How to check room switch Board || How to fix an electric switch socket dimmer at home

Fixing an electric switch socket dimmer at home involves a few steps. Here’s a general guide:
1. **Safety First**: Turn off the power at the circuit breaker to ensure there is no electrical current running to the switch.
2. **Remove the Switch Plate**: Use a screwdriver to remove the screws holding the switch plate in place. Carefully take off the plate to expose the dimmer switch.
3. **Inspect the Dimmer Switch**: Check for any visible damage or loose wires. Sometimes, the issue might be a loose connection rather than a faulty switch.
4. **Tighten Connections**: If you find any loose wires, tighten them. Make sure that all wires are connected securely to the dimmer switch terminals.
5. **Replace the Dimmer Switch (if needed)**: If the dimmer switch appears damaged or faulty, you might need to replace it. To do this:
Note the wiring configuration before disconnecting the old switch.
Disconnect the wires from the old dimmer switch.
Connect the wires to the new dimmer switch, following the manufacturer's instructions.
Secure the new dimmer switch in place.
6. **Reattach the Switch Plate**: Once the dimmer switch is properly installed, put the switch plate back on and screw it in place
7. **Restore Power and Test**: Turn the power back on at the circuit breaker and test the dimmer switch to ensure it’s working correctly.
#switch #sockets #dimmer
you have any questions, please comment below the video. I will answer your questions.
Thanks for watching this video.
PLEASE SUBSCRIBE THIS CHANNEL FOR MORE VIDEOS

[@EngineeringGuide-u8g]

بہت ہی اچھے طریقے سے سمجھایا اللہ پاک اپ کو ہمیشہ کامیابی رکھیں❤❤❤

[@RabiaAnasOffical]

Excellent explained ❤

[@Islamicvideos-z2f]

Bht zabardast ache sy samj a gya

[@MOJOS-w6g]

Excellent work for beginners ❤

[@gohartareen2015]

Great