i get literally half the fps in bo6 compared to mw3 with the exact same settings. mw3 i get around 240 but bo6 i get 120. 3080ti and 5900x, my friends are experiencing similar issues too, not sure what the cause is?
@TroubleChute I have tried open and moderate Nat I basically have a gateway to router so if I’m in port 1 I’m in bridge mode and it’s open and if im in port 2 im on moderate. In public match open is nice for a smooth less gameplay. In ranked. It gives me the most impossible hardest lobbies I mean im plat 1 against all d3s. Like on moderate it’s all plats all plats. So is changing the port 1 or 2 in the back of the modem lan port changing that often to change my Nat, it changes my ip is that ok? Or is that something that can get me in trouble. Its kind of a hard question im sorry
While I agree with most of the recommendations in this video, I would advise against using any kind of upscaling (DLSS, FSR etc.) and sticking to rendering at your displays native resolution. Any type of upscaling will potentially add latency. What I found to have the biggest impact on performance was the shader quality setting. Anything else than low caused serious stuttering on my system (7800X3D, 7900 XT). I suspect there is some kind of bug. Leaving this on low and otherwise using most of the settings as shown in the video is giving me (almost) locked 240 FPS at 1440p.
Does and far don’t add latency only frame generation under those will, if you use DLSS or FSR and turn off frame gen after that you’ll have low latency
Thanks for the guide! I have the same CPU and the CPU fix seemed to bump my lows by 20 and highs by 30 which is pretty impressive bump especially for just editing a few characters in a text file 🤣
Hey Today I was trying to play BO6 and went around Graphics settings and changed the Upscaling to "NVIDIA DLSS" but it changed back to Fidelity CAS everytime. Steps: Open the game Navigate to Graphics settings Select Quality Tab. Select "Upscaling/ Sharpening" drop down. Select NVIDIA DLSS Click Apply. Again open Graphics settings and select Quality tab "Upscaling/ Sharpening" value will change to Fidelity CAS
@@seanbisset8644 i tried updating my Nvidia drivers still same, but i observed one thing, the upscaling works fine in Campaign , when i switch to DLAA in campaign it remains DLAA , if i change to DLSS it remains the same. So this issue only happens in Multiplayer and zombies i guess
This game is really gpu intensive. I get 180-190fps in 4K max settings with my 4090 in MW3. But only 120-130 with the same settings in BO6. Which is crazy.
@raytharude7670 both WZ and MW3. Im pulling 180-190 FPS on Extreme settings, minus medium shaders and reflections. But BO6 is giving me 120-130 FPS which is crazy. I might have to play around with the Nvidia Control Panel settings or something.
any fix for high cpu temperature on r7 5800x3d ? í´ve got like up to 77 degrees in round. In the menu there is everything ok > up to 60 degrees. i use 4070ti super as gpu and it goes maximum to 60 degrees on high settings. i play with nvidia dlss and 180fps capped
Anyone been having the directx crash issue? Does this optimisation help with this issue since I run on a 4090 7800X3D and it’s bloody annoying.. happens at least 3x in my sessions
I have had (in the past, not for this game) to hunt down some poorly performing hardware/driver issues using something called "LatencyMon" to find causes of weird hitching like that. It might be worth looking up some vids explaining how it works to see if it might help.
Bro, the MP makes NO FN sense. I get 120/160 fps in SP, with almost max graphics, 1440p using DLSS + FSR 3.1 framegen (dlss framegen doesn't seem to be a thing in this game). It starts off very smooth and then I start getting the occasional microstutter, but nothing I can't deal with for a SP experience. Still, annoying. But in MP, it's horrendous. First off, DLSS straight up doesn't work. You pick it and it switches back to fidelity CAS. I found a solution (set DLSS sharpness to min) which keeps DLSS turned on, but it doesn't seem to do anything. Yesterday, I had horrible stutter no matter what I did. Even though I was getting 170/150, I lowered all my settings, nothing changed. Then I finally lowered my screen resolution to 1080p and it fixed the stutter for 99% and I got good frames (150/190). But I couldn't lock frames for some reason, it refused to lock the frames, this was on lowest settings.. Today I decided to fix it. Noticed the new Nvidia app wasn't adding cod or recognizing any new games. Deleted it, reinstalled it. It recognized the game. And then I verified and repaired Black Ops 6 through the xbox app. Restarted, my laptopt and had the setting optimized in Nvidia, recommended was 1440p with most things set to low. Ight, fine. play one game on that small map with a nuke on it. Incredible, zero stuttering, the GPU is no longer at a constant 100% and the CPU is now using a lot more (GPU is 60/80% while CPU is 60 now, was 12/30 yesterday). Less frames than yesterday but better performance. I Switch the private map (max bots) to this level with a lot of water, again, horrible stuttering but now my frames are also dropping as low as 70. Switch to 1080p, and it doesn't change much other than add like 10/15 frames Yesterday when I did benchmarks it showed GPU and CPU giving both bottlenecks at like 30/50% or whatever. Today however, the CPU is 99/91% bottlenecking, depending on options I've set. DLSS seem to work but no framegen. No matter what I do I can't seem to fix this damn game. And the worst part is, I remember playing this with the beta and it worked great. Every map ran smooth as butter, never really dropping below 120 fps. I regret even "fixing" it, because it didn't fix sh. At least yesterday I could go 1080p, everything low and play 150/180 frames, now that no longer works. It's more like 130fps with drops. The game is absolute garbage. What the hell man.
i9 13900k here, fixed my stuttering by enabling back my e-cores. tried multiple fixes but that is the only one that completely eliminated my stuttering
hey if you see this comment Microsoft store install has a different file location than players and its under xboxgames in ur drive i cannot find the txt file
Just fixed this. Open OneDrive -> Settings -> Sync and backup -> Manage backup -> Turn off 'Documents'. Also in-game, go to Account & Network and turn off "Clouded Settings". Should solve the problem!
thank for everything it helped me ❤ but i need one more help from you , in game it shows me warzone using 1.6gb but other apps using 2.4 gb ( nothing working background )
People like me who run ultrawide monitors (21:9) but want to use lower (16:9) for an FPS boost should use Fullscreen Exclusive and NOT Fullscreen Borderless. Fullscreen Borderless in 2560x1440 with give the same FPS as rendering 3440x1440, only in Fullscreen Exclusive will you get a boost. In my case an 18 FPS difference.
Same gpu it’s just broken on release, upscaling doesn’t work so use CAS on 100% it runs the same and looks way better, if you want more fps lower your render resolution or use dynamic.
also i figured out if you have nvidia gpu you can use both CAS (sharpening) and NIS (upscaling) at the same time if you enable nis in the nvidia control panel and change the display resolution within the game, its very good combo
DLSS seems broken in this game. Also, HDR looks absolutely TRASH, do not turn it on. I'm playing on a oddysey neo g8, It has incredible HDR with games that have good HDR. This game just seems to have absolutely garbage HDR.
@@atooq6283 Not to ego stroke here ether but people complaining about frame gen are doing it over placebo. I was pred n played apex professionally radiant in val and global in cs. But every new shooter i play with frame gen on and still compete perfectly fine. I DO however recommend only frame genning if u are at least hitting 100 fps.
@kaydon3917 apex didnt have frame gen when i played professionally n honestly didnt know it did now. My point is its placebo. Iv competed at the highest level in 3 games n still shit on ppl on cod with frame gen on all my ytshorts on cod r frame gen on. Frame gen doesnt add anymore input latency than vsync doee it simply holds 1 single frame to generate another inbetween meaning you might feel heavier input lag if your frame genning at a base 60 fps to 120 fps but im frame genning from like 200 just to push my cap to 300. I feel jo input latency. I feel the problem with frame gen is most low end users wanna use it when its not beneficial and a lot of people are uneducated on the topic and avoid it.
@@mossen98thank you, so many people are saying it’s so bad but when you’re running 70 fps it’s an 8ms increase and on 110 it’s a 4ms. No one will notice that.
Brother honestly thank you so much for someone finally doing a video I don’t have to play on x1.25 speed
comments like urs is why im watching
Thanks, this was so good. Added around 30fps and made the game look even better!
Feels great after changing to this settings! Thanks
Thank you so much! Really helped a lot, best of luck on the new game!
i get literally half the fps in bo6 compared to mw3 with the exact same settings. mw3 i get around 240 but bo6 i get 120. 3080ti and 5900x, my friends are experiencing similar issues too, not sure what the cause is?
same here, playing on my rtx 4060ti and getting around 120-160 fps, i used to get 250+ on mw3
I read that there is an issue with the new drivers and some software like Corsair icu..
@@dylangreeff954I'm over here with fucking 40 max lol
yea this game is horrible, i get 360 fps on xdefiant but i cant maintain 120 fps on this game lol
@@subjecters2060 you acting like it wasn't the same on cold war.
@TroubleChute I have tried open and moderate Nat I basically have a gateway to router so if I’m in port 1 I’m in bridge mode and it’s open and if im in port 2 im on moderate. In public match open is nice for a smooth less gameplay. In ranked. It gives me the most impossible hardest lobbies I mean im plat 1 against all d3s. Like on moderate it’s all plats all plats. So is changing the port 1 or 2 in the back of the modem lan port changing that often to change my Nat, it changes my ip is that ok? Or is that something that can get me in trouble. Its kind of a hard question im sorry
Performs good. Most demanding map(this green mostly) 166hz 160 locked fps without any drops. 1440p 4070s, r5 7500f. Without any txt config fixes.
While I agree with most of the recommendations in this video, I would advise against using any kind of upscaling (DLSS, FSR etc.) and sticking to rendering at your displays native resolution. Any type of upscaling will potentially add latency.
What I found to have the biggest impact on performance was the shader quality setting. Anything else than low caused serious stuttering on my system (7800X3D, 7900 XT). I suspect there is some kind of bug. Leaving this on low and otherwise using most of the settings as shown in the video is giving me (almost) locked 240 FPS at 1440p.
Does and far don’t add latency only frame generation under those will, if you use DLSS or FSR and turn off frame gen after that you’ll have low latency
Thanks for the guide! I have the same CPU and the CPU fix seemed to bump my lows by 20 and highs by 30 which is pretty impressive bump especially for just editing a few characters in a text file 🤣
Hey
Today I was trying to play BO6 and went around Graphics settings and changed the Upscaling to "NVIDIA DLSS" but it changed back to Fidelity CAS everytime.
Steps:
Open the game
Navigate to Graphics settings
Select Quality Tab.
Select "Upscaling/ Sharpening" drop down.
Select NVIDIA DLSS
Click Apply.
Again open Graphics settings and select Quality tab
"Upscaling/ Sharpening" value will change to Fidelity CAS
me too brother 😅
@@seanbisset8644 do you find any solution?
@VigneshKumar93 nope I just went with nvidia up scaling set to ultra performance..got an extra 20fps from that..best I could find
@@seanbisset8644 i tried updating my Nvidia drivers still same, but i observed one thing, the upscaling works fine in Campaign , when i switch to DLAA in campaign it remains DLAA , if i change to DLSS it remains the same. So this issue only happens in Multiplayer and zombies i guess
So I am not the only one facing this issue damn
Can u make guide on how to fix black ops 6 pc gamepass can't save progress and cod game settings
This game is really gpu intensive. I get 180-190fps in 4K max settings with my 4090 in MW3. But only 120-130 with the same settings in BO6. Which is crazy.
What are you comparing it to
I think he’s talking about wz or mw3
@raytharude7670 both WZ and MW3. Im pulling 180-190 FPS on Extreme settings, minus medium shaders and reflections. But BO6 is giving me 120-130 FPS which is crazy. I might have to play around with the Nvidia Control Panel settings or something.
@@kikodougies 130 fps mbn
It's just not optimized at all. Beta wasn't nearly as bad - they messed something up.
any fix for high cpu temperature on r7 5800x3d ? í´ve got like up to 77 degrees in round. In the menu there is everything ok > up to 60 degrees. i use 4070ti super as gpu and it goes maximum to 60 degrees on high settings. i play with nvidia dlss and 180fps capped
great video straight to the point earned a new sub thanks
Anyone been having the directx crash issue? Does this optimisation help with this issue since I run on a 4090 7800X3D and it’s bloody annoying.. happens at least 3x in my sessions
My PC is strugggling getting FPS drops randomly every 3 sconds and Packet Burst being nonstop on my screen.
Me too
same and i have a 4080 super and i9 1300kf
I thought it was my PC
Same here bro, what a mess this game.
I have had (in the past, not for this game) to hunt down some poorly performing hardware/driver issues using something called "LatencyMon" to find causes of weird hitching like that. It might be worth looking up some vids explaining how it works to see if it might help.
Bro, the MP makes NO FN sense. I get 120/160 fps in SP, with almost max graphics, 1440p using DLSS + FSR 3.1 framegen (dlss framegen doesn't seem to be a thing in this game). It starts off very smooth and then I start getting the occasional microstutter, but nothing I can't deal with for a SP experience. Still, annoying. But in MP, it's horrendous. First off, DLSS straight up doesn't work. You pick it and it switches back to fidelity CAS. I found a solution (set DLSS sharpness to min) which keeps DLSS turned on, but it doesn't seem to do anything. Yesterday, I had horrible stutter no matter what I did. Even though I was getting 170/150, I lowered all my settings, nothing changed. Then I finally lowered my screen resolution to 1080p and it fixed the stutter for 99% and I got good frames (150/190). But I couldn't lock frames for some reason, it refused to lock the frames, this was on lowest settings.. Today I decided to fix it. Noticed the new Nvidia app wasn't adding cod or recognizing any new games. Deleted it, reinstalled it. It recognized the game. And then I verified and repaired Black Ops 6 through the xbox app. Restarted, my laptopt and had the setting optimized in Nvidia, recommended was 1440p with most things set to low. Ight, fine. play one game on that small map with a nuke on it. Incredible, zero stuttering, the GPU is no longer at a constant 100% and the CPU is now using a lot more (GPU is 60/80% while CPU is 60 now, was 12/30 yesterday). Less frames than yesterday but better performance. I Switch the private map (max bots) to this level with a lot of water, again, horrible stuttering but now my frames are also dropping as low as 70. Switch to 1080p, and it doesn't change much other than add like 10/15 frames
Yesterday when I did benchmarks it showed GPU and CPU giving both bottlenecks at like 30/50% or whatever. Today however, the CPU is 99/91% bottlenecking, depending on options I've set. DLSS seem to work but no framegen. No matter what I do I can't seem to fix this damn game. And the worst part is, I remember playing this with the beta and it worked great. Every map ran smooth as butter, never really dropping below 120 fps. I regret even "fixing" it, because it didn't fix sh. At least yesterday I could go 1080p, everything low and play 150/180 frames, now that no longer works. It's more like 130fps with drops. The game is absolute garbage. What the hell man.
Anybody do the core thing does it work? And if you coulf explain why you should do that?
i9 13900k here, fixed my stuttering by enabling back my e-cores. tried multiple fixes but that is the only one that completely eliminated my stuttering
you put it back on 16?
@@GaryGucci after enabling all of my 24 cores back in bios, I put the document file to 16 for my renderer.
hey if you see this comment Microsoft store install has a different file location than players and its under xboxgames in ur drive i cannot find the txt file
same
Game keeps resetting graphics to default every time I open it :(
Turn off cloud settings on Online sections
It happened to me as well
Just fixed this. Open OneDrive -> Settings -> Sync and backup -> Manage backup -> Turn off 'Documents'. Also in-game, go to Account & Network and turn off "Clouded Settings". Should solve the problem!
Thorne and liberty full fps boost guide please!
thank for everything it helped me ❤ but i need one more help from you , in game it shows me warzone using 1.6gb but other apps using 2.4 gb ( nothing working background )
I cannot find the game file to optimise cpu. I am using the battlenet launcher. Any way round?
Is borderless better than fullscreen exclusive?
No, if you want to quickly switch between programs yes. But if you want the best performance, fullscreen exclusive is better
Thankyou sir!
People like me who run ultrawide monitors (21:9) but want to use lower (16:9) for an FPS boost should use Fullscreen Exclusive and NOT Fullscreen Borderless. Fullscreen Borderless in 2560x1440 with give the same FPS as rendering 3440x1440, only in Fullscreen Exclusive will you get a boost. In my case an 18 FPS difference.
Im having a lot of fps issues, i have a 7800XT and a Ryzen 5600X, i cannot pass the 110 fps.
what resolution if 4k thats normal you need to lower resolution
@@Caseohs-chair 110 normal on 4k?
@@MrUchiha yes but depending on your gpu and monitor you might want to do 1440p to have constant 140fps with no dips
Same gpu it’s just broken on release, upscaling doesn’t work so use CAS on 100% it runs the same and looks way better, if you want more fps lower your render resolution or use dynamic.
also i figured out if you have nvidia gpu you can use both CAS (sharpening) and NIS (upscaling) at the same time if you enable nis in the nvidia control panel and change the display resolution within the game, its very good combo
DLSS seems broken in this game. Also, HDR looks absolutely TRASH, do not turn it on. I'm playing on a oddysey neo g8, It has incredible HDR with games that have good HDR. This game just seems to have absolutely garbage HDR.
Agreed, DLSS seems alot more fuzzy and HDR is absolutely too dark on this game, I'm gaming on a odyssey g7
legend
i cant change the cpu cores in the txt document, my notepad just freezes
I cant enable variable rate shading while i have DLSS enabled :(
anybody else have grainy graphics for objects that are farther away
I got grainy on my gold camo and guns lol
Yes
Why would you tell people to use fsr in a shooting game when it gives input delay
fsr doesnt give input delay, fsr frame gen does, there is a difference, any type of frame gen adds delay. upscalers don't
@@atooq6283 Not to ego stroke here ether but people complaining about frame gen are doing it over placebo. I was pred n played apex professionally radiant in val and global in cs. But every new shooter i play with frame gen on and still compete perfectly fine. I DO however recommend only frame genning if u are at least hitting 100 fps.
@@mossen98Apex it isn’t bad but in cod frame gen and the input lag u can definitely feel and it’s honestly horrible
@kaydon3917 apex didnt have frame gen when i played professionally n honestly didnt know it did now. My point is its placebo. Iv competed at the highest level in 3 games n still shit on ppl on cod with frame gen on all my ytshorts on cod r frame gen on. Frame gen doesnt add anymore input latency than vsync doee it simply holds 1 single frame to generate another inbetween meaning you might feel heavier input lag if your frame genning at a base 60 fps to 120 fps but im frame genning from like 200 just to push my cap to 300. I feel jo input latency. I feel the problem with frame gen is most low end users wanna use it when its not beneficial and a lot of people are uneducated on the topic and avoid it.
@@mossen98thank you, so many people are saying it’s so bad but when you’re running 70 fps it’s an 8ms increase and on 110 it’s a 4ms. No one will notice that.
Thanks for effort but for me setting all to low is not optimization guide. And tbh game looks like poo after that :/
Even when I have vsync on I’m getting screen tearing
This game killed my FPS , went from 240 to 180
After changing my cpu core my game will no longer launch
do yu know how to fix directx error i get while playing or during loading time?
Why does fsr 3.0 not have frame generation anymore. i lose like 200 fps from mw3
same on me i go from 140 fps to 80
your games bugged i have mine
Frame gen?
educate yourself about it on youtube
Anyone else getting really low gpu usage?
I’m trying to get the worst this games lag is horrendous
turning everything to low its the cheapest/laziest guide ever dude....
Isnt fx cas the goat
Mine was on 3 vs 7 cores
My game keeps crashing and glitching
Have you managed to sort it as mine is crashing every time now and making me download all the shaders everytime I open the app
Went from getting 110 fps to 180 fps thanks to the Render worker count, shout out to you!
wow what a shocker, another poorly optimized cod.
how to turn off crossplay, am on PC and I dont want to play with aim assisted controller peasants.
Lmaooo most of em use controller on a pc get used to gettin cooked 😂😂😂
nice bait
@@boomer1327 🧢
oh no, your voice get deeper 😭
Keep everything on low and yay.... Waste of time
i think this game is just optimized poorly
100 fps at the end of the video 😂
This game killed the fps on top end gpus throw the whole fckin game away!!!
Imagine putting textures on low in 2024
He put texture settings on high in the video. You just need enough VRAM, like he said.
BOPS 6 with PTW audio, best settings is uninstall and refund.