏻you should be set!!
Very nice what happened to the sec e9?
Hey !! The sec-e9 is still good and running!! Wanted to review/try out new machines!!!
@@MYKEYSAUTOMOTIVE which do you like better?
@@rgreviews7982 i like the dolphin xp005 better!!
Cuanto demora en cargarse al 100% la bateria?
Unas 2-3 horas..
@@MYKEYSAUTOMOTIVE creo que ya valí madres, la tuve 10 horas conectada y no cargó al 100% era la primera carga
Hey bro esa puede hacer lo mismo que la condor? Es que no se cual comprar
El condor xc mini???
El condor xc mini est un poco mejor!! Tiene tableta el dolphin no tiene..tienes que connectar a tu telefono o el max key tool!!
MY KEYS AUTOMOTIVE pero hacen lo mismo la que tú compraste con la condor mini?
Cool video. Will this machine be recommended for a beginner like me or should I go with something cheaper? This looks easy to operate!
yes this is a great machine for begginers!!
Thanks for your excellent videos. I'm currently trying to figure out, if the XP-005 meet my requirements. Speaking for HU162T(9) or HU162T(10) I haven't seen any video on YT using this machine (only some single ones with the more expensive Mini). Would be excellent if you're able to show us the possibility of making those two newer ones with the XP-005. Keep up your great work, man!
Thank you sir i will look into that!!
Hi i want to find out im caught in between getting a Dolphin or a Condor mini plus do they have the same capabilities or the Condor has more superior functions
Condor mini plus has more capabilities
I got a key that's already cut what do I do ?
That wont help get a new blank key
Buenas noches , amigos saben por qué en la app no me aparece en la lista opción de corte para llaves (bajaj , pulsar, discover , ktm , TVS ,.... ) Si alguien puede ayudarme a solucionar el esto se lo agradezco mucho es indispensable para mi trabajo.
Hello, friends, you know why the app does not appear in the list of the key cutting option (bajaj, pulsar, discover, ktm, TVS, ...). If someone can help me solve this, I appreciate it very much, it is essential for my job.
Okay.
Thanks my friend
Thank you brother!!🙏🏼❤️❤️
Hi, does this cut normal house keys?
I only reply to memebers .. I apologize..
Buenas tardes amigo, cuánto te cuesta la licencia para el uso de esta maquina , porque acá supuesta mente cuesta 100mil por año esto en México
I still haven’t been able to update mine
I have a video on how to do the update .. you have to download downloading kit ...
11:53 - "Number D" 😂😂😂👍🏻👍🏻
🤣🤣🤣🤣
I was going to say numer 2 clamp but i ended up saying number D!!
@@MYKEYSAUTOMOTIVE In one of your other videos you say "number C" 😂😂
I want to buy this, I’m just starting… I can BARELY afford the og price…
But I feel I need the added 3 year protection…Would you, DID YOU get the added protection???
Should I wait to gather that amount…(my credit is SH*T)
I just got a regular protection everything else like belt and blades and I have replaced my self ran me for about 3 years without an issue then the conveyer belt broke
Thank you!
Thank you!
La compre amigo y gracias por tus vídeos ; SOS lo maximo!
Gracias a ti amigo por el apoyo!!
Yoo thanks again about the brute Force cable info from the other day. 👍👍 I just thought it was ironic I just got this dolphin on Friday lol 3 days ago. Already lovin it! Wish I bought this machine before my last one! Great videos. Keep it up
Hhahah hey peter you got man!! Here to help!! Right!! I love this little cutter!! Really handy and portable!!!thank you take care buddy!!!
Do you think we have to do a clamp calibration everytime the clamps are exchanged? For example, I keep my machines and gear in portable stackable toolboxes to transport easily, but I keep the clamps off while in storage to avoid the table hitting anything. So you think I have to cal each time I power up since I keep my table empty?
Where are you from and what is the rate of this machine?
2000$ usd im from usa
Muchas gracias por esa exelencia que haces en los videos
Gracias a ti amigo por el apoyo!!
Very 😎 good explanation 👏
Amgo do one day Honda Accord push Button 2019 with remote starter thank you
Ok i will brother thank you!! Take care!!
I was going to buy the Keyline 994 but the Dolphin is half the price and it's way more portable.
The dolphin is a nice little key cutter to have around!! Yes it has its own battery pck and really portable!!
Felicitaciones for you new machine the good product for the best programmer
Thank you so much!! God bless you!!
you are the men. keep it up with more videos ;)
Thank you blessings take care!!
السعر
I love how many times you said "ok" 😂🐬🐬🐬
I picked up the habbit from my college professor!! 🤣🤣🤣🤣 he wanted to make sure we were listening so he would always say ok!?
@@MYKEYSAUTOMOTIVE whats is number contac?
Me to :)
THinking about ordering one of these soon. Do you know if a bolt down kit is available? Or are there any trype of anchor points built into the machine?
I shall check tommorw its at my shop!! Email me lilroxx001@yahoo.com!!
How much does this machine cost?
How much dollar 🇺🇸
2k
@@MYKEYSAUTOMOTIVE My friend, I don't understand how much your machine costs
You tell me 2k 2k means how many dollars
@@MYKEYSAUTOMOTIVE good morning
@@engelparvas7066 2,000 usd
@@MYKEYSAUTOMOTIVE thank you so much 🙏my friend ❤♥💕💖
Good job I like you video you real my friend.❤❤❤❤❤❤
Thank sir i appreciate that!
Fantastic informative video , can you tell me what is that tool your using to enter the information ? Does it come with the machine and is it necessary to have for the machine or can you use a phone or iPad ? Thanks let me know..
Its the key tool max I bought seperately very vital for cloning
Okay cool thanks I will look into purchasing a set..
Mine arrived today, what a piece of crap. Something is majorly wrong, during height level adjustment it completely misses the clamp.
Wow did u figure out the issue??
Yeah, it’s on my RUclips channel, supplier just kept fobbing me off so I had to send it to a local repairer here in Australia. It should arrive there today and then I can post the diagnosis.
Hello friends, what about the machine?
Hi friend yes this is a good machine
Ha..ha..oooh…ahhh🤣🤣 very cool 😎
What's a better first key machine to get for new start up business, dolphin or sec-e9?
They are both good... i cant decide!!!
Dolphin
dolphin is nice
@@MYKEYSAUTOMOTIVE
THE DOLPHINS GOT DIFFERENT
SOFTWARE VERSIONS V1.1.8 ,V1.4.0, V1.2.0 AND... SO NOT SURE WHICH ONES ARE BETTER ONE TO BUY AND IS THERE ANY LATEST VERSION ATM?
Amigo yo sigo tus videos pero por favor no se olvide de traducir en castellano , felzidades por salir adelante ,un saludo desde España
Si amigo!! Discúlpame!! Y gracias!!
33 lbs
Thank you for the info sir!! Blessings take care!
Wtf que complicada Esa maquina me la acabo de comprar lol
Ni tanto alrato agaras la maña
Please stop saying you guys
😅😅😅you guys!
Thank you king ! You are the best !!!!
Just bought one today and was recommended by
LOCKSMITH EMPORIUM to watch your videos. I’m so glad he did bro, you’re videos are so informative! Subbed and ready to learn!
Thank you Wulfy enjoy!