I just received the burnisher. Amazing! You've done a wonderful job! I'm impressed ! Both woodwork from oak wood and leather work result is fantastic! Worth every penny of it
Thank you, I'm quite impressed at how much time it saves me. A full belt takes no time at all. Still working on the other bits with the guys at Just Wood, watch this space. Nige
Apologies to all those wanting a shipping price for overseas, we are working on this and it should be up and ready over the weekend. We do ship worldwide so please just be patient while we sort this out. Thanks JustWood
Shipping worldwide is now live on the website. We only ship via UPS to USA, Canada and Australia as it is a tracked and signed for service which is fully insured and takes 3-5 working days. You can also checkout via Paypal on the website or order on eBay: www.ebay.co.uk/itm/Armitage-leather-JustWood-Leather-Burnisher-Slicker-Grinder-tool-craftsman-/151601693893?pt=LH_DefaultDomain_3&hash=item234c2a44c5 Regards JustWood
I bought this burnisher from Just Wood about two years ago. I would welcome a lesson from you about replacing the abrasive paper. I find it difficult to get it tightly wound.
What is speed of your motor for leather burnishing? Nice informative video. add some knowledge from this video I added in my brain storage. actually I do some leather leather works and a lot of fine wood works. I normally burnish with hand, tried once or twice with a micro-lathe in my kitchen, where I do some fine woodworking. Now start more leather works, although I am a Tandy gold member and made many fishing related leather works, some for sale and for myself. I have all those component shown you have with me and I normally work with hardwood(exotic). I like leather works, but it don't bring money much and difficult to sell from Canada due to very high shipping price. Thanks again for nice video and I watched many video of yours and bought some items looking at your video.
This might be a silly question. Say I dyed some veg tan red. Have not dyed edges. Burnishing when I burnishing the edges I get red dye colour come out on the burnisher. How do I get that off, because if I burnisher another item that red is going to end up on new item. Thank you.
No way, I think that price is about right. Some dude had to turn this by hand on a lathe and then set that shaft inside strong enough to hold it on a motor going 1750-2000 rpm. It is not bad when you consider the amount of work that went into it and that it will last a long dang time.
Still no info on the rpms you require to burnish. And how high would be too high. I'd love to purchase but not without needed info. Please someone post.
I finally managed to save up some money for this tool! I just have one last question - I found two bench grinders for supported 12.7mm insert - the only problem they are rated to 200W and 250W - will it be sufficient enough with 200W or do I need a more powerful version? Next in line are the one with 370W, but it only comes in 16mm version. Pretty much all other more powerful models are with 20mm
This is a really nice set-up. Two questions for you. Will it fit both 1/2" and 5/8" arbors (not sure what mm is) and does it matter what RPM the motor is 3450 or 1750? Thanks, great video - I think i'm sold on this
How do I order tools from you. I can't pay by PayPal, don't have an account nor the necessary laptop only a tablet and no printer, very basic, a complete learner. Mike UK
I went to the Just Wood website to see how much shipping would be to the United States, but it seems that they only ship domestically. Am I out of luck because of where I am?
not at all, they do ship worldwide Phillip, the tool has only just gone up on the site and we are still ironing out a couple of things, international shipping is one of them. I shall speak with Jay in the morning but can drop him and email to sales@justwood.com and let him know where you are and he will sort a price for you. Nigel
Señor de Armitage, me gusta este util, y quisiera que me envie 2 unidades, digame como le hago llegar la transferencia del valor, por cierto mandeme el precio, atentamente.-
![Summer Walker - Heart Of A Woman [Official Lyric Video]](http://i.ytimg.com/vi/SFddctbZzw8/mqdefault.jpg)
Best burnisher on the market. Worth every penny! Improved my work ten fold. Highly recommend!
Just received my burnisher from Just Wood.
I already love what it had done for my edges.
Thanks Nigel
Just bought one of these, very very pleased with it. Cut my edging time by an hour!
I just received the burnisher. Amazing! You've done a wonderful job! I'm impressed ! Both woodwork from oak wood and leather work result is fantastic! Worth every penny of it
Congratulations!! That's a fine tool, can't wait to see what else is coming
Thank you, I'm quite impressed at how much time it saves me. A full belt takes no time at all.
Still working on the other bits with the guys at Just Wood, watch this space.
Nige
Ill be checking it out!
Apologies to all those wanting a shipping price for overseas, we are working on this and it should be up and ready over the weekend. We do ship worldwide so please just be patient while we sort this out.
Thanks
JustWood
Shipping worldwide is now live on the website. We only ship via UPS to USA, Canada and Australia as it is a tracked and signed for service which is fully insured and takes 3-5 working days. You can also checkout via Paypal on the website or order on eBay:
www.ebay.co.uk/itm/Armitage-leather-JustWood-Leather-Burnisher-Slicker-Grinder-tool-craftsman-/151601693893?pt=LH_DefaultDomain_3&hash=item234c2a44c5
Regards
JustWood
I bought this burnisher from Just Wood about two years ago. I would welcome a lesson from you about replacing the abrasive paper. I find it difficult to get it tightly wound.
What is speed of your motor for leather burnishing? Nice informative video. add some knowledge from this video I added in my brain storage. actually I do some leather leather works and a lot of fine wood works. I normally burnish with hand, tried once or twice with a micro-lathe in my kitchen, where I do some fine woodworking. Now start more leather works, although I am a Tandy gold member and made many fishing related leather works, some for sale and for myself. I have all those component shown you have with me and I normally work with hardwood(exotic). I like leather works, but it don't bring money much and difficult to sell from Canada due to very high shipping price. Thanks again for nice video and I watched many video of yours and bought some items looking at your video.
Stupid question - after working on black leather, will it transfer to the edge of a natural / neutral color leather?
This might be a silly question. Say I dyed some veg tan red. Have not dyed edges. Burnishing when I burnishing the edges I get red dye colour come out on the burnisher.
How do I get that off, because if I burnisher another item that red is going to end up on new item. Thank you.
I like the idea of not making the groves domed for thicker leathers. What RPM is your motor running at?
I need this
shame that amongst those rings there isnt a large smooth section for burnishing the back of belts?
Great Burnisher. But £75?
£75 is not much high in European standard income and quality. The wood is not great one, but said other woods are available.
@@bazlur-Vancouver Yes it is. It's waaay too much for a CNC made simple piece without any tolerances.
No way, I think that price is about right. Some dude had to turn this by hand on a lathe and then set that shaft inside strong enough to hold it on a motor going 1750-2000 rpm. It is not bad when you consider the amount of work that went into it and that it will last a long dang time.
Still no info on the rpms you require to burnish. And how high would be too high. I'd love to purchase but not without needed info. Please someone post.
Hi what is the timber burnished worth to purchase and post to QLD in Australia thanks Michael
International shipping is highlighted on the website, www.justwood.com
Nigel, I have to sell my kidneys to buy that burnisher
I finally managed to save up some money for this tool! I just have one last question - I found two bench grinders for supported 12.7mm insert - the only problem they are rated to 200W and 250W - will it be sufficient enough with 200W or do I need a more powerful version? Next in line are the one with 370W, but it only comes in 16mm version. Pretty much all other more powerful models are with 20mm
I'm from Brazil and I would like to get one of these as I can buy it
Love it! Thanks!!!
Artie, so do I!
Armitage Leather there was no option to ship to the US.
Artie Shell We are working on this Artie, email Jay at jason@justwood.com with where you are and he will sort a price.
Nigel
This is great and is a must have! what speed are you using this at? wont a normal bench grinder run too fast?
I'm using a grinder running at 2700rpm and it works fine.
Nige
This is a really nice set-up. Two questions for you. Will it fit both 1/2" and 5/8" arbors (not sure what mm is) and does it matter what RPM the motor is 3450 or 1750? Thanks, great video - I think i'm sold on this
How often do you need to clean the burnisher?
How do I order tools from you. I can't pay by PayPal, don't have an account nor the necessary laptop only a tablet and no printer, very basic, a complete learner. Mike UK
I went to the Just Wood website to see how much shipping would be to the United States, but it seems that they only ship domestically. Am I out of luck because of where I am?
not at all, they do ship worldwide Phillip, the tool has only just gone up on the site and we are still ironing out a couple of things, international shipping is one of them.
I shall speak with Jay in the morning but can drop him and email to sales@justwood.com and let him know where you are and he will sort a price for you.
Nigel
Señor de Armitage, me gusta este util, y quisiera que me envie 2 unidades, digame como le hago llegar la transferencia del valor, por cierto mandeme el precio, atentamente.-
What is the power of grinder and Rmp?
how many rpms is the grinder?
Wish you could sell these in the States
Looks like I now can, great
how much
On reflection...It's the best I've seen and perhaps not all that expensive.Well for me it is, sadly.
Your bearings need to be changed on the grinder. It should be completely silent with the exception of start up.
75 GBP for somethng, where material costs