DeWalt FlexVolt Battery Pack Look Inside (Video #1)
HTML-код
- Опубликовано: 29 авг 2024
- In this video we take a look inside of the DeWalt FlexVolt pack to see if we can find the issue with it not charging as well as see if we can figure out the internal cell switch from 20V to 60V. Hope you find this video helpful and thanks for watching. I have some links to some of my favorite tools and items on my workbench and any links you click on does help support the channel and I greatly appreciate it.
Amazon Affiliate links to some of my favorite Tools/Items if interested:
Any links you click on helps support the Channel and I greatly appreciate it!
DeWalt Cordless Gyroscopic Screwdriver if needed: amzn.to/3Eevk8f
TOMLOV DM202 MAX Microscope if needed: amzn.to/3Uy0RIF
Cheap Spot Welder Board if needed: amzn.to/3WcRwWA
200MHZ Rigol DS1202Z-E scope if needed: amzn.to/35UVTLI
Weller 200W Iron if needed: amzn.to/30nzhT2
Hakko 888D Iron if needed: amzn.to/36TDWyv
Conical Bent Hakko Tip if needed: amzn.to/3B57IjD
ProStormer Hot Air Station if needed: amzn.to/3XIiKEY
Desoldering Gun if Needed: amzn.to/2SOTVIM
Extra Long Security bits if needed: amzn.to/3KVQNGQ
0-60V 0-5A Power Supply if needed: amzn.to/4158YzL
Similar to Drok DC-DC Converter if needed: amzn.to/3eUJZYk
Jewelers Screwdriver set if needed: amzn.to/3THDqwd
OFLA Locking Blade knife if needed: amzn.to/3BxMbSO
Pair of 3S 5.2Ah 60C LiPo batteries with XT-60 Connectors if needed: amzn.to/3UAl40e
WD-40 Contact Cleaner (Plastic Safe): amzn.to/2Yjo6e5
FlirOne USB C if needed: amzn.to/36VX1jn
Rigol DS1102E Scope if needed: amzn.to/35UVLvI
Atlas ESR-70 if needed: amzn.to/2QR1z4W
150W Load Tester if needed: amzn.to/30i8sn8
Board Holder if needed: amzn.to/3881akA
Northridge Fix Affiliate Links. Any purchase you make with below links helps support the channel. Thanks for your support!
NF AMTECH NC-559-V2 Flux 10mL if needed:
northridgefix....
NF Low Melt Solder PK of 6 sticks if needed:
northridgefix....
NF Premium Desolder Braid Wick if needed:
northridgefix....
NF Dual Head ESD Safe Hard Cleaning Brush if needed:
northridgefix....
NF Mechanic Tweezers if needed:
northridgefix....
Solder wire 100g 60/40 if needed:
northridgefix....
NF.Mini Soldering Pen if needed:
northridgefix....
NF V2.3 Microscope if needed:
northridgefix....
NF Universal Board Holder if needed:
northridgefix....
NF HEPA Fume Extractor smoke absorber if needed:
northridgefix....
NF Atten ST-862D Hot Air Station if needed:
northridgefix....
NF Grinding Pen with 7 tips if needed:
northridgefix....
Great job figuring out this strange battery system. One thing that this system allows DeWalt to do is ship the batteries on airplanes with less restriction. The shipping clip that comes with the battery separates it into three disconnected 2.0Ah batteries (it pushes the sliding switch in half way) so the wattage of each one is less than the allowed maximum.
Good explanation yes please on the repair video I have one of these and you never know when I will need to repair it thanks for your work
Good common sense explanation about operation. Yes, would be interested in seeing repair. Thanks for the look.
Awesome, thanks for your comment!
I would love to see the repair of this.
yes taking it apart is tough ripping everything out
i had one was going to do it but got busy
Yes! Battery video!
Definitely love to see this thing come apart but even better see it go back together without melting any pliers or cutters…..don’t ask me how I know these high density batteries can melt tools..😂😂😂
Would love to see a repair. Im having a problem were the battery is showing 3 bars of power but isnt working in the tool.
Thanks for the layout
Easy replacement just take your time and maybe take pictures just incase
Can you do a video in an Dewalt 9.0 battery? The pack assembly is a different from the 6.0.
If I come across one I sure will. Thanks for your comment.
I have a 40v DeWalt lithium ion battery. Wouldn't charge. Indicated 28 v on the multimeter. I tried the typical jump starting. Voltage went up to about 32 volts, but charger still wouldn't turn on. And I noticed as soon as I put it in the charger, it wouldn't "test" it first. Just immediately said no good. I took it apart and took some voltage measurements. Got different readings from different spots. I realized after examining it, there is a fuse or fusible link at the front. Testing on both sides would show 32v and 35v. Looked closer at the fuse, and it is apparently broken. Guess it's making some contact. I just bypassed the fuse temporarily to see what would happen. Put it in the charger and it started charging. Wondering if you've seen this before. And if possible where I can get a fuse for it . Have looked everywhere and can't find one. Looks similar to a bolt on Bussmann 70a fusible link. Thanks
I have not worked on the 40V DeWalt packs. I have had fuses blow on EGO 56V 5Ah packs before. Not the same style fuse though. I used a fuse link strip and soldered it in place on the EGO. Not sure if it would work for the 40V or not?
Similar to these? amzn.to/3yl4okI
@@ThriftyToolShed thanks for the response. I'll have to find something similar. It looks like a bolt on one, but where the holes are at each end of the copper tabs, there are heat shrink tabs melted over the holes, and the wires are soldered to each end of the fuse.
This diagnosis method is very effective. I have a 54v battery cannot be charged. After opening it, I found that a battery leaked, but after I replaced it, I found that it still could not be charged. The meter showed that the two interfaces of B- and ID were used. The resistance is 0Ω, please let me know is anyting i can do for this.
and i was doing test with good battery,B- and ID show 600Ω
I am not sure your brand here. Still if 600 ohm is good battery then I would see if you can trace out on the BMS board of this goes to a resistor or thermistor that could be the issue.
I also have a ECHO 58V pack repair video and I had to reset the microcontroller on the BMS for it to work correctly. You may want to watch it and see if it's similar issue to yours.
@@ThriftyToolShed ye,brand was dewalt and sell in australia, is almost same with you fix in de vido, I can not measure the components on the motherboard, they are all sealed by glue. Hope I can find inspiration in your other videos, the video you made is very useful.
@song gao
Yes, this pack also had a 600 ohm resistor on the board it had a marking of 76A, I read this by sticking my fine needle tip leads through the silicone potting and checking it! This potting can be removed but it seems more difficult to remove than the EGO 56V potting was. I showed the potting removed on this video.
ruclips.net/video/EH0GS0iUzzM/видео.html
Where can I get replacement plastic parts for this battery? Outer shell in other words...?
Other than eBay, I would not know of anywhere. The only other way would be if lucky 0 enough to find a bad one in the recycle bins at Lowe's, Home Depot or some other location that may have an out in the open battery recycle bin?
Please do I have 2 batteries that are not working
👍
where is number #2?
ruclips.net/video/DyAWp6jYnLk/видео.html
The video got out of order because of a RUclips upload issue. The last few minutes of the video would freeze and it had to be uploaded again after I realized the issue.