Bro man! Dang what an amazing looking pit. I am sure it cooks really well too. Been shopping around looking at videos for weeks since my old backyard is done after 21 years and your pits are the first that truly inspire. God bless and good luck, I might come pay you a visit to discuss a build.
Bro you obviously make the best offsets I’ve seen and I’ve watch nearly all of the diy videos in my quest to build my own. When are you going to drop a build video? I know the channel is new but I can’t wait! 😂 keep up the amazing work
They are nice! Unique as well but a typical tank style. You may not have seen mine. It’s a bit different. Get inspiration anywhere you can! Good luck with yours and post your build. 👍
@pigironpatina where do you source your wagon cart parts?? I don’t have money to pay someone so I’m going to try to build my own, if I can afford even that
Awesome build Kyle! Do you have a website? I would like to know how much this custom build is? You should definitely start making stickers, who wouldn't want a flying pig sticker!
That’s an awesome build. On your zero turn pulling it- I didn’t think those Hydro motors were designed to pull weight like a lawn tractor can. Any issues you experience doing this? I have a zero turn and my pit is 1200 pounds so I was considering doing it.
@@pigironpatina985 would it be possible or should I say that if there was a way to have a stove grate welded on top of the fire box and a circular spot that's not insulated to warm a pot of coffee.
Before long they will be building with engines so you can just drive them wherever you want to take them. Hell im a fabricator maybe ill start building them like that. Whats this thing cost with all that extra stuff on it? Im sure its north of 10k without all that.
@@christopherwashington2334 i dont know if a electric bike motor would pull that thing or not. Looking at 1000- 1500 pounds. But good start on ideas of how to get started.
Awesome looking! But seriously, a simple pivot bar front is all that's needed. Coilovers are actually doing nothing. Blingy "suspension", excellent smoker.
Thanks Bob! But you are incorrect in your assumption they do nothing. What your not thinking about, is uneven terrain. Your simple pivot style will have one tire airborne while the suspension setup will flex and stay on all 4 tires!👍🇺🇲
We build both styles Bob, if you crest a hill a little sideways, or hit a dip with solid front end, one tire goes up and your on 3 wheels. On suspension, they flex down and stay on the ground. Even if the rear is solid. Thanks for commenting!
@@bobschmidt419 Looks to me like the coil overs are on all 4 corners, so they are doing something. A lot in fact. Tractors don't have a suspension for other reasons, mainly, they don't have a frame. It is literally an engine and gearbox with wheels. Any attempt at a suspension would be catastrophic.
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Bro man! Dang what an amazing looking pit. I am sure it cooks really well too. Been shopping around looking at videos for weeks since my old backyard is done after 21 years and your pits are the first that truly inspire. God bless and good luck, I might come pay you a visit to discuss a build.
Sir you are a craftsman, your company will be up there with the best of the best in no time👍
Dude u rocked out on this bad cat pit and the other 1000 chapo. Awesome work friend. Keep rockin bud.
Bro you obviously make the best offsets I’ve seen and I’ve watch nearly all of the diy videos in my quest to build my own. When are you going to drop a build video? I know the channel is new but I can’t wait! 😂 keep up the amazing work
They are nice! Unique as well but a typical tank style. You may not have seen mine. It’s a bit different. Get inspiration anywhere you can! Good luck with yours and post your build. 👍
Slick! Wishing you and your business the best.
What a beautiful piece of equipment to pass on to your customer’s.👍
Beautiful pit!! Excellent craftsmanship 👌👌
My dream smoker! Amazing work as usual man
Gorgeous work my good man.
Awesome looking pit!!!
Love the suspension setup
Just have to say what you build is the RR of pots. Would love one, a man can dream!
Oh man that thing is sweeeeet! Wish i had the kind of money to splurge on a beautiful pit like that.
Absolutely beautiful 😍
Beautiful work
Great smoker but top rack to high add another angle section to lower top rack for different heights 👍 good job
Thank you damiel!! All my smokers are built to order. So you can place them anywhere you like! Racks of ribs are short!👍
That's a Glorious pit!
nice looking pit wish I had seen this before I ordered the pit i got last year
Looks awesome, hoping my build I'm doing, comes out just as cool!
Brilliant. Raising the bar mate
Your pits are incredible
That cart is sick
Very creative! It came out sweet. Where do you get your high temp clear?
Dope pit, would have made the top racks lower to fit more than chicken and ribs!
I put them anywhere you want them!
Супер
Man that's beautiful
Love it. Hope to own one like this one day.
Holy shit, that thing has shocks!! I didn't see where the kick starter was.
🤣🤣🤣 that gives me an idea🤔
@@pigironpatina985 Do it, man!
What's the clearance between the top rack to the top of smoker??
An off-road smoker bad ASS
Bro I need that cart pit wow next level
😮
Are back tires bigger than the front tires?
What material do you use to seal the lids, so the smoke doesn't come out?
I cut my doors with a skillsaw as to not warp them, pre, bend strapping, and I have sufficient draw rom my stacks.
It's not really needed but I add lavalock gasket material for even better seal.
Incredible
Looks good
Nice pit 👍🏼
Did you sand the tank then let it rust a little bit then cle a r it to get that look??
No sir, just a wirewheel on a grinder. Mother nature did that over the years!
@pigironpatina where do you source your wagon cart parts?? I don’t have money to pay someone so I’m going to try to build my own, if I can afford even that
Do you have a cost of the 250 with coil overs?
That is a beauty
Awesome build Kyle! Do you have a website? I would like to know how much this custom build is? You should definitely start making stickers, who wouldn't want a flying pig sticker!
That very nice how much for that
Subscriber no. 860
That’s an awesome build. On your zero turn pulling it- I didn’t think those Hydro motors were designed to pull weight like a lawn tractor can. Any issues you experience doing this? I have a zero turn and my pit is 1200 pounds so I was considering doing it.
Luckily I've had no issues yet! Parker pumps.
Wow
Do the back tires get hot when cooking?
No sir. It's insulated firebox. There is 8" of insulation in there.
@@pigironpatina985 would it be possible or should I say that if there was a way to
have a stove grate welded on top of the fire box and a circular spot that's not insulated to warm a pot of coffee.
How much is something like that sir
Before long they will be building with engines so you can just drive them wherever you want to take them. Hell im a fabricator maybe ill start building them like that. Whats this thing cost with all that extra stuff on it? Im sure its north of 10k without all that.
If someone can take an engine from an electric bike, game changer
@@christopherwashington2334 i dont know if a electric bike motor would pull that thing or not. Looking at 1000- 1500 pounds. But good start on ideas of how to get started.
How much meat can go on 250
I want one! Kind of have my heart set on reverse flow though, can yall do those too?
You mean 14 inch wheels?
🇺🇸👌💪
Beautiful job on that! How much?
8700
@@pigironpatina985 I would have thought more than that. It's a beauty! Nice job!
Can I get u to build a smoke box for a 250 ?
What's the building price??
9k
What’s the price on this?
9k
La caja dañará.ala llanta
she is beautiful
Nice ass pitt. Is that firebox not gonna get so hot it melts those sweet ass tires tho ?
Hey Jim! Thanks man, this box is insulated. Retains all the heat inside!!
Awesome looking! But seriously, a simple pivot bar front is all that's needed. Coilovers are actually doing nothing. Blingy "suspension", excellent smoker.
Thanks Bob! But you are incorrect in your assumption they do nothing. What your not thinking about, is uneven terrain. Your simple pivot style will have one tire airborne while the suspension setup will flex and stay on all 4 tires!👍🇺🇲
@@pigironpatina985 Not if your rear-end is solid mounted. Wasn't assuming anything, just telling you. Look at a tractor.
We build both styles Bob, if you crest a hill a little sideways, or hit a dip with solid front end, one tire goes up and your on 3 wheels. On suspension, they flex down and stay on the ground. Even if the rear is solid. Thanks for commenting!
@@bobschmidt419 Looks to me like the coil overs are on all 4 corners, so they are doing something. A lot in fact. Tractors don't have a suspension for other reasons, mainly, they don't have a frame. It is literally an engine and gearbox with wheels. Any attempt at a suspension would be catastrophic.
How much $$$$$
This is what it looks like when pigs can fly
Firebox gonna melt those tires
Actually, the firebox is fully insulated. You can hold the back of your hand on it without burning.
Can't fit anything on the top grate. Other than that it's perfect
Ribs, sausage, chicken
This guy. Every build is bad***.
yes - please
What is your contact information Brother
Kyle moe 936 648 5006