Evo X Intercooler Install on the Ralliart!
HTML-код
- Опубликовано: 21 окт 2024
- The Ralliart build is officially on its way and I'm starting it off right with the Evo x Intercooler and Ultimate Racing intercooler piping. Thanks for watching stay tuned for more on the Ralliart build!
How big is the coupler from the intercooler to the licp? Is 3in long enough?
do you have the link for the intercooler parts ?
Where are you located in PA? I am an hour south of Erie. I just purchased an Evo X turbo and manifold for my ralliart. I am going to need to do the evo x intercooler upgrade as well. Did you have to do any fabrication at all to get it to fit or bolt up?
Brandon Jacoby I live around erie Pennsylvania and the 10 intercooler bolts right up. If your close enough I'd be willing to help you out with the install
Car Talks With Cole thanks for the reply! I'm in the process of gathering all the parts for turbo swap. Might not be for a few months before I'm ready to install. Thanks for the offer and I'll hit you up if I need any help.
Brandon Jacoby ok sounds good. Good luck with the build the evo x turbo swap will be awesome I'm sure
like the red accents
The Snyds thanks man I wish the lower intercooler pipe was visible though
should you tune after swapping intercoolers or is it fine?
bodmon pj No need for a tune for the intercooler or piping is required.
Need to upgrade the bpv to a stock Evo or Tial
Already done! Thanks for the input 👍
Car Talks With Cole I figured more has been done since this was two years ago. How’s the IC holding up
@@premiumpandagaming intercooler is doing great. I've done a few mods since but not many. Just a corbeau race seat and ss brake lines. Still doing well all in all with 105k miles on it
Car Talks With Cole ive got an 09 stock with a tial bpv and that’s it. I’ve got maintenance I’ve got to deal with before I add more.
@@premiumpandagaming what's going on with it maybe I can help diagnose
What paint did you use for the intercooler?
Rival Blue I used vht for the face and I believe rustoleum high heat paint for the sides and pipes.
Do you have the stock ralliart bov hose connected to the l.i.c.p ?
youngbeezy96 yeah I used the stock one and everything fit up fine, even when upgrading to the x bov like I did they both use the same size bov piping.
Why intercooler is black?
I painted it black for both cosmetic reasons and improved heat distribution. I used a special high heat paint produced just for that purpose.
@@cartalkswithcole7258 that's a myth black paint does nothing
@@kyle79011 that may be true, I mostly did it for cosmetic purposes to match the intercom with the rest of the car. Thanks again for the input as it will help me to both improve my car knowledge and the channel itself.
Just get a boost pill and load a GST tune and thank me later
I would but I've already put in the 3 port boost controller and I don't think i have any of the stock fittings anymore :/