FOR WHO DOESNT KNOW ABOUT ANYTHING this is the best detailed tutorial about DTF i have ever seen. I appreciate man. You really helped me for learning this procces.
Penjelasan yang amat detail dengan mudah dimengerti sangat2 bermanfaat... ohh ya KO mau tanya yang bahan untuk ganjelan gear depan ukurannya berapa ya? terimakasih sukses terus
Best dtf printing video I've ever seen. Good job Please what is the specific name for the damper used and the height of wedges used to suspend the roller? Eagerly awaiting your response
Mantap bang, penyampaian nya sangat baik dan detail, oh ya bang mau tanya itu printhead klo mesin of/istirahat kira2 kuat brp hari agar printhead amat gk mampet
Hi. If I print the transfer and don't use it right away, should I powder it and cook it, or should I just put it aside until I need it, powder it, and cook it?
Wait about 10 minutes then powder and cook. Don't put it aside too long because the oil in the ink will separate and will go outside of the print side and stick to the powder
Terimakasih bermanfaat sekali bang,cuman mau nanya,itu print head treatment nya klw sudah di pake gimana ya?pengalaman dlu punya print dtg,selalu mampet print head nya,karena basic tinta nya karet,apakah tinta dtf juga sama?kendala nya printhead nya mahal,hampir 1 jt lebih klw udh mampet.
Thank you for your video is the best explained in the web. I have a question: Do you need special software for print? i have mac and use illustrator original version. Thanks
23:22 why would you do that, if not does it affect the print quality? Does it affect the paper pulling? Looking forward to your reply, thank you very much
Hi, great video! But when i want to do nozzle check, first time on normal paper is everything ok. But when i want to load film, there is problem...but not with loading, the film is loaded properly but problem is always with paper jam error...there is always paper led blinking on the printer...When i print a windows printer test page, there is no problem wit loading the film...
@@HobbyPrint Its off in acrorip, but its problem too with nozzle check from windows, not only from acroeip. When i want to print nozzle check from printer driver i have the same problem...i think ita something with paper sensor
What do you think after using it for a full year? Are there problems you encountered with this printer? Is it true that every day the printer head should be cleaned? That's what it says. ?? Do you have a lot of malfunctions??? Do you have to work a lot? Some say that if you do not work for a week, the head is ruined and must be replaced?
Mau tanya, klo roler depan di ganjel, masih berfungsi buat narik pet film nya gak yh klo mau print full A4 pke pet film potongan A4, takutnya ga bisa narik pas cetak gambar di akhirnya malah bleber tinta. Atau opsinya pake pet film rollan?
Kalau diganjal maka sudah engga berfungsi lagi, dan memang engga bisa cetak sampai ujung belakang pet film. Opsi hemat pet film memang harus pakai roll tapi harus pasang vacuum supaya head lebih aman.
![I.N "HALLUCINATION" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/n5B5q1Hwt_U/mqdefault.jpg)
![[EngSub] How To Make Sublimation Printer From Epson Ecotank Printer using Vator Sublimation Ink](/img/1.gif)
FOR WHO DOESNT KNOW ABOUT ANYTHING this is the best detailed tutorial about DTF i have ever seen. I appreciate man. You really helped me for learning this procces.
Thank you
I just need some advice. Pleaseeeeee!! I called the guy I bought the printer from and he says they don’t advice to convert it. Is this true??😢
Selamat atas video Anda. Di sini, di Brasil, kami masih belum menemukan banyak hal tentang DTF ini
thank you
Akhirnya setelah sekian lama. .bisa lihat lagi pak julius pakai sarung tangan hitam kebanggan 😊😊😍😍
Siap Om, terima kasih 😁🙏
Terima kasih share video ni bro... Sangat2 membantu kami yg baru belajar berkenaan DTF
Siap, sama-sama
Terima kasih atas tunjuk ajarnya. Belum nak convert lagi ke DTF cuma ada masalah pizza roller. Mungkin akan convert ke DTF selepas dapat printer baru
@@ayadhazimi sama-sama Pak, sukses selalu
wah... ini modification yg paling mudah dan simple utk dtf printer... terima kasih byk2 yaaa
Siap, sama-sama
Terimakasih Om sudah berbagi ilmu. Sehat & Sukses selalu. Aamiin 🤲🏻
Siap, sama-sama, sehat selalu dan sukses selalu 🙏
Keren Bingits Om, Penjelasan Sangat Detail & Jelas. Thank's info nya 🙏
Siap, sama-sama
@@HobbyPrint kalo pesan langsung sama mas, biayanya berapa 👍
sangat membantu untuk yg ingin modif sendiri.. bermanfaat sukses terus bang
Siap, terima kasih
ruclips.net/video/YVPCVaV2bg0/видео.html
Terima kasih ya mas..salam sablon dr Kuching Sarawak Malaysia
terima kasih, salam sablon
Bsa pesan printerx pak, tpi sudah dinstal dan siap pakai...sekalian dg paket komplit untuk usaha sablon
Info lebih lanjut bisa hubungi kami di WA 087895095000
mantaaaaap... rinci jelas... top markotop we lah
terima kasih
Penjelasan yang amat detail dengan mudah dimengerti sangat2 bermanfaat...
ohh ya KO mau tanya yang bahan untuk ganjelan gear depan ukurannya berapa ya? terimakasih sukses terus
ruclips.net/video/luCZPd6mFjw/видео.html
Ijin praktekan ilmunya om. Smoga berhasil
siap, sukses selalu
untuk mempermudah listrik putus-sambung tidak perlu cabut kabel power, gunakan saja stop kontak yang ada saklarnya 🙏
Setuju Pak
Thank you, thank you and thank you. This is like the most comprehensive video online. Thank you
you are welcome
the best tutorial ive seen thankfully it has subtitle so i can understand it thank you so much !
You are welcome
Thanks for everything, now you are my friend, I am from Bolivia sud América, thanks, anda have a good day
thank you
Best dtf printing video I've ever seen. Good job
Please what is the specific name for the damper used and the height of wedges used to suspend the roller? Eagerly awaiting your response
Height = 3,6 cm
Sangat bermanfaat untuk pemula seperti saya mas. Terima kasih
Terima kasih Pak
Akhirnya sarung tangan Hitam Muncul lagi 😁👍👍
Siap Pak 😊🙏
terimakasih tutorialnya. sukses selalu
Baik, sama-sama, sukses selalu
sangat bermanfaat. terimakasih ilmunya, salam dari subsriber baru 🙏
Siap, sama-sama
Muantav BozQ sangat sangat membantu
Siap, terima kasih
ilmu yang berguna
Terima kasih
Mantap bang, penyampaian nya sangat baik dan detail, oh ya bang mau tanya itu printhead klo mesin of/istirahat kira2 kuat brp hari agar printhead amat gk mampet
@@paketjajanidn sebaiknya setiap hari ada pemakaian dan ruangan harus adem
Great video. Just have one question. I cant print a full a4 page, it start messing the print by the end of the page.
keren om sarung tanganx..
Siap, terima kasih Pak 😁🙏
Best video .. well explained with subtitles ✨
thank you
Yg di tunggu2 thx u om
Siap, sama-sama
Sama Halnya Dengan Sablon Sublim, Printer Biasa Epson L120 Bisa Pake Sablon Kaos Partai (Pemilu)
i did convert my l805...never change the damper..
very helpful and easy to understand will order mine soon
Nice, hope you will succeed
Mantap om, clear n easy
Siap, terima kasih
ruclips.net/video/YVPCVaV2bg0/видео.html
Terimakasih banyak ok 🙏🙏🖐️
Sangat membatu
Baik, sama-sama
Great video, you change the damper, what is the damper you used, I serch in Amazon and there are lots of damper.
Epson L1800 ecosolvent dampers
Selama ini semua kontennya saya ikuti, sangat profesional, Om ada link pembelian atau kontak yg bisa di hubungi 🙏
Terima kasih, bisa hubungi kami di nomor telepon 087895095000
bahas modif print UV dtf dong mas
Siap
mantul ini pak...
terima kasih
Bikin tutorial Modif L800 untuk DTF UV om
Siap
Best dtf printing video!!
thank you
Hi friend, Where did you get new dampers that you installed?
mantap sangat membantu...
Siap, terima kasih
Ternyata rumit juga. Saya pikir cuma ganti tinta saja.
Super interesting tutorial, but could you please tell me what is name of those 2 woods you put to hold the gear up?
Just 5mm thick plastik board
Forex sheet cut piece
mantab pak...
Siap, terima kasih Pak
Apakah bisa pesan printernya yg sudah siap pakai (sudah d modif spt d viedo)?
@@biar_kayak_orang2 kalau model L805 kami tidak jual, bisa kunjungi website kami www.printgazer.com untuk model lainnya
Good tutorial bro. Just wondering, either is it possible to print color on the white ink? Example like printing transparent sticker.
Yes it can with proper settings, but we must use inkjet coated sticker , not regular ecosolvent or laser sticker
@@HobbyPrint awesome bro. Thanks for the info
Hi. If I print the transfer and don't use it right away, should I powder it and cook it, or should I just put it aside until I need it, powder it, and cook it?
Wait about 10 minutes then powder and cook.
Don't put it aside too long because the oil in the ink will separate and will go outside of the print side and stick to the powder
Thanks, great video!
thank you
Terimakasih bermanfaat sekali bang,cuman mau nanya,itu print head treatment nya klw sudah di pake gimana ya?pengalaman dlu punya print dtg,selalu mampet print
head nya,karena basic tinta nya karet,apakah tinta dtf juga sama?kendala nya printhead nya mahal,hampir 1 jt lebih klw udh mampet.
perawatan mirip printer dtg , lakukan perawatan harian sebelum dan sesudah cetak
Bro thank you for this video its help me a lot but my problem is Software to use 😢😢😢
my i get that?
bisakah menempel di media selain kaos. misalnya di kayu atow di akrilik
Bisa Pak, habis itu dilapisi clear coat supaya lebih tahan gesek
Thank you for your video is the best explained in the web. I have a question: Do you need special software for print? i have mac and use illustrator original version. Thanks
We use Acrorip 903 software to print
@@HobbyPrint
Noufou DAKUYO
il y a 0 seconde
Hello ! Please , tell me what is the size of the syringe ?
makasih videonya bang... kalau udah modif begitu berapa harganya berapa bang...
info lebih lanjut bisa hubungi kami di WA 087895095000
For this we don't need to use Moisturizing fluid ?
Yes you need it for daily maintenance
23:22 why would you do that, if not does it affect the print quality? Does it affect the paper pulling?
Looking forward to your reply, thank you very much
It will effect the print result, because the front gear will make gear mark on the print surface
@@HobbyPrint what is the hight of the little piece of pvc
شكرا.على المعلومات الرائعة
you are welcome
thank you very much friend
you are welcome
Bang kalau pake print bekas tinta original kalau mau ubah ke dtf apa saja yg di ganti bang?
great video, what is the approximate price for the paper you are using?
About USD 0.3 / sheet A4
Riecat dtf review plz!
Ok
Terima kasih Om Julius berbagi ilmux..... Easy modifikasi.... Printernya A3 om ?
L805 = A4
Bermanfaat...
Siap, terima kasih
what program did you load into the printer that it worked with white color?
Acrorip
Hi, great video! But when i want to do nozzle check, first time on normal paper is everything ok. But when i want to load film, there is problem...but not with loading, the film is loaded properly but problem is always with paper jam error...there is always paper led blinking on the printer...When i print a windows printer test page, there is no problem wit loading the film...
Make sure in acrorip, tab printer, check paper size = off
@@HobbyPrint Its off in acrorip, but its problem too with nozzle check from windows, not only from acroeip. When i want to print nozzle check from printer driver i have the same problem...i think ita something with paper sensor
Kindly share the size of spacers.
You used to lift the rollers??
3.7cm height
Great sir
Thank you
Sir How I am purchase this machine. I am live in Pakistan
Sir Please guide me about this machine
@@qaisarprince6674 you can buy original Epson L805 from computer store and modified it yourself like this video
Please what was the settings for the whole A4 page?
Hello, can you upload the ICC Profile for epson l805. thanks
Email to support@hobby-print.com
Awesome
Thank you
What do you think after using it for a full year? Are there problems you encountered with this printer? Is it true that every day the printer head should be cleaned? That's what it says. ?? Do you have a lot of malfunctions??? Do you have to work a lot? Some say that if you do not work for a week, the head is ruined and must be replaced?
Itu pake cadried bawaan bang
where did u get acro rip?
nice video can i ask what's the height dimension of the tray that you used for your printer thanks
ruclips.net/video/luCZPd6mFjw/видео.html
om, dapetin icc untuk L805 vator cranya gmn, so sya jg pelanggan Hobbyprint ditokped
Bisa email ke support@hobby-print.com
Bang 100ml bisa untuk berapa kali cetak
bang kalau PRINTER epson L 850 boleh gk di buat jd printer DTG
Kreatif
Siap, terima kasih
Mau tanya, klo roler depan di ganjel, masih berfungsi buat narik pet film nya gak yh klo mau print full A4 pke pet film potongan A4, takutnya ga bisa narik pas cetak gambar di akhirnya malah bleber tinta. Atau opsinya pake pet film rollan?
Kalau diganjal maka sudah engga berfungsi lagi, dan memang engga bisa cetak sampai ujung belakang pet film.
Opsi hemat pet film memang harus pakai roll tapi harus pasang vacuum supaya head lebih aman.
@@HobbyPrint siap, terimakasih infonya
Ini bisa juga menggunakan transfer paper yah bang buat sablon dst
Bisa juga
Bedanya DTF , sublim , Pigment, dan Artpapper apa bos ?
How to print continues using L805?
Mantap tutorialnya 👍👍👍... Btw mau tanya mas klo printer sy sudah ada isi tinta original bawaan epson harus dikuras dl ya?
iya harus kuras dulu
do we need to flush it everyday my printer when the work is done and the next day always having a problem to print so how to maintain.......
Make sure the room temperature always stable at 25'c
Thank you.
@@reubenzulu744 you are welcome
Om apakah bisa printer L1300 MODIF DTF
boleh tanya bang,, itu buat ganjel gear depan nya pake apa ya,, ? trmksih..
Pakai potongan acrylic
Om beli damper yg filter stainless nya dimana?
tokopedia.link/kRD8VODDJxb
TX, VERY NICE !
thank you
Minta software partnerrip RIP Pro (white) for flatbed printer ver 9.03 donk ...
Demper yg seperti itu belinya di. Mana bang dan apa nama dempernyq
tokopedia.link/kHmIzPa5rtb
the white dtf color do not damage the head?
need good care and maintenance
Can I be using the damper that came with the printer pending the time I would buy the ecosolvent damper and then change them?
Yes you can
Excellent video bro.
Could you share the dimensions of the pvc output tray?
Thanks
ruclips.net/video/luCZPd6mFjw/видео.html
Seting gambar mau print pake apk apa om?
Pake kertas Pet lain bisa nggak bang? Selain punya vator
Привет друг. Цветовой профиль нужен на l805
Hi! very nice video. please tell how to install 3rd party color icc profile in Acrorip.
email to support@hobby-print.com
@@HobbyPrint thanks
apa ada yang dijual siap pakai pak