Mazda 2009 Mazda 2, it has the same kind of light in the trunk, i was a bit afraid to change it because the Osram LED light i got was a bit too chunky and i didnt want to break it, but i'll be a bit more confident with it now, thank you for the video!
In my 2012 Mazda 3 hatchback, the polarity is + side toward rear of car for map lights, toward front of car for dome (central) light, and I think toward the plug side of the trunk light, make sure flip the led's around so they're shining away from you when you install it.
Do these LEDs use significantly less power than the standard halogen bulbs? My significant other has a tendency to leave the dome light on causing a dead battery.
Hi, we do have an installation video for your 2008 Mazda 3. Check out 2:35 in the video for instructions for the trunk light: ruclips.net/video/rMO4ZiqGv9g/видео.html
Simply put, the difference is the quality of products. I would expect our LEDs to last much longer, which we back with a warranty, as well as shine much brighter. Our new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V. Also, when purchasing with PrecisionLED, you purchase our support as well, as we are just a quick phone call, or short email away.
In this video we installed a 31mm festoon LED. You can find it here: www.precisionled.com/festoon-31mm-canbus-2-smd-led.html However, it does depend on the body style of your vehicle, so feel free to check with us before purchasing! You can reach us at help@precisionled.com
Excellent video. Very thorough and nicely recorded. Thank you!
We appreciate the positive feedback! 🙏
Mazda 2009 Mazda 2, it has the same kind of light in the trunk, i was a bit afraid to change it because the Osram LED light i got was a bit too chunky and i didnt want to break it, but i'll be a bit more confident with it now, thank you for the video!
Np, thanks for tuning in!
In my 2012 Mazda 3 hatchback, the polarity is + side toward rear of car for map lights, toward front of car for dome (central) light, and I think toward the plug side of the trunk light, make sure flip the led's around so they're shining away from you when you install it.
Thanks for the input!
Do these LEDs use significantly less power than the standard halogen bulbs? My significant other has a tendency to leave the dome light on causing a dead battery.
Thanks. Good post
We are happy to help.
Any tips on how to get the plastic edging back on the carpeted roof? Accidentally took that off before this video was uploaded.
How to install trunk light for Mazda 3 2008 sedan?
Hi, we do have an installation video for your 2008 Mazda 3. Check out 2:35 in the video for instructions for the trunk light:
ruclips.net/video/rMO4ZiqGv9g/видео.html
What kind of hood is that with the hood scoop? I have a 2012 Mazda 3 i touring 6 speed manual transmission and I was looking for a hood like yours 🔥
That is a Mazda Speed 3, thats why it has that style of hood.
Will this kit also work for a 2012 mazda 6?
+Becca Agunga No, you can find that package here: www.precisionled.com/mazda-6-led-interior-lights-kits-2009-2013.html
So, i see a similar kit on Amazon for $12. What makes this kit worth the extra $28?
Simply put, the difference is the quality of products. I would expect our LEDs to last much longer, which we back with a warranty, as well as shine much brighter. Our new Premium 5730SMD LED bulbs are the next generation of new LEDs. Compared to the older 5050SMDs, these LEDs have 3 times the light output per LED. The 5730 LED chip is designed for maximum light output while the aluminum housing helps to dissipate heat effectively for the longevity of the bulb. The new 5730SMD LEDs have a Constant Current Circuit design which helps maintain brightness if the voltage fluctuates within the circuit and has voltage surge protection up to 18V.
Also, when purchasing with PrecisionLED, you purchase our support as well, as we are just a quick phone call, or short email away.
Can you also make a video on replacing the front parker bulb to LED?
Yes, we will try to do one in the future!
Are they all the same type of bulb?
In this video we installed a variety of bulbs. Please check the kit linked in the description box for more details!
Mazdaspeed 6 next please including full beam conversion as it has xenon driving lights
Thank you for the suggestion. We will keep an eye our for a Mazda Speed 6 out here in Los Angeles for an installation.
Are the tail lights and the reverse lights you installed the 8000k or the 6000k?
The color temperature for the reverse lights used in the installation video would be the 6000K color.
How do you get the rear dome light casing back in . Had bass up tok loud
Please refer to 4:55 in the video!
what are the dimensions of the front interior LED's?
Hey! Check the videos description the link to our product is there, and should have specifics on bulb type!
Envian a españa? In to spain?
Yes, we do ship all over the world, including to Spain. We have an international shipping flat rate of 34.99 USD.
What did you use for the trunk light? I’m finding different types of lights
In this video we installed a 31mm festoon LED. You can find it here: www.precisionled.com/festoon-31mm-canbus-2-smd-led.html
However, it does depend on the body style of your vehicle, so feel free to check with us before purchasing! You can reach us at help@precisionled.com
Would this work on a 2007?
LET ME KNOW PLEASE!!
The installation process would be very similar, but you would use this kit: www.precisionled.com/mazda-3-premium-led-interior-package-2004-2009.html
Just fyi, but RUclips is blocking your video.
Wtf, my 2011 mazda 3 doesn't have a light