Make sure to READ the description...and obviously like and subscribe ;) IMPORTANT: For those who don't see the setting for the Preset J, make sure you download the xml file in the SAME folder as the nvidia profile inspector, and if you still don’t see it click on this: imgur.com/a/ME0GXTu
Great vid, I did it and HOLY SHEEP what a difference. I've been incredibly frustrated with the middle-distance blur in this game for so long, having invested so much energy trying to perfect it, and here it is at the click of a button!!! Nice one VR dad, I guess we'll have to reset these changes in the nvida profile once the official dlss4 comes out? so we don't forget and get held with this one version.
I am wondering if this (as it is a DLSS) would work with Nolvus? Nolvus is all ENB graphics, but outside of the name Community Shaders, DLSS should be just a graphics update? Am I wrong?
@@stianronningo5469 I honestly didn’t expect the frog there. I saw them around before but they looked completely different, kind of brownish. This was green and kind of shiny. O didn’t even expect I could pick it up! 🤣
Same here, got it down at least ultra in VD with no noticable loss in quality. No ghosting or edge shimmer at all. The only artifacts I've seen are very bad flickering on large object edges during rain or when distorted by refections. These are worse than DLSS3 version atrifacting here, but I think the trade off is more than worth it.
Thought you were giving it one too many woows and holy shits...until I installed it. 🙂 Woow and holy shit - it really is that amazing. 🙂 Thanks for the video - you made it so easy to work out.
Great video content, as always, DaD!👍...here is my next tuning step : I will try to kiss this little green frog in VR and probably this will turn my 3080Ti into a RTX5090 !😎🤣
hi, i followed step by step but my communiy shaders - DLSS4 overwrite folder just is filled with different stuff to yours, it just has a file called SKSE/plugins/streamline/nvngx_dlss.dll and the icon is different
It looks good but it tanks my performance; probably because my VRAM usage is pretty much at it limit already. I run the game without Upscalers or AA and just use SS. I'm using a 3080(only 10 gb Vram).
There are no DLSS settings in Nvidia profile inspector it goes from (CUDA - Force P2 state) to (Extension Limit).there are no DLSS settings in there, I have a RTX 3090.
@@slamminx3 if you’re using open composite Vr perf kit should be disabled. I disabled also cas. Keep taa tweaks. Make sure to enable DLAA in the cs menu
@@VRDaD Thanks. Nope I'm not using open composite. When you say enable DLAA in the cs menu, sorry where would I find that? Do you mean community shaders? I'm using the performance - default version.
@@slamminx3 I Am assuming you have CS 1.0? If you press the "End" key on your keyboard a menu should appear in the skyrim windows with a lot of options. I mentioned it also in my performance guide on 3.5.
@@VRDaD Thanks, I found it. Do I also need to change the DLSS Preset in this menu too? It says Preset F is intended for DLAA modes. Its currently on Preset C.
Hey im using mad gods overhaul. Im using an enb preset. Not sure if i need to do anything to activate the dlss 4. Pressing the end key only brings up the enb menu. Also does this emprove performace or make it worse? Always thought dlss improves performace?
Hey I saw on your other performance guide video that you have Snapdragon Upscaling in Virtual Desktop enabled. Is that a must for clarity or can it be turned off? MGO's Image Quality and Performance guide says not to use it but I see you use it with no issues. Im on a 4080 super and I want to enable most of the Mod Organizer settings to quality and Im looking to see what other settings I can turn down to save performance because DYNDOLOD and CS on quality looks too good to give up on.
@@Esradel also you can definitely put CS in balanced, then tweak it in the CS menu. Try to remove extended shadows. Dyndolod on performance will not result in a significant loss in visual quality.
@@VRDaD Ah ok Ill try that then. Thank you! Also, did you settle on 90 fps with ssw? I was thinking of turning it down to that and keep Godlike to see how that worked
@ to be honest I could probably play without SSW myself, but those were optimal setting I believe should go well for the majority of people with high end systems but without a 4090. If you play seated then SSW is going to be bad for you apparently from what I am told.
Windows Defender is flagging the file "Community Shaders - DLSS4 overwrite.7z" as potentially harmful, preventing me from downloading it. For now, I’m still using MGO 2.0, but I might reconsider once I upgrade to 3.5.
this is exciting i will try to hook up the DLSS on my 3.5 skyrim VR today... i currently cant get the openXR to work the runtime is stuck on steamVR. any ideas VR Dad? I have the DLAA turned on and its beautiful, but want to try this out more
DLAA must remain active in your settings. I think this takes its place as far as I understand it. I don't know why steam vr runs even when you selected open composite. You're not alone in this...someone else has the same issue. Maybe is the setting on the default runtime. SteamVR is selected as default runtime instead of OpenXR. Not sure though.
@ I found a free program called ‘XR runtime picker for OpenXR’ and that allowed me to select VDXR, now when I start the game it all works perfect👌🏼DLSS4 is awesome now
I don't understand. My community shaders GUI doesn't even have DLAA as an option in Display settings... Is there something I need to do to enable it? I only see FSR no DLSS. I have an nvidia card.
To see the FORCED DLSS 3.1.11 setting, Daddy may have missed showing you how to enable it :) You need to access the hidden NVIDIA settings by clicking on the icon resembling a ' Magnifying glass & gears ' in the upper panel.
I am wondering if this (as it is a DLSS) would work with Nolvus with its MO2? Nolvus is all ENB graphics, but outside of the name Community Shaders, DLSS should be just a graphics update? Am I wrong?
Question: How do you disable DLSS 4 once going through the steps? Is it enough to untick the mod in M02, or do you need to change the Nvidia settings too?
@@ExarKun0 Yeah, but on both Skyrim VR, and Fallout 4 VR, it caused a lot of bad shimmer for me, and I have a 4080S. If you want to try I just Renamed the folder SKSE to F4SEVR. Good luck, let me Know your results.
Have anyone been able to run DLSS 4 with PureDark's upscaler mod? The image is shaking, I think it upscales only for one eye. Previous dlls worked just fine. Sadly I'm stuck with previous CS version so can't really use it :(
What are your settings for skyrim? Every supersampling at 1.0 and just godlike in VD? I honestly couldnt make game clear at all on Quest 3, the TAA always ruins it and disabling wasnt an option due to shimmering. The obly way I found was to play at around 350% supersampling yo reach clarity with taa on, so if this can solve this issue, then it would be unreal
I have made an entire video on it :) please do check it out because I go into detail there. You should use DLAA not TAA. And yes, this will solve your issue. I am pretty confident about it. you should put your resolution to 100% and use open composite. do not stack up resolution multipliers.
@@VRDaD sorry, essiential info missing... The bridge in Riverwood, as well as the gate some meters before it. My assumption is, that the lights from the torches has issues, since it looks like shader issues (despite compiling shaders 100%) I could reproduce the problem every time i used DLSS4 with preset j, the additional CS DLSS 4 mod ans dlaa in the cs menu activated. If i deactivated the mod and used taa, everything looks fine,
Looks so good! Sorry for being a newby but... does this impact performance? I have a 3080 ti 12GB VRAM, would this work? Thank you, your content is the best! :D
DLSS4 does impact perf, you can mitigate it by lowering resolution. Though I haven't found the sweetspot to make DLSS 4 run just as smooth AND look better than DLSS 3. Make sure to run VRAMR if you have perf issues, that's a very important step for mid-range GPUs.
Well…tbh, the bump in clarity is so obvious that if you’re not getting that you are probably doing something wrong. Make sure to have DLAA active in the CS menu.
Great mine doesn't have that DLSS3.1 setting in common (section 5) . Everytime I try follow these tutorials i get stuff missing that blocks me from advancing. I have a 4080 super so Why it isn't there I do not know.
Hi man ! What are we doing with the .xml file ? And for the update of yhe other video, i buy virtual desktop but i cant seem to work with steamvr. I have a good 60fps though ! After listening to yesterday video, i could achieve way more :) ! I subscribe you for that ! You do a good job ! Keep making video !
The xml should go into the same folder as the nvidia profile inspector. It’s basically the preset J. Glad you found my video useful and thank you for subbing!
@@D.M.Transcendent I made a separate video if you want to check it out. A 2080 is a bit below the minimum recommended for this modlist but you can still try and see how it goes. The worst that can happen is that you waste time. There is a link to a mod tutorial on VRAMr in thr performance video I am talking about. That would definitely make a difference for GPUs with 8-10GB of VRAM
@@TravisG DLSS is an Nvidia thing. Sorry about that. There is FSR available and CAS sharpening if you wish to use those, but the level of clarity is no way near to this.
If this might mess up other DLSS games and nVidia is releasing an official driver on the 30th, then how do we uninstall this later so it doesn't mess up what is released on the 30th?
How are you getting 90 fps, i have better specs, am using FUS mod pack, which is much less demanding than yours. And i only get 75fps with the new community shaders mod and godlike running. Before updating community shaders and addings dlss i was getting like 120fps in godlike. What happened?
@ for 3.5 is a must, unless you want to play at 60 fps in the most demanding areas. I could get higher framerates going around, but I think that consistency is the most important thing so I recommend to keep SSW on.
The one thing that always annoyed me was things more than 15’ away were always blurry no matter what. Less than 10’ great. Less than 5’ amazing. So you are telling me we finally have this problem solved?
Ahhh, wow, holy "sheeep", my Goodness!🤣👍thanks again, DaD for another great Video!👌I like your italian accent so much (reminds me on a very good friend I have in italy!) - you give me hope that I can finally get this modlist run decent on my 3080Ti and save another 2.000,- bucks for buying a 5090?-is anybody here willing to share working settings for similar rig like Ryzen5800XT/32Gb Ram/RTX3080Ti ? THX2all!😗
@@fragman-1 thanks for your kind words. Check out my latest 3.5 performance guidance, I explain the process how to get to the optimal settings. And also some other further steps you could do to improve performance.
@@VRDaD Thx mate! I already watched, lowered CS to low, used open Composite,...etc.👍-everything was fine awaking in my house, but when entering i.e. "whiterun" I was watching a slideshow in 36fps ssw. Now, I have updated successfully to MGO to 3.5.1 a minute ago using "overwrite installation", now will try with DLSS4...🤞
If you've read the description, the linked reddit post, watched the video and you still need instructions...I'm afraid this may be a you problem and not a fault with the information given to you.
Make sure to READ the description...and obviously like and subscribe ;) IMPORTANT: For those who don't see the setting for the Preset J, make sure you download the xml file in the SAME folder as the nvidia profile inspector, and if you still don’t see it click on this: imgur.com/a/ME0GXTu
Use 264+ with 400bit. Av1 has high latency
What's the .XML file for? Is where I put it important? Does it just need to be in the same folder as the other 2?
@ it’s basically the preset J. Keep it in the same folder as the nvidia profile inspector otherwise the Dlss setting will not be visible
So when i try using nvidia inspector nothing happens. Do i need to download the whole nvidia experience? I just have drivers @VRDaD
@ obviously you need nvidia drivers installed on your system. Please make sure you have the xml in the same folder as the inspector.
Wow! Thank you for great info, you are one of the best Skyrim VR RUclipsrs!
@@Serx1079 thank you for kind words 😊
Great vid, I did it and HOLY SHEEP what a difference. I've been incredibly frustrated with the middle-distance blur in this game for so long, having invested so much energy trying to perfect it, and here it is at the click of a button!!! Nice one VR dad, I guess we'll have to reset these changes in the nvida profile once the official dlss4 comes out? so we don't forget and get held with this one version.
@@adamcox81 yes I think we should reset it.
You are the man! Thank you for making this! Love the reaction😂😂
Great stuff, as someone said, "you are the best"
I am wondering if this (as it is a DLSS) would work with Nolvus? Nolvus is all ENB graphics, but outside of the name Community Shaders, DLSS should be just a graphics update? Am I wrong?
This is amazing, thanks for the vid.
@@ViniViVinsi you are very welcome!
I laughed so hard when you said "oh wow is this a frog? what the!" 😂Thanks for all your videos, buddy. I love your content and I love Italy as well.
@@stianronningo5469 I honestly didn’t expect the frog there. I saw them around before but they looked completely different, kind of brownish. This was green and kind of shiny. O didn’t even expect I could pick it up! 🤣
@@VRDaD 😂😀
Very helpful, thank you!
Thank you for watching!
Yep, tried the new DLSS4 on LukeROSS and Nvidia mods and it's a game changer!
Nice!
@@VRDaD Tell me, is it possible to do this in other games that you play through UEVR or is it only for Skyrim?
@@userVladimir_B it should be possible to do this in other games, yes. Just wait for nvidia to update the drivers.
Holy crap the extra clarity is insane. I even lowered my resolution two notches and the distance is still clear.
I told you… I wasn’t joking
@@VRDaD Crazy, but I am not sure if its working. Do I need to change any Display Settings in Community Shaders at all to match ?
@ just make sure that DLAA is enabled in the CS menu
@@VRDaD wait, are you sure? I don't think I have dlaa on and it works
Same here, got it down at least ultra in VD with no noticable loss in quality. No ghosting or edge shimmer at all. The only artifacts I've seen are very bad flickering on large object edges during rain or when distorted by refections. These are worse than DLSS3 version atrifacting here, but I think the trade off is more than worth it.
Thought you were giving it one too many woows and holy shits...until I installed it. 🙂 Woow and holy shit - it really is that amazing. 🙂 Thanks for the video - you made it so easy to work out.
@@nzquads7831 I never fake my reactions. If something looks like crap, I will tell you it looks like crap.
Great video content, as always, DaD!👍...here is my next tuning step : I will try to kiss this little green frog in VR and probably this will turn my 3080Ti into a RTX5090 !😎🤣
@@fragman-1 good luck! I am keeping the fingers crossed for you 🤞🏻
I wonder if Nvidia is going to add this to supported games in their app. I'm waiting for the updated driver launch on the 30th.
@@cyberletho probably yes.
hi, i followed step by step but my communiy shaders - DLSS4 overwrite folder just is filled with different stuff to yours, it just has a file called SKSE/plugins/streamline/nvngx_dlss.dll and the icon is different
I have no idea what you are doing though because I never mentioned the overwrite folder. Please read the description.
It looks good but it tanks my performance; probably because my VRAM usage is pretty much at it limit already. I run the game without Upscalers or AA and just use SS. I'm using a 3080(only 10 gb Vram).
There are no DLSS settings in Nvidia profile inspector it goes from (CUDA - Force P2 state) to (Extension Limit).there are no DLSS settings in there, I have a RTX 3090.
click on this: imgur.com/a/ME0GXTu
@@VRDaD Same here, I click on the top icon as you suggest but they not showing up still.
@@999jay999 did you put the xml file in the same folder as the inspector?
@@VRDaD haha did now. Silly question once again but how do I know its working ?
@@VRDaD Oh no I didn't lol
kay i figured it out, but you should have mentioned that the XML file it HAS to be where you extract nvidia profile inspector.
It’s In the description…that’s why I pinned a comment that says make sure you read the description 😅
@@VRDaD Sorry, so used to gettin spoonfed step by step, a bit spoiled. thanks
@@VRDaD Hands up, I missed that crucial critical bit..
THANKS for that great video tutorial! I was reading xml file...does it use REBAR? :)
hoenestly...I don't know...
Do I need to enable/disable anything else in Mad gods after installing this? I currently have VR Perormance Kit CAS and TAA Tweaks enabled.
@@slamminx3 if you’re using open composite Vr perf kit should be disabled. I disabled also cas. Keep taa tweaks. Make sure to enable DLAA in the cs menu
@@VRDaD Thanks. Nope I'm not using open composite. When you say enable DLAA in the cs menu, sorry where would I find that? Do you mean community shaders? I'm using the performance - default version.
@@slamminx3 I Am assuming you have CS 1.0? If you press the "End" key on your keyboard a menu should appear in the skyrim windows with a lot of options. I mentioned it also in my performance guide on 3.5.
@@VRDaD Thanks, I found it. Do I also need to change the DLSS Preset in this menu too? It says Preset F is intended for DLAA modes. Its currently on Preset C.
Hey im using mad gods overhaul. Im using an enb preset. Not sure if i need to do anything to activate the dlss 4. Pressing the end key only brings up the enb menu. Also does this emprove performace or make it worse? Always thought dlss improves performace?
1st link doesn't work :(
great video! Is there a way to tell if DLSS is enabled?
@@soids3939 no, keep DLAA enabled! You’re going to see a massive…MASSIVE improvement in visual quality.
@@VRDaD thank you and sorry I answered my own question a second after posting it and rereading the description.
@@soids3939 no problem! 😉
Hey I saw on your other performance guide video that you have Snapdragon Upscaling in Virtual Desktop enabled. Is that a must for clarity or can it be turned off? MGO's Image Quality and Performance guide says not to use it but I see you use it with no issues. Im on a 4080 super and I want to enable most of the Mod Organizer settings to quality and Im looking to see what other settings I can turn down to save performance because DYNDOLOD and CS on quality looks too good to give up on.
@@Esradel I use it because I record stuff…so a boost in performance is welcome. If you don’t record your gameplay, you don’t really need it.
@@Esradel also you can definitely put CS in balanced, then tweak it in the CS menu. Try to remove extended shadows. Dyndolod on performance will not result in a significant loss in visual quality.
@@VRDaD Ah ok Ill try that then. Thank you!
Also, did you settle on 90 fps with ssw? I was thinking of turning it down to that and keep Godlike to see how that worked
@ to be honest I could probably play without SSW myself, but those were optimal setting I believe should go well for the majority of people with high end systems but without a 4090. If you play seated then SSW is going to be bad for you apparently from what I am told.
Gotcha, thanks for the help and all you do! Your videos have been a godsend now that I got into modded skyrim VR, appreciate ya :)
Windows Defender is flagging the file "Community Shaders - DLSS4 overwrite.7z" as potentially harmful, preventing me from downloading it. For now, I’m still using MGO 2.0, but I might reconsider once I upgrade to 3.5.
The file is ok.
this is exciting i will try to hook up the DLSS on my 3.5 skyrim VR today... i currently cant get the openXR to work the runtime is stuck on steamVR. any ideas VR Dad? I have the DLAA turned on and its beautiful, but want to try this out more
DLAA must remain active in your settings. I think this takes its place as far as I understand it. I don't know why steam vr runs even when you selected open composite. You're not alone in this...someone else has the same issue. Maybe is the setting on the default runtime. SteamVR is selected as default runtime instead of OpenXR. Not sure though.
@@VRDaD appreciate the help dude!
@ I found a free program called ‘XR runtime picker for OpenXR’ and that allowed me to select VDXR, now when I start the game it all works perfect👌🏼DLSS4 is awesome now
I don't understand. My community shaders GUI doesn't even have DLAA as an option in Display settings... Is there something I need to do to enable it? I only see FSR no DLSS. I have an nvidia card.
What version of CS are you on?
To see the FORCED DLSS 3.1.11 setting,
Daddy may have missed showing you how to enable it :)
You need to access the hidden NVIDIA settings by clicking on the icon resembling a
' Magnifying glass & gears '
in the upper panel.
I appreciate this info, and I did... but still don't see it!
@@skippychurch2965 Make sure you have CustomSettingName
Daddy forgets…but do not forgive! 🤣 jk I think I uploaded your screenshot in one of my previous replies
@@skippychurch2965 Same here, no show. I use a 3080ti.
@@999jay999 Place CustomSettingNames.xml inside the same folder you have placed Nvidiaprofileinspector, also doublecheck the name of the file
I am wondering if this (as it is a DLSS) would work with Nolvus with its MO2? Nolvus is all ENB graphics, but outside of the name Community Shaders, DLSS should be just a graphics update? Am I wrong?
if it works in VR probably yes, it would work with nolvus. Try it if you can!
Yes, if you load it into Nolvus MO2, it works.
Question: How do you disable DLSS 4 once going through the steps? Is it enough to untick the mod in M02, or do you need to change the Nvidia settings too?
Yes just untick it.
Thank you for the Info. Do you know if this will work for Mad Gods Fall Out 4 VR too?
@@BiggDaddyDann-ib5xp I don’t know, honestly. If fo4 has a DLAA option probably yes…but I am not sure.
@@VRDaD Thank you for replying. Have a great day.
@@BiggDaddyDann-ib5xphave you figured this out? Does it work with FO4VR mad god?
@@ExarKun0 Yeah, but on both Skyrim VR, and Fallout 4 VR, it caused a lot of bad shimmer for me, and I have a 4080S. If you want to try I just Renamed the folder SKSE to F4SEVR. Good luck, let me Know your results.
Have anyone been able to run DLSS 4 with PureDark's upscaler mod? The image is shaking, I think it upscales only for one eye. Previous dlls worked just fine.
Sadly I'm stuck with previous CS version so can't really use it :(
What are your settings for skyrim? Every supersampling at 1.0 and just godlike in VD? I honestly couldnt make game clear at all on Quest 3, the TAA always ruins it and disabling wasnt an option due to shimmering. The obly way I found was to play at around 350% supersampling yo reach clarity with taa on, so if this can solve this issue, then it would be unreal
I have made an entire video on it :) please do check it out because I go into detail there. You should use DLAA not TAA. And yes, this will solve your issue. I am pretty confident about it. you should put your resolution to 100% and use open composite. do not stack up resolution multipliers.
I will check it out. I've been tryharding with supersampling but the difference was barely there and perfomance cost was killing me
@ I promise you...if you do it correctly you WILL see a massive difference. I do not exagerate my reactions. That was a serious Holy shit moment.
@@VRDaD I installed Community Shaders and got 10 fps and -50ms at GPU with RTX 4070 on vanilla no mods, wtf XD
@ On vanilla? wtf...something is wrong with your pc....
Thanks for the guide. Do you have image issues too? The lighting at the bridge seems to be broken...
@@74amazing I don’t think so. Which bridge are you talking about?
@@VRDaD sorry, essiential info missing... The bridge in Riverwood, as well as the gate some meters before it. My assumption is, that the lights from the torches has issues, since it looks like shader issues (despite compiling shaders 100%) I could reproduce the problem every time i used DLSS4 with preset j, the additional CS DLSS 4 mod ans dlaa in the cs menu activated. If i deactivated the mod and used taa, everything looks fine,
@@74amazing interesting. I'll look into this
@ Thank you!
Looks so good!
Sorry for being a newby but... does this impact performance?
I have a 3080 ti 12GB VRAM, would this work?
Thank you, your content is the best! :D
Thank you! The answer to your question is no! I didn’t notice any performance degradation!
DLSS4 does impact perf, you can mitigate it by lowering resolution. Though I haven't found the sweetspot to make DLSS 4 run just as smooth AND look better than DLSS 3. Make sure to run VRAMR if you have perf issues, that's a very important step for mid-range GPUs.
Hey man, how do you know if DLSS 4 is active? Should I decrease rendering resolution manually? From where?
Well…tbh, the bump in clarity is so obvious that if you’re not getting that you are probably doing something wrong. Make sure to have DLAA active in the CS menu.
How to enable it do i need to change something in game because i think it's not working to me should i press home key?
@@DarkZenonia end key and enable DLAA
Great mine doesn't have that DLSS3.1 setting in common (section 5) . Everytime I try follow these tutorials i get stuff missing that blocks me from advancing. I have a 4080 super so Why it isn't there I do not know.
@@Steelninja77 did you read the description and the pinned comment?
make sure the xml file is on the same place as the inspector
Is the DLSS 4 switched to "Performance" finally acceptable visualy? It was not with DLSS 3.
@@pistopit7142 don’t think you have a performance setting. You are basically using DLAA…
@@VRDaD DLAA is not even upscaling as the screen percentage is set to 100%
is this compatible with RTX 30xx series? like a 3090
yes it is, my friend. All RTX cards can take advantage of DLSS4
Hi man ! What are we doing with the .xml file ? And for the update of yhe other video, i buy virtual desktop but i cant seem to work with steamvr. I have a good 60fps though ! After listening to yesterday video, i could achieve way more :) ! I subscribe you for that ! You do a good job ! Keep making video !
The xml should go into the same folder as the nvidia profile inspector. It’s basically the preset J. Glad you found my video useful and thank you for subbing!
@@VRDaD oh i see thx :) I try it ! Very crisp like you say ! Have a nice day !
What kinda of performance strain can we expect with this? Do you need a beast of a PC or could a 2080 super 8gb run this?
@@D.M.Transcendent I made a separate video if you want to check it out. A 2080 is a bit below the minimum recommended for this modlist but you can still try and see how it goes. The worst that can happen is that you waste time. There is a link to a mod tutorial on VRAMr in thr performance video I am talking about. That would definitely make a difference for GPUs with 8-10GB of VRAM
should we have both the dlaa mod checked in mo2 along with the dlss 4 mod?
you don't need to check the box in mo2. DLAA is activated in the CS menu
@@VRDaD i cant see preset j in the cs menu
@ the preset j is not in the cs menu, it’s in the nvidia inspector. You enable DLAA in the cs menu.
Is there a way to do this or an alternative on amd cards?
I have a 6900xt
@@TravisG DLSS is an Nvidia thing. Sorry about that. There is FSR available and CAS sharpening if you wish to use those, but the level of clarity is no way near to this.
Doesn't the new dlss have a bug with CS shadows? I had these super noisy grainy patches as my shadows when I tried it.
@@trunnellstaverntales6228 ehm…do you see any of those things in the video? Because I didn’t see anything like that.
Ill see if it's a community shader option I have, good that's it's not default
Do you need to check the square box next to the mod on mod manager btw? OH ok you say it at the end. Hope it works now.
@@Steelninja77 I kept you on the toes until the end. It was a cliffhanger 🤣
Only works on community shaders? Not ENB?
As far as I know…CS. But I am not 100% sure.
I was wondering, does this work for every VR game?
@@Shixay in principle, yes. Not the same process though. But the the Reddit post in the description explains you that
Does it give better performance? Or just sharper?
No performance impact for a much sharper image…I mean that’s kind of a huge boost in my book
@@VRDaD agreed. It is super sharp indeed!
Did you tell us what to do with the custom setting names file? I downloaded it... but what did I download it for, exactly? lol
That is the preset J basically. You just need to download it where the inspector is.
how much vram its using?
@@ryanllts around 19GB
which GPU do you need minimum for that CS?
@@zzjohnson5295 min a 3070, or 4060ti.
@@VRDaD ok nice, I have a 3080 :)
If this might mess up other DLSS games and nVidia is releasing an official driver on the 30th, then how do we uninstall this later so it doesn't mess up what is released on the 30th?
Please refer to thr Reddit post I linked in the description.
Just disabling it
How are you getting 90 fps, i have better specs, am using FUS mod pack, which is much less demanding than yours. And i only get 75fps with the new community shaders mod and godlike running. Before updating community shaders and addings dlss i was getting like 120fps in godlike. What happened?
@@L33tH4x0rGamer I made an entire video on performance, please check it out.
@@L33tH4x0rGamer new CS is more demanding. I was getting 120fps too. This time is impossible. Check my other video.
@@VRDaD thanks for the reply, will go check out!
@@VRDaDdo u always keep SSW on?
@ for 3.5 is a must, unless you want to play at 60 fps in the most demanding areas. I could get higher framerates going around, but I think that consistency is the most important thing so I recommend to keep SSW on.
can the same be done for fallout 4 vr?
@@shimigami92dk in theory is possible if you follow the guide on Reddit (link on description) but I haven’t tested it.
Is anyone else getting a virus mandatory download prevention from windows defender on the modlink 7.z file from ufile?
another user reported this as well. The file is safe.
You should set this as a profile for Skyrim VR in Nvidia profile inspector and not as part of your global profile
Can anybody confirm if with this your getting stuttering issues or is it just me?
would i need to disable DLAA with this? or do they just cancel one another out
No, leave DLAA enabled
@@VRDaD awesome, thank you! gunna give this a rip on my 4080s right now!
@ let me know if you need DLAA enabled. I have mine off, and noticed it was very sharp. Or am I losing my effing mind?
@ i just kept mine on as is but i feel like it looks way better. if loading MGO didnt take 5+ mins id test more lol
Thank you!!!
You're welcome!
Does this work with a 3080 ti?
@@Jimmy-nm4ut yes
I’ll give it a try on my 3090 and see if it works 🤞
@@andypacey9266 please report back!
@ sure, least I can do, remember I’m on 3.0 and setup as you described with CS and open comp, assuming this will be fine?
@@andypacey9266should be fine, yes.
Is this dlss4 fram gen or just dlss4 upscaling?
the dlls contain also frame gen, but I am not sure whether those are active in skyrim VR. I think it's only upscaling.
@@VRDaD Only upscaling, fram gen don t work in vr
Oh and thank you for the tutorial, tried it but without the mod , thx :)
would it work on gtx cards?
I don’t think so.
No, DLSS is using the tensor cores that only the RTX cards have. So 2000, 3000, 4000, 5000 series only.
Ciao! Sei per caso di Torino?
No 😊
How about fallout 4 VR ?
@@HyphenNope I haven’t tried it. You can try to follow the Reddit guide I posted in the description, if you have any luck, please report back!
Link doesnt work
which link? because no one so far said so
@@VRDaD the dlss link
@@malarkey0949 I rechecked. They all work. It’s you. Check your antivirus.
The one thing that always annoyed me was things more than 15’ away were always blurry no matter what. Less than 10’ great. Less than 5’ amazing. So you are telling me we finally have this problem solved?
I mean...you need to look with your own eyes!!!
My 4090 and quest 3 are extemely excited thanks!
I thought I was the only one with that issue! Ok heading in, this sounds 100% worth my time
Don’t work with the AMD graphic cards
@@denisparadis4963 Dlss is an nvidia exclusive feature. It’s not for AMD cards.
Ahhh, wow, holy "sheeep", my Goodness!🤣👍thanks again, DaD for another great Video!👌I like your italian accent so much (reminds me on a very good friend I have in italy!) - you give me hope that I can finally get this modlist run decent on my 3080Ti and save another 2.000,- bucks for buying a 5090?-is anybody here willing to share working settings for similar rig like Ryzen5800XT/32Gb Ram/RTX3080Ti ? THX2all!😗
@@fragman-1 thanks for your kind words. Check out my latest 3.5 performance guidance, I explain the process how to get to the optimal settings. And also some other further steps you could do to improve performance.
@@VRDaD Thx mate! I already watched, lowered CS to low, used open Composite,...etc.👍-everything was fine awaking in my house, but when entering i.e. "whiterun" I was watching a slideshow in 36fps ssw. Now, I have updated successfully to MGO to 3.5.1 a minute ago using "overwrite installation", now will try with DLSS4...🤞
Gonna try this today! Would I turn off FSR and DLAA then? Running a 4070ti on performance 90 fps ssw
No keep DLAA on. You don’t need FSR
@ got it thanks! Love your videos on Skyrim VR keep it up
😍👍
Is this REAL DLSS4 ?!
Didn't nividia say it can only run on RTX5000 ?!
@@b.s.7693 DLSS4 is not only for 5000 series. The exclusivity is the multi frame generation. This is real and it works also for 2000 series
@VRDaD ahh, ok
@@VRDaD Do you know if there will ever be support for multi frame gen in Skyrim VR?
@wvminecraftkid there is literally not a single VR game that uses it. VR users use ASW/SSW which you can use in any game.
Anyone wanna buy my 7900xtx?
😂this made me chuckle
anyone tried it on 3000 series ?
Time to upgrade, Buy 5090
Yes it is a big difference , running a 3090.
@@sezzce no point. I play 1 h every few days :P . and id rather spend money on traveling or other stuff .
3090 here too, running great, super sharp for distance :)
Please someone make a video that gives instructions on this as this guy never does good tutorials
@@ndoki9 I think 99% of people here found the instructions clear. But hey, you can always go somewhere else :)
If you've read the description, the linked reddit post, watched the video and you still need instructions...I'm afraid this may be a you problem and not a fault with the information given to you.
Is this for Skyrim or Skyrim VR?
@@donelkingii3738 Skyrim VR…as per title