Wow dami nman dugtong yan aksaya,ako non kinabit ko ung hose sa hose 1 dangkal lang at ininit ko sa gasera yung dulo ng pvc at sinuksok ksa hose at gnon din sa isa pa hose o dihumaba na ung hose ko nakakapag dilig nko ng halaman ,1986 pa yun ngayun ay 77 yrs.old na ako,
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
This is unnecessarily complicated. Too many joints. All you need is a short length of reducer pipe from the elbow, then heat gun the rubber hose over the reducer and put a zip tie to seal it.
Mas malaki pa ang gastos nyan,buti pa bumili ka na lang ng Connector,dami pa Nakunsumo at Nasayang na Oras jan at Materyales,Pinahirapan ang Sarili,Makatipid lang Kuno 🤣🤮🤣
Wow dami nman dugtong yan aksaya,ako non kinabit ko ung hose sa hose 1 dangkal lang at ininit ko sa gasera yung dulo ng pvc at sinuksok ksa hose at gnon din sa isa pa hose o dihumaba na ung hose ko nakakapag dilig nko ng halaman ,1986 pa yun ngayun ay 77 yrs.old na ako,
Wow! Really, this is a very nice & ever useful, best PVC pipes reducing connection technique in this best picturised Vlog video sharing by you for each & every, your this U tube channel viewers.
It will be easy to buy a connector :)))))
Right. I guess if you’re a million miles from a hardware store and/or short of cash this would be a reasonable fix, otherwise no.
Very long process. Just buy a connector.
this is a very good example of making life harder and complicated, more money, more time, more material waste, more labor more of everything.
Daming proseso nilagyan nlng sana ng hoseclip pgkatapos ma xpan yong hose
DIY stores or SHOPEE! & whaaLa! you'LL have that hose & PVC connected..WORK SMARTER...ALWAYS!
This is unnecessarily complicated. Too many joints. All you need is a short length of reducer pipe from the elbow, then heat gun the rubber hose over the reducer and put a zip tie to seal it.
Por supuesto. Of course
😂
You make people confuse....useless idea.
Too much job
Yes you're right
Man this would take me 1/2 a day and different size pvc pipes. Just get a garden tap and garden hose connectors.
For this small jobs U need's 1/2 day ???
Just a reducer & 1/2 inches pipe with 3" long is enough within 10 minutes job & it's done $$$.
anyone can do more easily than you struggling and making it a big job !!
Too complicated， not practical
You come to know various types of tools available in the market. Nice and home made decisions. Good.
Dami sahog daig p ang chapchoy
😅
Ok Naman piro👍! Complicated po!
Masyadong kumplikado to. I'm sure mas may simple na paraan.
This is insane connection.
Sending for support ❤and God bless
I don't know much about these things, but it is too complex, jarring on the mind.
I am reminded of a wise saying, ' Remedy is worse than the disease.'
Bro, napakadami naman ng procedures mo, di ko matamdaan lahat!
Kung ako yan lalagyan ko na lang ng faucet ang tubo galing sa source tapos ung garden hose lagyan ng fittings para makabit sa faucet.
Ganyan gagawin pag pahihirapin mo ang simpleng trabaho..
ginawa tayong tanga sa nag blog nito 😂😂😂
Oh , nice🎉
very good
Thanks for support my channel
Hjfhfjdhhjyfhhhh
Salamat ka da sana makabili ka na ng heatgun para hindi msdumi mga gawa mo.
Best way , just buy right fittings
Very young hands
Right
vera level bro 👍
Too much complicated. One can buy a reducer and get away with all such hassles.
Please apply precautions law as u r using saw with out frame
Just buy quick release and you're done. It's cheap
I FELL ASLEEP
Not satisfied to much extension of pvc pipe🤣😁
VERY USEFUL VIDEO!1 THANK YOU FOR SHARE!!
việc này giống như bạn lấy một chiếc xe lu, máy lu để đi trên trường học.
Not practical for DIYers. Just buy connectors.
Maligoy diskarte mo bro.
हा शुद्ध मुर्खपणा आहे. बाजारात अनेक स्वस्त कनेक्शन्स उपल्ब्ध आहेत.
Very good ustad shaver wali nikal kahan milty hay.
You can't join pe hose pipe and pvc rigid pipe with thf solvent cement 😃
thank you
Muy interesante, gracias.
it's amazing
Thanks For Support
This guy had to be geeked out on something because he was stuck on repeat.
Better than wasting so much money and time u can buy a plastic connector is best.
This JUNGLEE old methods don't U have any new stuff???
Masyadong madaming proseso layang mo lang ng reducer tapos na.
Punta k lamang sa hardware, buy ka joint's and Coupling kaysa ganyan trabahong matagal at aksaya ng oras😏👍
Very Best Knowledge , Thanks A Lot
Waist of time copper pipe two jubilee clips god easier buy far lol
In one viewing I can not remember this lot of joint,I just make my own short idea.
Кулибин бы наверное из могилы поднялся посмотрев эту дурь.
Kerja mudah dibikin ribet
72 connections in one joint
Oh! Very complicated.
Méthode : j'avais envi de m'emmerder ... 😂
JUST GET THE RUGHT FITTINGS AND DO IT RIGHT LOL
ഇതു് അല്പം ചിന്തിക്കാൻ കഴിയുന്ന ആർക്കും ചെയ്യാൻ സാധിക്കും
Aa simple work ki, entha time, malli aa plastic pieces thechukoni athiki time waste chesukontaa daa??…
Too complicated and expensive approach, fast and easy with correct connector available on markets.
Ok ha ❤
Supposed I don't hv heater machine
Then what to do?
Than sadly you have to buy a screw on connector set and install it. No leakage and easy to disconnect.
then You will be lucky because you won't waste much money on that useless material 😉
Quá dư thừa,mất thời gian!
What the hell. How many joints he made for that when you can do it in simple and easy way.
pwd naman ung pipe ang ipasok sa hose bakit ginamitan pa ng long nose na flies 😂😂😂
daming pa eklat
Daming proseso😅
Too much complicated 🙄
This is process is too long and complicated..
Which part is the "Host" ??
Just buy a hose adaptor and presto ....you just complicate simple procedure....
i use screw on connectors...
lol... I use only bicycle inner tube
Before knowing this you are very clever after knowing this you become fool
3/4 fta and 3/4 hose nipple it's easy simple install😅😅😅
E eu igual a um Otávio perdendo tempo para ver isso aí vai enganar o ca....
Com certeza vcs tbm estão perdendo seu tempo
😵💫😵💫😵💫😵💫😵💫😵💫😵💫🤯🤯🤯🤯
Ten times cut you cut pipe to many joints is that necessary???
Usless. Can buy a reducer connector from the store.
waste of time too many joints
good idea but not a good solution
Ngapain harus banyak sekali sambinganx
Your work is so complicated plenty of joints why not go directly to the point it needs only a reducer.
뭐가이리 복잡하지 70년대 수도배관
Very long process.
And waist of time lol
What was the purpose of this? Just to show people to do something the wrong way? Or is this examples of tweaker plumbing projects?
This is a waste of time and resources.
A waste of time of your viewers too.
Mais fácil comprar um engate rápido por R$ 15,00
Wht economy u suggest through this time consuming effort!!!
#စေတနာအများကြီးပါတဲ့ပညာပေးဗီဒီယိုအတွက်ကျေးဇူးပါ
Ang daming koniksion napakasimpling idogtong🤣🤣🤣
Just buy a new hose
Daming process tagal.
Too much joint..we make better than this...huuuu
😂😅😂😅😂😅😂
Ok pero maraming pautot...
Hahaha 😂😂
Mas malaki pa ang gastos nyan,buti pa bumili ka na lang ng Connector,dami pa Nakunsumo at Nasayang na Oras jan at Materyales,Pinahirapan ang Sarili,Makatipid lang Kuno 🤣🤮🤣
3rd world style
To much time it takes,did it in a simmple way
No good system,
Are stopped watching. Unless he's making something to make you live forever, it's not worth it.
Waste and complicated idea. This same item could have been completed with less number of joints. This is complicated and wasting of time.
浪費時間
👍👍🦾🦾💪💪
😴😴🙆
Time waste so many in out in our not so easy method