I’ve just bought farrow and ball eggshell for my UPVC front door... just realised that it says it’s for wood and metal, did you use this one please.. how is the door holding up ?
Hi . Which farrow and ball did you i Use estate eggshell ? Have noticed they have exterior eggshell on their website also ? Am gonna be doing outside pvc windows. I was recommended rather farrow & ball or zinsser allcoat which has a self primer built in.
I used a brush and roller and laid off with a brush as they were small panels. On big flat doors I use a short pile microfiber sleeve and lay off with the roller. Cheers Dan 🍻
The best thing to prep the door for undercoat is to rub down with 'mirka mirlon scotch ultra fine' £20 for 10 metres ebay. Use with warm water and a bucket. This is used in the motor trade to make paint stick to car body panels and they work to more exacting standard than decorating. Use any outdoor primer, you don't need to rub down after priming. You only need two topcoats after primer. Follow this and your paint will cover like you won't believe. You can thank me later. LETDK.
I wasn’t really understanding so what’s the color of the grey and finish exactly I want my door the same color what was the 123 paint was that the primer ?????????????
i think Anthony was asking if he could only use Zinsser, ie Zinsser All Coat Exterior Satin, water based from Rawlins, it comes in hundreds of colours from website, very quick delivery too
Hi Daniel I'm thinking of painting a new composite pvc door can I use this technique with the sugar soap prep, 123 primer and farrow and ball exterior wood paint?
@@danielnugentpainteranddeco557 right ok ,I got some light brown ones to price ,they want them black but trying to get them to have them dark grey,have you used any Benjamin Moore paint I like it better than f&b
@@kevinjackson6387 I've never tried Benji Moore but I have used Everall Aqual 10 by Tikkurila which is an exterior waterbased eggshell mixed to Farrow and Ball or Little Greene and even Dulux
@@danielnugentpainteranddeco557 right ok ,so much diff products out there now ,using tic stuff on a job at the moment ar2 ceiling paint,good gear ,I might get old frame and try do few samples on it ,as I’ve never painted upvc before
Great video - I followed this and my front door looks great. Although now I want to change the colour. Do I sand down the painted PVC before priming or do I paint on top of old paint?
Got to say Daniel that looks good, and saved a lot of people money. Question if you don't mind , was offered to paint an"Old glass fibre "double garage panelled door"... white, to be honest I bottled it because they wanted it" Black" ! Satin or near as possible just not gloss, the door was very pliable, especially the panels you could easily flex with your thumb. With all the etching/grip paints available eg Zinsser being one of the better, would you undertake painting a door as described, or advise client go the route as used in "marine" (boats) complicated & costly, but achieves the desired outcome . Cheers Mark
Hi. I'm going to attempt my own garage door soon which is self finished. I hear that Bedec Barn Paint is good and All Coat by Zinsser. Also MSP by Bedec. All Water based aswell. Test a patch out but remember it does take up to 7 days to cure.
@@markbusby9709 it's PVC. I think with the right primer you'll be ok with a satin or eggshell Top Coat. I still think the Farrow and Ball is the best as it's a nice flatter finish
@@danielnugent2168 can you confirm if its the farrow and ball exterior eggshell as I`ve been reading not recommended for exterior plastics, nice job by the way
![BabyChiefDoit - Too Slow (feat. STAR BANDZ) [Official Music Video]](http://i.ytimg.com/vi/zayaxws7RPg/mqdefault.jpg)
Looks fantastic!
Many thanks mate
Beautiful! Thank you for sharing, great inspiration!
Thankyou for your kind words
Lovely job! Thanks 👍
Awesome video
Cheers mate
Nice solid neat job as always matey looks as you said a new door keep the vids coming
Many thanks mate.
Looks mega pal! Good work!
Cheers mate
@@danielnugentpainteranddeco557 how did you find the zinsser sticking to the sealant on the frame?
@@wemoveforward6413 yeah all good.
Nice finish. Did you use a roller or brush? Thanks
Have a word with the owner, gotta match those 2 meter boxes outside with the same colour
Thanks , great video
Gret stuff Daniel
Was wondering which brand round sash brushes do you use/prefer?
Thinking of ordering some Hamilton’s.
Hi. I've gone on to Arroworthy as I find they last and also they are compatible with the Brushmate 20 box for solvent paint brushed.
Cheers Dan
Brilliant job mate. If painting the inside is interior egg shell needed or can I just use the exterior stuff? Worried about safety.
Yes you can as its all water based. Cheers Dan
I’ve just bought farrow and ball eggshell for my UPVC front door... just realised that it says it’s for wood and metal, did you use this one please.. how is the door holding up ?
@@Trish-ql9kz door still looks great. Make sure you get the exterior eggshell
looks nice, but why didn't you put the dark tones exterior F&B Uc on before you did the finish coats, it would help with coverage?
Hi . Which farrow and ball did you i
Use estate eggshell ? Have noticed they have
exterior eggshell on their website also ? Am gonna be doing outside pvc windows. I was recommended rather farrow & ball or zinsser allcoat which has a self primer built in.
There is now a B.I.N Aqua for primer but I use Caparol Haftprimer and defo exterior eggshell
Hi Dan, great work as always! Will Zinsser BIN work too as I have loads left and don’t want to go and get 123 or Otex Akva if I can avoid it! Thanks
Perfect to use
Is this the same method to use in internal pvc skirting boards?
Hi what did you use to prepare the door before primer
Hi.
I used Virasol which is a degreaser
You can pick it up on MyPaintbrush
Thanks did you key the door before so the paint sticks
No mate but you can use a sand pad. They are like a flexi sponge with a sand facing each side
Did you use brush and roller? When you use both, do you lay off with the brush after rolling? Thanks, mate.
I used a brush and roller and laid off with a brush as they were small panels. On big flat doors I use a short pile microfiber sleeve and lay off with the roller. Cheers Dan 🍻
@@danielnugentpainteranddeco557 thanks, your videos are incredibly helpful.
@@Avital4414 thanks so much mate. I try and give my most honest opinion and try and help others when I come across ideas or problems. Cheers Dan
The best thing to prep the door for undercoat is to rub down with 'mirka mirlon scotch ultra fine' £20 for 10 metres ebay. Use with warm water and a bucket. This is used in the motor trade to make paint stick to car body panels and they work to more exacting standard than decorating. Use any outdoor primer, you don't need to rub down after priming. You only need two topcoats after primer. Follow this and your paint will cover like you won't believe. You can thank me later. LETDK.
Nice tip. Cheers
Didn't know that car's were made out of upvc...
@@englishdecorator I wish to extend my thanks for your highly technical and erudite contribution. Long may it continue.
I wasn’t really understanding so what’s the color of the grey and finish exactly I want my door the same color what was the 123 paint was that the primer ?????????????
Hi. The primer is Zinsser 1.2.3. It's water based. And top coat is Farrow And Ball Exterior Eggshell and the colour is Downpipe. Cheers Dan
Daniel Nugent So the color is downpipe by who what brand I have no idea about paint 🎨 so I’m tryna get this right
@@Dreams2come_ Farrow and Ball
Daniel Nugent ok thanks
Can I ask what's the best roller to use
Two Fussy Blokes rollers are good. Or Wooster or Arroworthy. All are microfiber. I would use a medium pile.
Can I use just Zinsser Allcoat Exterior Satin or should go with Zinsser 123 first and then separate colour? thank you
Zinsser all coat is a self priming and undercaoting and also a finish. Yes it has good adhesion aswell so you can use that neat. Cheers Dan
@@danielnugent2168 Thank you!
Hi. I’ve looked on farrow and balls website and they don’t do and Exterior Estate Eggshell?
Hi. Yes they should do. If you can't see it then try B&Q or Brewers as they stock it.
Cheers Dan
If you go back on Farrow and Ball and look for Exterior Eggshell. That will work. As the Estate is interior. Cheers Dan
Did you end up putting 3 coats or 2
Three coats as it was over white primer. Cheers
Hi Daniel, could I just use zinsser one coat on some upvc cladding I have or better to prime first?
Thanks for a great video.
Hi. Zinsser is the primer. Then whatever you want on top as a finish. Cheers Dan
@@danielnugent2168 oh ok thanks for replying mate. All the best.
i think Anthony was asking if he could only use Zinsser, ie Zinsser All Coat Exterior Satin, water based from Rawlins, it comes in hundreds of colours from website, very quick delivery too
is this done with roller or brush
I did it with a brush
I think it looks beautiful but am very sceptical on the wear factor
The door still looks good today.
No wear as of yet
Dude was that just with a brush no roller involved i am going to do mine but thinking of brush marks
Hi. I got away with just a brush and you can't see any brush marks. I hear Two Fussy Blokes roller sleeves for a sprayed finish are good
1200 grit with water.
Hi Daniel I'm thinking of painting a new composite pvc door can I use this technique with the sugar soap prep, 123 primer and farrow and ball exterior wood paint?
Hi. Yes you can. Make sure you get the exterior estate eggshell and not the interior estate eggshell. Regards Daniel
@@danielnugent2168 thank you so much 😊
Where did u get the primer from thanks sam
Hi. I got it from Crowns but you can get it in Screwfix aswell. Cheers
Hi mate ,what about when the door or windows have been rapped would you do same way
Yes I would but I've just purchased a GX21FF Graco machine so might start spraying more
@@danielnugentpainteranddeco557 right ok ,I got some light brown ones to price ,they want them black but trying to get them to have them dark grey,have you used any Benjamin Moore paint I like it better than f&b
@@kevinjackson6387 I've never tried Benji Moore but I have used Everall Aqual 10 by Tikkurila which is an exterior waterbased eggshell mixed to Farrow and Ball or Little Greene and even Dulux
@@danielnugentpainteranddeco557 right ok ,so much diff products out there now ,using tic stuff on a job at the moment ar2 ceiling paint,good gear ,I might get old frame and try do few samples on it ,as I’ve never painted upvc before
Great video - I followed this and my front door looks great. Although now I want to change the colour. Do I sand down the painted PVC before priming or do I paint on top of old paint?
Hi. Just de nib it slightly and then repaint. No need to sand down hard. Cheers Dan
Can you use the zinsser 123 with a spray gun and also the farrow & ball? Cheers
Hi. Yes you can. Just thin it out slightly.
You can use aerosol cans, 6x grey primer £20 amazon. Plus a few cans of whatever top coat u fancy.
No masking. How did u do such a good job? Magical! I'd have paint up the outside walls
Years of experience. Cheers
@@danielnugent2168 cock
Got to say Daniel that looks good, and saved a lot of people money. Question if you don't mind , was offered to paint an"Old glass fibre "double garage panelled door"... white, to be honest I bottled it because they wanted it" Black" ! Satin or near as possible just not gloss, the door was very pliable, especially the panels you could easily flex with your thumb. With all the etching/grip paints available eg Zinsser being one of the better, would you undertake painting a door as described, or advise client go the route as used in "marine" (boats) complicated & costly, but achieves the desired outcome . Cheers Mark
Hi. I'm going to attempt my own garage door soon which is self finished. I hear that Bedec Barn Paint is good and All Coat by Zinsser. Also MSP by Bedec. All Water based aswell. Test a patch out but remember it does take up to 7 days to cure.
Thx for your reply Daniel, is your door fibre glass or other? as f/glass has its issues that I'm concerned with. TY
@@markbusby9709 it's PVC. I think with the right primer you'll be ok with a satin or eggshell Top Coat. I still think the Farrow and Ball is the best as it's a nice flatter finish
@@danielnugent2168 can you confirm if its the farrow and ball exterior eggshell as I`ve been reading not recommended for exterior plastics, nice job by the way
@@chelseyhughes7089 Hi. If you put the Zinsser123 on first then your good to go. Cheers Dan
Shouldn't you have removed handle
I did if you look close on the white primer. I left the lock in as it wouldn't budge. I put the handle back after each coat dried.
do you prepair the door before you prime it...?
Hi. Yes I wiped it all over with sugar soap.
@@danielnugent2168 cheers
was the farrow and ball paint made for masonry or wood exterior...?
@@mrlewisnet Hi. This is exterior eggshell for wood. Masonry is for render. Farrow and Ball do both
@@danielnugent2168 thank you very much going to give it a try
I bet it chips off
Or when the door has been left shut for a few days then reopened and it will all come off where the seals touch.
Just spray it, sorted !!
Rob Hunt not everyone have a sprayer.
Stick to the painting man Co's your camera work is 💩!
But great finish
Wont last not made to be painted.