To be fair its never going to lift off from a roll without breaking the nose gear or just keeps it planted on the ground without enough elevator authority
That glue will not hold up with that weight. Drill a few holes and tip tie it down as well. There's a spar in the wing and that's the strongest part of the wing. Run the zip ties through the foam and around the spar. Then I think this idea will work! Good luck from a fellow rc jet flyer!
I'd be surprised if it makes it off the ground. Even if it does, the thrust will make it instantly do an inside loop .... there won't be enough airspeed for elevons to function properly. I see a complete failure.
100%. Also the structure they built to hold the turbine is facing the wrong way. Bringing the turbines weight much to far forward. It will just push the nose down immediately. If they flipped the two supporting beams so it sat more behind the wings than in front of them it would function alot better. You can tell no one there actually has any understanding of physics or engineering. Most of the stuff they do is just buy parts from places and pay to have someone help install them
He better take off with the jet at half power. That's all he'll need. But if he goes full power with that thing there will be a HUGE nose-down push and I bet he won't get it off the ground.
Call me crazy but they should buy a remote control aircraft carrier. *eats steak whilst contemplating putting a jet engine on the air craft carrier* instead of a boat b2, how about a flying aircraft carrier 🤣
I think one of the funniest parts about Cleetus vids is how every time they have some crazy device, a jet, or some extremely loud car that just destroys Cleeters mic for however long the run the thing. Literally sounded like phasers going off when the throttle blipped on the jet.
Someone or something is going to get hurt. Everyone standing around the engine running at 145,000 rpm ...yikes. why did you bolt the engine to the aluminum mounts, then used foam tak to glue a 13lbs thrust jet engine to a foam airplane. Good luck
Oh boy - the CG/CP is going to test those flaperons authority and the fight computer is going to Yeet itself. Also the thrust is no longer in line with center mass, she’s gonna wanna nose dive under full thrust 😂 stoked to see it!
Right, that mount is way high, there's a significant turning moment from the force applied so far above the original thrust line. But maybe it will work, I've been surprised before.
What makes this so wholesome is that Cleetus got the bomber as a gift from the crew and he couldnt even come close to guessing it because he didnt expect them to get him something related to a hobby he has outside of the channel. Its fucking beautiful to see and the way Garrett runs his business gives me hope for the future that we can all share the wealth and all stay loyal to our friends who helped us on the come up.
Imagine if this Styrofoam b2 was actually built more like a titanium b2 and was built to withstand war. Could deliver packages with it. Or armor it up like a micro ac130. Or build them on a micro aircraft carrier and use them to patrol for people lost at sea. Imagine deploying a micro areal refueling tanker. This would be peak rc technology. They already have drones doing nighttime acrobatics so I cant be crazy for saying this.
"Just a little nose heavy" .... with the center of thrust that high its going to nose dive faster than george can put the blazer on its back bumper. cant wait to see it
It would probably be a good idea to drill a couple of holes through the jet mounts and run some tig rod through to the bottom to add a little bit more load spreading
This is the content we collectively need, as fans with limited budgets. Hobby related shenanigans bring out the kids in all of us and are much easier to replicate without building $100k drag cars. Kudos to the team, this will be EPIC! ********* (Must play the TopGun theme song upon the maiden flight!!!!!!) *********
I don't know how much Ty makes but he needs a raise. He keeps the entire company running in terms of safety AND legality. Then you ask him to do these other tasks, and he does track mods. I forget the other person's name (fault of you not talking about your main crew) but he is in the same boat. A driver without their crew is useless. Been proven hundreds of times. I watch your videos a bunch and I still haven't remember your crew besides the drivers and Sam (who has his own line of funding to the shop)
Just love the way Tye says I'll have it maybe 7 minutes the comes back with a perfectly fabbed bracket. Can't wait to see this thing lift off, if it does 😂😂
8:59 Jackstand has the words of wisdom for all time-"Let's just slowly replace all these cars with RC cars" BTW, I've never seen a jet engine mounted forward of something that can melt.
Holy ballz...this channel just keeps giving things i did not even know i needed. Good folks. GREAT mechanics. Super cool cars , fast cars, boats, great people and then suddenly INSANE jet powered madness on anything that can move, fly , roll or yeah
The fact that the jet will break away from the B2 may actually save the B2 to fly another day. Because if they attached it correctly, it would probably end up destroying the plane when it inevitably endos into the ground.
@@jdboyd1861 this reminds me of the Urban Tale of the guy who mounted a JATO rocket to the roof of his car in the desert and it took flight... I to a mountain side
What could go wrong? I used to fly a lot of RC and FPV with Matt. Ask him about the fires. He's an amazing pilot. I need to get you and the crew out for Paramotor tandem rides.
@@mariohnyc if it does make it down in 1 piece I doubt it survives. Gonna be a "the good news is we're landing, the bad news is we're crash landing" situation.
pretty sure the liquid moving around in the empty bottle could give you some issues down the line... as it accelerates to take off all of the fuel will move to the back of the tank and shift the center of gravity. I think The smaller fuel tank might decrease the effects of the fuel sloshing around but certainly will run out quicker. I have no idea what I'm actually talking about though. more of a guess.
@@mattsrcking Matt, r u the guy who sold him the turbine? If so, I thought that was very stand up of you to correct Cletus on the price from new to used. You could’ve gotten probably the new amount because Cletus really wanted it and at that moment probably was none the wiser. I was very impressed by that and that says a lot about your character! Well done!
@@ET-Rex thank you very much for saying that. I treated him like I would treat anyone else buying something from me. He’s a super nice guy, and it was so much fun meeting him and the guys. He is just like he is on videos! Thank you very much for your kind words!
McFarland Aviation at it again!! Can't wait to see this thing take flight. I can't think of a single thing that can go wrong. It's inevitable. It's going to be a resounding success. I mean, we're dealing with professionals here.
Best thing about so much rc plane content is that we’re gonna have either some massive car success content coming soon or some massive car carnage content coming soon!
It’s all about the wing loading. It’s a foam plane. You start cranking and banking and your going to fold the wings up. Look forward to the rest of the video to see what happens. Curious though, do you have your ama turbine rating??
@@SCOOPFREE nope. RC aircraft is governed mainly by the ama but in the last few years the faa has stepped in , in regards to drones. But ama requires you to have a turbine rating if your going to fly turbines anywhere other than his own property if I recall. I haven’t renewed my turbine rating for several years now
@@zachhoefs9543 wrong. The ama governs rc and RC turbines. His faa ratings means diddly. I was just curious if he was an ama member which also means it would be insured for any damages so long as he abides by their rules which right off the bat requires he have the turbine rating I was inquiring about. And although I am a glow boy when it comes to my 3D helicopters, I also have a ama turbine rating
This is the MOST American 🇺🇸 channel! You guys are insane and it’s freaking awesome to watch. Easily my favorite channel to watch when I’m covered in grease, eating a Chili Dog, and drinking a beer. Keep going 100% guys!!🤘🏼🤘🏼
from what i see, the b2 rc is going to spin and whirl out of control when the jets are on.... hahahaha good luck , next episode its gonna be the final one with the jet engine xD
Cleet, you need to get that thrust centered up... NEEDS ANOTHER ONE MOUNTED ON THE BOTTOM, BUD! MOAR POWUH! Mount it on the bottom, then run dowels through the plane connecting the two mounts, and literally sammich the airframe. As she sits, that thing is going nose-down under thrust, 100,000%. He just built a GREAT guided incendiary device, though! 🤣
Hearing a jet spool up is always a head mess because the thing just keeps getting faster and, when you think it's going hard, he says it's just warmed up and gives it throttle. Insane.
Please put some bolts through the mount - I can;t help thinking it's going to rip the mounts off at some point. There is also quite a distance between the centre of gravity and the centre of thrust, which will make the aircraft pitch nose down. Good luck! The melted tail should be fine - the jet mounts will provide the stabilisation that thing *used* to give. Can't wait to see this thing fly.
Cleetus!! You should have put bolts through it, with a bracket on the other side. That way it would it be way more sturdy than glue, and it would be much easier to service and change if you ever change design
I think it is going to fly. I'd use a smaller Lighter fuel bottle , 8 Oz. Less wind drag. Or it's going to turn right on takeoff . It's going to need more runway to lift off & land. Better put glue on landing gears. How about 2 jets to replace both in wing motors. Replace rear tail fun with metal.
Well the motor is going to fly beautifully, but if you don’t screw those mounts in properly it won’t be taking the plane with it. This is going to be fun!!💥
Brother try to test it before her maiden flight. Don’t get me wrong I really hope she stays put but I don’t think it’s gona stay on. I was watching how fast those planes with those turbines fly and I was absolutely amazed!!! I couldnt believe how fast they are, they sound like they are a real jet breaking the sound barrier 😳 I’ll be speechless if the turbines and those brackets stay put ! I really hope they stay glued down man!! Best of luck bro !!!!
Everyone pray this glue really sets in tonight lol
It's mint... it'll be fine
Have you ever thought about a wheelie competition on dirt bikes or pit bikes around the race track??
Praying..
Prayers
Fingers crossed! You the man!
We need a rc version of mullet with a turbine in it like he was originally meant to be
The rocket elco... Man, that was a LONG time ago
Actually: YES!
I 1,000% agree
Yes.
OMG yes !!!!
That was a stand up guy! You told him you’d give him $1500 and he was like no I only want $900 for it.. not many people would have done that..
Exactly what I thought… 👊🏼
He’s the kind of guy to break a tool and blame himself for misusing it.
Wouldn’t even think about returning it.
Solid dude.
I definitely would have taken the 1500
@@kevinmenard6792 felt
Came here just to look for this comment
its gonna violently pitch nose down when too much throttle is applied. Don't forget to bring the fire extinguisher lmao
To be fair its never going to lift off from a roll without breaking the nose gear or just keeps it planted on the ground without enough elevator authority
Most aircraft pitch nose up when speed is increased. Why would this be different? Regards.
clet and crew listen to peter!!! he knows what he is doing
@@michealbeethoven3868 not nearly enough elevator for the weight. The engine angle is also going to push the nose down.
Searched comments specifically to see if anyone tagged Peter. Delighted to see he's already commented.
At 11:12 the look of pure panic on cleets face is just priceless. Its moments like that is the reason I love watching this channel.
I really didn't expect this much content from a remote control plane but I love every second of it.
That glue will not hold up with that weight. Drill a few holes and tip tie it down as well. There's a spar in the wing and that's the strongest part of the wing. Run the zip ties through the foam and around the spar. Then I think this idea will work! Good luck from a fellow rc jet flyer!
that's what I was thinking, it's gonna turn into an unintentional $1000 missile
^^^^^ EXACTLY ^^^^^
I thought “tip tie” was a rc airplane term until I kept reading. I’m an “idiot”.
I'd be surprised if it makes it off the ground. Even if it does, the thrust will make it instantly do an inside loop .... there won't be enough airspeed for elevons to function properly. I see a complete failure.
100%. Also the structure they built to hold the turbine is facing the wrong way. Bringing the turbines weight much to far forward. It will just push the nose down immediately. If they flipped the two supporting beams so it sat more behind the wings than in front of them it would function alot better. You can tell no one there actually has any understanding of physics or engineering. Most of the stuff they do is just buy parts from places and pay to have someone help install them
This may not end well, but it’s going to end spectacularly and hilariously.
Either way it goes, it's going to be amazing 🤣
Yea, why glue? 😂 use fasteners and washers, even on Styrofoam, atleast you're spreading the weight
He better take off with the jet at half power. That's all he'll need. But if he goes full power with that thing there will be a HUGE nose-down push and I bet he won't get it off the ground.
I love how Top Gear a lot of this stuff feels. This is the kind of silly fun I can't get enough of.
Ive thought this! I think they noticed the (old school) Top Gear model worked. Mates having a laugh doing stuff we all want to do.
CLARKSON!!!
@@AudioFreqx CLEETUS!!!
@@projectdelta50 ya have to love Garret and the funs
Cleetus is going to be the Dad with the coolest toys.
He already is
Unfortunately when you grow up with all that stuff you don't appreciate it as much. Still cool tho.
@@EeyoreChilling maybe you don't but doesn't mean his son won't.. Garret grew up up normal class he's gunna make his kid work for it I guarantee it...
Those tend to be the dads who never let you play with their toys. Lol
@@EeyoreChilling this was a topic on the Roman Atwood podcast. Cletus said he doesn’t want his son to be that way.
what a nice gentleman cleetus would of easily paid 1500 for this and he was like oh yeah thats new price ill sell you this one for 900. That's respect
I bet he still gave him 1000
Call me crazy but they should buy a remote control aircraft carrier. *eats steak whilst contemplating putting a jet engine on the air craft carrier* instead of a boat b2, how about a flying aircraft carrier 🤣
That's why he said I'll take 2 then.
…..and now you know why Leroy can’t run 6s…..😉
@@earlrichardson385 He's researching jet technology. He will get there soon. 🤣🤣
Damn Cleet leaving us with blue balls with no test flight lol. Can't wait to see this rig in the air
Right
That ain't making it in the air longer than 2 seconds before the engine rips off that styrofoam
My thought's exactly. Kinda lame IMO.
I literally just commented the same thing without seeing yours =D
CLICKBAIT🤣
I think one of the funniest parts about Cleetus vids is how every time they have some crazy device, a jet, or some extremely loud car that just destroys Cleeters mic for however long the run the thing. Literally sounded like phasers going off when the throttle blipped on the jet.
The sheer panic in cleetus voice when it was firing up after glueing was epic lol
He definitely sounded worried lol
Was really fun being part of this!!
Can’t wait to see this thing fly!!
Matt
:*
Fly? You really expect it to fly? Not a snowballs chance…
Someone or something is going to get hurt. Everyone standing around the engine running at 145,000 rpm ...yikes. why did you bolt the engine to the aluminum mounts, then used foam tak to glue a 13lbs thrust jet engine to a foam airplane. Good luck
Guy with no name was wrong :)
Oh boy - the CG/CP is going to test those flaperons authority and the fight computer is going to Yeet itself. Also the thrust is no longer in line with center mass, she’s gonna wanna nose dive under full thrust 😂 stoked to see it!
Right, that mount is way high, there's a significant turning moment from the force applied so far above the original thrust line. But maybe it will work, I've been surprised before.
@@cageordie my thoughts too - but I love the content! Design through iteration and destruction is the Cleeter way!
I’m an engineer I thought this through already it’s good
@@CleetusM 🤣
@@CleetusMh well in that case fire me up.
Hearing Cletus say “it turned out perfect!” Gave me step brother vibes hahaha. Thanks for the best random content you could ever ask for.
I need that mini jet engine holy
Crap
11:40 How they have to shout "We don't need that where we're going!" Over the crescendo of the thruster. Priceless!
Ol Cleet out here doing gods work pushing the limits in design and technology for remote aviation! Yea boyyy
1st but slow typer! Those tiny jets sound amazing!
you should get one
Never thought I'd see you here lol
@@MakoFPV tempted, but wont last 5 minutes!
@@KevinTalbotTV thats the fun part about it
😂 love seeing you over here Kevin ❤
What makes this so wholesome is that Cleetus got the bomber as a gift from the crew and he couldnt even come close to guessing it because he didnt expect them to get him something related to a hobby he has outside of the channel. Its fucking beautiful to see and the way Garrett runs his business gives me hope for the future that we can all share the wealth and all stay loyal to our friends who helped us on the come up.
Used to be a hobby outside of his channel...
Imagine if this Styrofoam b2 was actually built more like a titanium b2 and was built to withstand war. Could deliver packages with it. Or armor it up like a micro ac130. Or build them on a micro aircraft carrier and use them to patrol for people lost at sea. Imagine deploying a micro areal refueling tanker. This would be peak rc technology. They already have drones doing nighttime acrobatics so I cant be crazy for saying this.
him driving an rc boat used to be the oldest vid on the channel . he's just going back to his roots
*CLEETUS PLEASE FLY AT THE FREEDOM FACTORY* sorry to yell, but it would be so damn awesome to see that thing doing laps!!
11:58 is priceless. All of them scared, in awe, excited, curious, and confident at the same time 😂
And the smiles.
11:58 Everybody grinning from ear to ear and knowingly nodding to each other - such a great moment
I didn't know that Garret has such passion for rc models,but i freaking love it.
Life is good as long as you still have living child inside of you.
The sound of the little turbine is insane!!!! So sweet to see!!
Keep the RC content mixed in! Nice change of pace and fun to watch
As a fellow aviation and RC enthusiast, enjoying all the additional content
Got more toys at 50 than i had as a kid.
I wish he would do content on his helicopter
11:05 Mark on the calendar. First time I've seen Cleet panic 🤣🤣
"Just a little nose heavy" .... with the center of thrust that high its going to nose dive faster than george can put the blazer on its back bumper. cant wait to see it
The screaming of "WE DON'T NEED THAT WHERE WE'RE GOING" as the rear rudder melted had me rolling💀😂
Very true because it's just gonna rip off the styrofoam on the ground
It would probably be a good idea to drill a couple of holes through the jet mounts and run some tig rod through to the bottom to add a little bit more load spreading
This is the content we collectively need, as fans with limited budgets.
Hobby related shenanigans bring out the kids in all of us and are much easier to replicate without building $100k drag cars.
Kudos to the team, this will be EPIC!
*********
(Must play the TopGun theme song upon the maiden flight!!!!!!)
*********
Speak for yourself my budget is unlimited !!!
I don't know how much Ty makes but he needs a raise. He keeps the entire company running in terms of safety AND legality. Then you ask him to do these other tasks, and he does track mods. I forget the other person's name (fault of you not talking about your main crew) but he is in the same boat.
A driver without their crew is useless. Been proven hundreds of times. I watch your videos a bunch and I still haven't remember your crew besides the drivers and Sam (who has his own line of funding to the shop)
Just love the way Tye says I'll have it maybe 7 minutes the comes back with a perfectly fabbed bracket. Can't wait to see this thing lift off, if it does
😂😂
Tye is a *beast.* Love seeing the stuff he makes.
When Cleetus is scared or nervous from something, you know it is some real shotty stuff going on but he still powers on
This is seriously the greatest RUclips channel ever. The Mountain Dew fuel tank has me rolling 😂
8:59 Jackstand has the words of wisdom for all time-"Let's just slowly replace all these cars with RC cars" BTW, I've never seen a jet engine mounted forward of something that can melt.
That was pretty awesome!
Holy ballz...this channel just keeps giving things i did not even know i needed. Good folks. GREAT mechanics. Super cool cars , fast cars, boats, great people and then suddenly INSANE jet powered madness on anything that can move, fly , roll or yeah
I feel the B2 and the jet are going to part ways in epic fashion…. A replacement B2 already in the mail??? 😂 cant wait to see its maiden flight!!
The fact that the jet will break away from the B2 may actually save the B2 to fly another day. Because if they attached it correctly, it would probably end up destroying the plane when it inevitably endos into the ground.
@@jdboyd1861 this reminds me of the Urban Tale of the guy who mounted a JATO rocket to the roof of his car in the desert and it took flight... I to a mountain side
@@jeepnutscotty Does this Urban bro have a youtube channel? Sounds like my kind of people!
What could go wrong? I used to fly a lot of RC and FPV with Matt. Ask him about the fires. He's an amazing pilot. I need to get you and the crew out for Paramotor tandem rides.
We sure did have some fun!!! Lol
Good times brother
🏁🏁 ✈️I believe I can fly…I believe I can touch the sky …I think about it every night and day ..spread my wings and fly away 😂 ✈️
Cleetus adding the jet tank on then bomber is badass
12:02 that slow nod was so funny! “Yep this is gona be awesome”
I love this channel because of the positivity, creativeness, comrodery, entertainment, and how SKETCHY something turn out. Lol
Just don't watch it for the physics lessons. And Let er rip!
this is going to end badly I think!! Time to watch and see if it happens the way I think lol
I'm thinking where the thrust point is located she going to nosedive HARD when the jet kicks in
i'm hoping they'll at least get it in the air....don't think it's coming back down in 1 piece, lol.
@@mariohnyc if it does make it down in 1 piece I doubt it survives. Gonna be a "the good news is we're landing, the bad news is we're crash landing" situation.
pretty sure the liquid moving around in the empty bottle could give you some issues down the line... as it accelerates to take off all of the fuel will move to the back of the tank and shift the center of gravity. I think The smaller fuel tank might decrease the effects of the fuel sloshing around but certainly will run out quicker. I have no idea what I'm actually talking about though. more of a guess.
Or add baffles to prevent sloshing
the second tank is a sump tank to prevent it from running dry
Nope you’re right it’s called the free surface effect
ABSOLUTELY----> OUTSTANDING!!!!!!!!!!. 🙂
1 burnin', 2 turnin'! Out-bloody-standing!!
Matt is one of the best RC pilots ever, and the nicest gentleman.
Hey thanks Jon!! That means a lot!!
@@mattsrcking Matt, r u the guy who sold him the turbine? If so, I thought that was very stand up of you to correct Cletus on the price from new to used. You could’ve gotten probably the new amount because Cletus really wanted it and at that moment probably was none the wiser. I was very impressed by that and that says a lot about your character! Well done!
@@ET-Rex thank you very much for saying that. I treated him like I would treat anyone else buying something from me. He’s a super nice guy, and it was so much fun meeting him and the guys. He is just like he is on videos!
Thank you very much for your kind words!
Loving these rc videos lately dude 👌
I won’t lie that turbine sounds terrifying
As a RC turbine jet pilot I tell you this dude is crazy! It looks for a 1 or 2 times use OK. Let's see how it goes...
It’s the head nod for me 😂😂😂 @12:02
McFarland Aviation at it again!! Can't wait to see this thing take flight. I can't think of a single thing that can go wrong. It's inevitable. It's going to be a resounding success. I mean, we're dealing with professionals here.
The noise that freaking jet engine makes is UN-FREAKING REAL 😂 I absolutely LOVE IT
I love hearing the cameras try to deal with the sounds.
I think we need the twin dew bottle mod on there next😂 for those extra long rips
You all could video the guys doing laundry and I still would watch it and enjoy it. I love this channel
Best thing about so much rc plane content is that we’re gonna have either some massive car success content coming soon or some massive car carnage content coming soon!
Straight god mode with the jet content love it. It’s either going to go two ways 50/50 someone in Jaypan ends up with this sweet ass jet B2😂
Just remember that the thrust of the jet engine will make the plane pitch down because it is mounted above the center line of the plane.
Exactly what I was thinking. It’s gonna flip forward
It’s all about the wing loading. It’s a foam plane. You start cranking and banking and your going to fold the wings up. Look forward to the rest of the video to see what happens. Curious though, do you have your ama turbine rating??
Sounds like a question a Glow Boy would ask...
That being said, he DOES own and fly an actual turbine helicopter...
I would think his helicopter and fixed wing multi engine licenses would cover the RC hobby plane.
@@SCOOPFREE nope. RC aircraft is governed mainly by the ama but in the last few years the faa has stepped in , in regards to drones. But ama requires you to have a turbine rating if your going to fly turbines anywhere other than his own property if I recall. I haven’t renewed my turbine rating for several years now
@@zachhoefs9543 wrong. The ama governs rc and RC turbines. His faa ratings means diddly. I was just curious if he was an ama member which also means it would be insured for any damages so long as he abides by their rules which right off the bat requires he have the turbine rating I was inquiring about.
And although I am a glow boy when it comes to my 3D helicopters, I also have a ama turbine rating
Never thought I'd like rc jet content so much
Nice! The first “Hybrid “ B2! 😆🙏❤️😎🤙
This is the MOST American 🇺🇸 channel! You guys are insane and it’s freaking awesome to watch. Easily my favorite channel to watch when I’m covered in grease, eating a Chili Dog, and drinking a beer.
Keep going 100% guys!!🤘🏼🤘🏼
Most American comment😂😂💯
Whether it flies or fails, it will be spectacular! 😎😮
It will not fly I promise you THAT!
If you laminate the fuselage it will be significantly stronger without much weight gain. So cool you're doing these projects
Awesome , can’t wait , Thanks CM & Friends 😊
from what i see, the b2 rc is going to spin and whirl out of control when the jets are on.... hahahaha good luck , next episode its gonna be the final one with the jet engine xD
This may be one of my favorite builds yet! 😂
Love the RC B2 content 👍🏻 Keep it up ✌🏻
Watching Cleetus is like watching 10 year old geeky kids with school science projects 🤣
The first second of this video absolutely WRECKED my eardrums. 👌
Cleet, you need to get that thrust centered up... NEEDS ANOTHER ONE MOUNTED ON THE BOTTOM, BUD! MOAR POWUH! Mount it on the bottom, then run dowels through the plane connecting the two mounts, and literally sammich the airframe.
As she sits, that thing is going nose-down under thrust, 100,000%. He just built a GREAT guided incendiary device, though! 🤣
Love the aviation content, I’m apart of the Lakeland aeroclub and love aviation so keep it going
Pitch authority on flying wings........
glad you realized we are just here for u and the dudes, just have fun with it. any content is good content with yall in it
We love u guys. Can’t wait to see more of this.
Cleet laying straight nickles down on those jet welds.
We're going flying with the Not-Wright Brothers on the Cleetus McFarland channel.👍
That's definitely going to provide a result...$50 says she pushes the nose down hard when throttled up lol
im not shure that would work, the thrust will be much higher the the cg and it will nose over as soon as it gets off the ground
For sure.
Nah I already thought about that we’re good.
@@CleetusM I can't wait to see this fly or not either way do it for Dale!
First B2 to break the sound barrier. Northrop Grumman better take notes 😆
Hearing a jet spool up is always a head mess because the thing just keeps getting faster and, when you think it's going hard, he says it's just warmed up and gives it throttle. Insane.
I love how Cleetus is more cautious on his B2 Bomber then blowing up the t case in the f150 last video.
Cleetus be like ...."BROTHER TAKE MY MONEY !!!!
absolutely insane 👌💪
Should have made something like a cross member mounting frame setup. This glue with the forces of jet engine and suction wont hold.
Please put some bolts through the mount - I can;t help thinking it's going to rip the mounts off at some point.
There is also quite a distance between the centre of gravity and the centre of thrust, which will make the aircraft pitch nose down. Good luck!
The melted tail should be fine - the jet mounts will provide the stabilisation that thing *used* to give. Can't wait to see this thing fly.
Cleetus!! You should have put bolts through it, with a bracket on the other side. That way it would it be way more sturdy than glue, and it would be much easier to service and change if you ever change design
When Ty zack and cleet all nodded it was game over 😂
I think it is going to fly. I'd use a smaller
Lighter fuel bottle , 8 Oz. Less wind drag.
Or it's going to turn right on takeoff .
It's going to need more runway to lift off & land. Better put glue on landing gears. How about 2 jets to replace both in wing motors. Replace rear tail fun with metal.
The Mtn Dew bottle was a nice touch!
“Can you do this?” “ o yeah!” Lol. Ty is the man!
If you didn’t get that perfectly straight the thrust will throw it off track in a heartbeat !
Cleetus from the UK.... You are nuts bud... Nuts... In a good way.
Well the motor is going to fly beautifully, but if you don’t screw those mounts in properly it won’t be taking the plane with it. This is going to be fun!!💥
Brother try to test it before her maiden flight. Don’t get me wrong I really hope she stays put but I don’t think it’s gona stay on. I was watching how fast those planes with those turbines fly and I was absolutely amazed!!! I couldnt believe how fast they are, they sound like they are a real jet breaking the sound barrier 😳 I’ll be speechless if the turbines and those brackets stay put ! I really hope they stay glued down man!! Best of luck bro !!!!
Hell yeah brother 💪💪❤️❤️you’ve been selected for today’s giveaway exercise🎁🎁🎁🎁Dm the above number to claim prize ⬆️⬆️⬆️⬆️⬆️…
So hands up, how many of us have bought or are planning on buying a rc plane or truck because of this rc content. 👋
ya have to love when cleeter side quests end up with their own arcs...
This is getting CRAZY!!! Hell Yeah Brother!!