that has to be the hardest job ive seen you do .i would have had to turn that one down.no way you earned your money on that one.man i need a beer after watching that.a big thumbs up from tyler texas
Reece it was. I suppose it’s the old over engineered way. So much stuff to take out the top. And the bracket for the dog mount was literally underneath the gearbox.
The owner comes in at 27.32 to have a nose and a chat with kev, but kev's far to busy for small talk and all that cup of tea bollucks, ain't you kev, lol, so I'm just at just under 28 mins of the video and this seat is a load of work already, I mean, the hardest clutch I've seen kev do yet, phew, so kev how much is that milwalkie and what gloves are you using my friend, I asked you in a different video, but cannot remember which one, so I missed your reply, anyway a big up for kev for outstanding content, thanks kev 😘👍
Great video ,what socket types are needed around this job hex /torx/Allen etc. . PS nobody wants to do it coz its a pig,I'm almost 70 I'm up for it .Based outside your area .Thanks.
bonjour j'ai fait la même chose sur mon ford chapeau tu es bien plus malin que moi .tu n'as pas déposé le berceau .très très malin et très costaud vue le poids de la boite
Bonsoir pouvez vous me dire pourquoi les mécaniciens se cache le visage c'est une chose qui me surprend c'est bizarre travailler avec le visage dissimuler par une cagoule
Hi. I have a Seat alhambra 1.9 Tdi with 130 horses. I have problems with the radiator, my antifreeze is missing. Does anyone know how to change it? Does the front part of the car need to be dismantled? Does it go up and down? Any advice is welcome. Thank you in advance.
hello kevin believe you are doing a great job and you are doing a very difficult job with due respect. i have a question for you can you send me the link of the drill you used? great drill thank you
Hi, Just folloed your guidance and replaced the clutch in my sharan 2009.much appreciate your help, The issue is after finishing and bleeding the system, the clutch doesn't full gets separated from the flywheel so when pressing the clutch pedel cant change gears when engine on, but when engine off can select any gear and start the car with clutch pedel pressed , you feel a bit movement of the car like the clutch is still10% connected to flywheel, and when releasing the cluch the car drive but only on this gear and cant change it , Do you have any advice please.?
I have owned one of these on a 59 plate for 10 years now. Looking for someone do my fly wheel and cambelt. Its done 165,000 on the clock. Still going strong
J'aimerais savoir pourquoi vous cacher votre visage vous avez peur de quoi Ou vous faites un travail pas déclaré et vous ne voulez pas que l'ont vous reconnaisse ça ne fait pas sérieux
the benchmark English mechanic 👍🍻🍻💪
Congrats, as former mech, (I'm 63 now) is a pleasure watch you working, Like old school good mechs used to,a warranted well done job!
Airpods in, music on, and kevin is in his zone. Thumbs up from me buddy👍
SUPER film, takiego właśnie, krok po kroku szukałem. Świetna robota, BRAWO!
wow.............that box looked heavy, great work kev
Amazing video in great work ! Grettings from Slovenia
Greetings 🍻🍻🍻
that has to be the hardest job ive seen you do .i would have had to turn that one down.no way you earned your money on that one.man i need a beer after watching that.a big thumbs up from tyler texas
Reece it was. I suppose it’s the old over engineered way. So much stuff to take out the top. And the bracket for the dog mount was literally underneath the gearbox.
Amazing to watch and well done, them gearboxes are really heavy to put on by yourself and on axlestands too no easy feet.
Great job as always, as others have said, that box looked seriously heavy.
Sve pohvale za film
Nice video brother
Now that is a heavy gearbox
Приветствую вас! Удачи вам всегда 👍👌👏
Great job Kev! 👍
Grande Maestro
Gracias tío eres un genio
Great worker
Great job ! 👌🏻
Very helpfull video. Well done!!!
Super video thanks !!!!
Just watching kevin doing clutch replacement on a 2L TDI 140 Alhambra BRT engine code...like mine.
Great Job
Another detailed video by the ex rolex watchmaker.
The owner comes in at 27.32 to have a nose and a chat with kev, but kev's far to busy for small talk and all that cup of tea bollucks, ain't you kev, lol, so I'm just at just under 28 mins of the video and this seat is a load of work already, I mean, the hardest clutch I've seen kev do yet, phew, so kev how much is that milwalkie and what gloves are you using my friend, I asked you in a different video, but cannot remember which one, so I missed your reply, anyway a big up for kev for outstanding content, thanks kev 😘👍
I think I didn’t hear him as I’ve got an earphone in 😆
Milwaukee cost me about £700
@@WMCS £700 for just the gun and batteries? 😳 Or was it a set? I paid 400 for the same gun and 2 batteries and charger and case
Gracias
Отличное видео! Но работа на открытом воздухе иногда не комфортная
Great video ,what socket types are needed around this job hex /torx/Allen etc.
.
PS nobody wants to do it coz its a pig,I'm almost 70 I'm up for it .Based outside your area .Thanks.
Only 90k ? , My Galaxy (same engine and box) has 171k on original clutch and DMF , The thought of doing this job makes me drive it carefully lol
Thank You bro
Nice job mate!
How long did it take in real time?
class matey :)
جنود الله
Merci
مشاء الله
كل شيء له حكمة
Wah kayna ,
Dire dora la chaîne diali
bonjour
j'ai fait la même chose sur mon ford chapeau tu es bien plus malin que moi .tu n'as pas déposé le berceau .très très malin et très costaud vue le poids de la boite
Bonsoir pouvez vous me dire pourquoi les mécaniciens se cache le visage c'est une chose qui me surprend c'est bizarre travailler avec le visage dissimuler par une cagoule
Hi. I have a Seat alhambra 1.9 Tdi with 130 horses. I have problems with the radiator, my antifreeze is missing. Does anyone know how to change it? Does the front part of the car need to be dismantled? Does it go up and down? Any advice is welcome. Thank you in advance.
Front strut bearings have also gone 😢
Super job, but Can You write me total time of work with Seat?
Please sir brezaa clutch plate replace please next video
hello kevin believe you are doing a great job and you are doing a very difficult job with due respect. i have a question for you can you send me the link of the drill you used? great drill thank you
Milwaukee 1/2 impact hi torque version
@@qasimyousaf2867 thank you so much 😊
46:05
Damn... it looks heavy! well done.
Didn't you have any problems with the nut of the right swivel ball joint during reassembly?
Am sorry my technical english sucks.
I wanted to talk about the right lower ball joint!
Bloody hell Kev that looked like a pig of a job!
Hello Mister Williams, can you tell me how tall you are and how much you weigh, at the moment I don't dare to lower the box Regards
5ft10 and 75kg.. naturally lean and athletic. Box on average weighs 50-70kg.
Hi,
Just folloed your guidance and replaced the clutch in my sharan 2009.much appreciate your help,
The issue is after finishing and bleeding the system, the clutch doesn't full gets separated from the flywheel so when pressing the clutch pedel cant change gears when engine on, but when engine off can select any gear and start the car with clutch pedel pressed , you feel a bit movement of the car like the clutch is still10% connected to flywheel, and when releasing the cluch the car drive but only on this gear and cant change it ,
Do you have any advice please.?
Yes. There’s air in the system still.
Pump the pedal. Hold it down and crack the bleed nipple. Close the belted nipple and repeat several times
Engine lift is not necessery to remove gearbox ?
I don’t know. What do you think ..?
Very impressive. Please come do mine 😢
👏👏👏👏👏👏
How much does it cost?
www.williamsmobileclutch.co.uk 🇬🇧
Człowiek pajak 32:23
Hallo MR .Williams Mary Christmas and Happy no Jahr Michael Sippel West Germanya und bleiben sie Gesund ....
Thankyou and merry Christmas 🎄
Yip IL need spline sockets too .ok
коренной сальник не поменял эт плохо!
On average how many clutches do you change a week
Just 5 a week.
@@WMCS 5 a week is good going as you do it all from the ground. Keep up the good work 👍
I'm guessing he will be hanging up on the next customer that says they have the same car as this one! Looked a right twat of a job.
😂
Seher schon
Seriously heavy gearbox. Usually takes 3 people on a ramp 👏
They are quite a big lump.
Динамометрический ключь где?
👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻🇬🇧Ninja10🇬🇧👍🏻👍🏻👍🏻👍🏻👍🏻🍺
I'm kinda surprised someone would pay for a callout for this old clunker. Probably more than the vehicle is worth.
I have owned one of these on a 59 plate for 10 years now. Looking for someone do my fly wheel and cambelt. Its done 165,000 on the clock. Still going strong
Great cars a good one deserves expense of new clutch or anything else .Taxi 6seater for 5yrs Brilliant Bus ❤it
J'aimerais savoir pourquoi vous cacher votre visage vous avez peur de quoi
Ou vous faites un travail pas déclaré et vous ne voulez pas que l'ont vous reconnaisse ça ne fait pas sérieux
Ay ay ay Hubert
👍👍