Inverex Yukon II 3.5 KW Solar Inverter Complete Setting || INVEREX inverter complete setting guide

Поделиться
HTML-код
  • Опубликовано: 6 окт 2024
  • Inverex Yukon II 3.5 KW-24V Solar Inverter Complete Setting || INVEREX inverter complete setting guide
    To set up the Inverex Yukon II 3.5 KW-24V Solar Inverter, you'll need to follow the manufacturer's guidelines and adjust various settings according to your specific solar power system and battery configuration. Here’s a general overview of the settings you might need to configure:
    1. **Battery Voltage**: Set this to 24V, as the inverter is designed for a 24V system.
    2. **Battery Type**: Choose the type of battery you're using (e.g., Gel, AGM, Flooded) to ensure proper charging.
    3. **Charging Voltage**: Set the bulk, absorption, and float charging voltages based on the battery manufacturer's recommendations.
    4. **Charging Current**: Configure the charging current according to the maximum current rating of your battery bank and the inverter's capability.
    5. **Low Battery Voltage Alarm**: Set the low battery voltage threshold to protect your batteries from deep discharge.
    6. **Low Battery Voltage Cut-off**: Set the cut-off point where the inverter will shut down to prevent battery damage.
    7. **AC Input Voltage Range**: Configure the acceptable voltage range for AC input if the inverter is set to operate in grid-tie mode or when used with a generator.
    8. **Output Frequency**: Set this to match your region’s frequency standard (e.g., 50Hz or 60Hz).
    9. **Load Settings**: Adjust settings related to the inverter's load handling capabilities if needed.
    10. **Protection Settings**: Configure any settings related to over-temperature, overload, and short circuit protections.
    #inverex #solarinverter #settings
    you have any questions, please comment below the video. I will answer your questions.
    Thanks for watching this video.
    PLEASE SUBSCRIBE THIS CHANNEL FOR MORE VIDEOS

Комментарии • 8