Thank you so much for this video tutorial! Just finished building a Kraken 700 a few days ago and I'm using this same fbl receiver. I'm having the same bobble issue but dont know how to get rid of it. There are so many different tuning options in the Forward Programing menu I didnt even know where to begin. Gonna try some of your setting today after work. Just subscribed.
Thanks man! Yeah like I said this method of setup is different to me compared to the BeastX and other FBL units out there, but I am really liking this unit a lot. The menus are very simple with the forward programming. Keep up the good videos! I enjoy watching them :)
Thanks for this video. I am still a bit new to helicopter and there some language that I don't fully understand. When you are tuning with Forward Programming, there are the Proportional, Integrated, and Derivative settings. I cannot find anything in the forward programming documentation that explains what these parameters actually control. Can you explain, or perhaps even make a video that explains PID? Thanks
Hey Ethan great video! I'm tuning my Fusion and it seems to drift pretty aggressively when I nail the tail left or right. Does that have something to do with my cyclic? Also the tail seems to stop good when yaw left hard but when i yaw right hard it seems to stop then wag back a couple inches..
I know this is an old video but I'm still looking to buy this heli combo, its so cool.. You have an injury on you finger, did you get bit by one of your R/C helis or planes? Which is common in this hobby!!
Hi ethan, I am a 3d pilot with a 6250hx on my heli: my dual rate is at 100% and I feel my heli is not enough fast off my cyclic input to do smack 3d: where can I ajust that? In the manual, its suppose to have Cyclic response tunning! Both I dont find it! Thanks
One you completed the setup did you have any issue with your tail slider constantly going to one side of the shaft with out stick movements? As I’m acing that issue and not sure if that’s normal with this receiver or not. Thanks
Not whining - just clarifying: at the 7:00 mark you are adjusting PID to reduce 'bobble". You are changing the values in NORMAL mode...but you are flying in FM2. This seems wrong. Is it? Do the settings under NORMAL affect the flight performance in a mode *other than* NORMAL?
Yes it’s wrong, but idk if that was invented when this gyro came out. On one of the pages there is a value for gain and another. Set that to gyro and aux 2. Basically set it to whatever will make you see different flight modes in PID menu. Also, good luck, this unit is terrible.
Hi Ethan, Im confused. Just got a 3cell version of the (360 fusion) Flew it twice and ordered the 6 cell motor and pinion...lol Anyway trying to dial it in and TONY at horizon told me the AGILITY setting goes as follows (Higher the number the more AGILE it gets Less robotic) I want to feel it very locked in and connected ... SO explain the agility setting please. NOTE: The spektrum download for the model was HORRIBLE ...shakes and wobbles right out of the box...Slow and mushy collective, slow cyclic as well. hope the 6 cell is better!
@@EthanAter thank you for the reply. For Pitch it’s now : 85 85 7 Roll: 85 85 14. Increasing more make things very sensitive. Heli behaves like a dolphin , when punching hard it goes nose up, and as I bring it back the tail is already bent down . I also tried Agility from 20 - 100 range. Tried Advanced settings ‘pre-comp’ randomly from -20 till +20 but that didn’t do anything. Is there any setting (or combination of settings) mayb like the ‘tail drag compensation’ just like on the MSH fbl units !? Thanks .
Let me ask you also. Love the 270 but not a fan of the 636. Thinking about putting a ikon or brain 2. I saw your video flying the 270. What fbl is in that on of yours?
Thank you so much for this video tutorial! Just finished building a Kraken 700 a few days ago and I'm using this same fbl receiver. I'm having the same bobble issue but dont know how to get rid of it. There are so many different tuning options in the Forward Programing menu I didnt even know where to begin. Gonna try some of your setting today after work. Just subscribed.
Such great info man, i’m totally new to PID gains and this helped so much with my Fusion 360. Amazing flying as well, awesome!
Good info man. I am still finding the sweet spot with mine too. Nice flying.
Thanks man! Yeah like I said this method of setup is different to me compared to the BeastX and other FBL units out there, but I am really liking this unit a lot. The menus are very simple with the forward programming. Keep up the good videos! I enjoy watching them :)
Ethan Ater Keep it up. Horizon Hobby for life.
Much appreciated video, thanks!
Hi Ethan - Can I hire you for an hour to help me finish up my fusion 480?
Do you have a video on setting up the governor on this??????
Can you possibly post all the gain settings for the 480 stretch. I have a super combo kit on the way...?
Please do sir
Hi how do you turn up the servo speed up in the 6250 thx mark.
Sweet bro
Thanks for this video. I am still a bit new to helicopter and there some language that I don't fully understand. When you are tuning with Forward Programming, there are the Proportional, Integrated, and Derivative settings. I cannot find anything in the forward programming documentation that explains what these parameters actually control. Can you explain, or perhaps even make a video that explains PID? Thanks
That would be a good video to make,I would also like to understand all the different settings.
@@glenn4452same here
Your nice. I've watched this a few times
Hey Ethan great video!
I'm tuning my Fusion and it seems to drift pretty aggressively when I nail the tail left or right. Does that have something to do with my cyclic? Also the tail seems to stop good when yaw left hard but when i yaw right hard it seems to stop then wag back a couple inches..
Ethen you mentioned leaving us your final settings? Can PLEASE you post your final settings?
Yes sir,can you please give us your settings
Any chance you could send your setting for the dx9? I have basically the same setup im start to build this week.
Wow your great!!
I know this is an old video but I'm still looking to buy this heli combo, its so cool.. You have an injury on you finger, did you get bit by one of your R/C helis or planes? Which is common in this hobby!!
Hi ethan, I am a 3d pilot with a 6250hx on my heli: my dual rate is at 100% and I feel my heli is not enough fast off my cyclic input to do smack 3d: where can I ajust that? In the manual, its suppose to have Cyclic response tunning! Both I dont find it! Thanks
I want to ask, this fc6250hx helicopter flybars control system
One you completed the setup did you have any issue with your tail slider constantly going to one side of the shaft with out stick movements? As I’m acing that issue and not sure if that’s normal with this receiver or not.
Thanks
Ryonide A are you sure it’s not the gyro trying to correct? What happens when you move it back to center? Does it still want to move out?
Can you share your stock settings?
What are you're throttle curves
Not whining - just clarifying: at the 7:00 mark you are adjusting PID to reduce 'bobble". You are changing the values in NORMAL mode...but you are flying in FM2. This seems wrong. Is it? Do the settings under NORMAL affect the flight performance in a mode *other than* NORMAL?
Yes it’s wrong, but idk if that was invented when this gyro came out. On one of the pages there is a value for gain and another. Set that to gyro and aux 2. Basically set it to whatever will make you see different flight modes in PID menu.
Also, good luck, this unit is terrible.
Hi Ethan, Im confused. Just got a 3cell version of the (360 fusion) Flew it twice and ordered the 6 cell motor and pinion...lol Anyway trying to dial it in and TONY at horizon told me the AGILITY setting goes as follows (Higher the number the more AGILE it gets Less robotic) I want to feel it very locked in and connected ... SO explain the agility setting please. NOTE: The spektrum download for the model was HORRIBLE ...shakes and wobbles right out of the box...Slow and mushy collective, slow cyclic as well. hope the 6 cell is better!
Hello, I would like to ask, has this fc6250hx aileronless system been officially on sale? Where can I buy it.
JUN YANG it is available at horizonhobby.com :)
@@EthanAter Is it officially on sale? What do you think about flying feel? Can it surpass vbar neo?
Nice info.
My tail bends/banks down when I punch the heli up& down heavily. What optimization should I do !? My heli is mechanically setup fine .
Thanks! First I’d try raising the cyclic P gain. Sounds like it’s not quite enough
@@EthanAter thank you for the reply.
For Pitch it’s now : 85 85 7
Roll: 85 85 14. Increasing more make things very sensitive.
Heli behaves like a dolphin , when punching hard it goes nose up, and as I bring it back the tail is already bent down .
I also tried Agility from 20 - 100 range. Tried Advanced settings ‘pre-comp’ randomly from -20 till +20 but that didn’t do anything.
Is there any setting (or combination of settings) mayb like the ‘tail drag compensation’ just like on the MSH fbl units !?
Thanks .
Ethan A
Do you not have to adjust per flight mode? I have a 330 on a dx6.
Josh Wilson flight mode separate adjustment is optional. I have it set to the same numbers on all flight modes
Ethan Ater ok gotcha I thought so. I’m trying to learn this system also. Thanks !
Let me ask you also. Love the 270 but not a fan of the 636. Thinking about putting a ikon or brain 2. I saw your video flying the 270. What fbl is in that on of yours?
Josh Wilson it’s all stock with the 636👍
Ethan Ater wow ok then 😂nice
I don't know this fbl system. Compared with other mainstream fbl systems, it is better and feels better.
I threw 2 x v bars in the trash after buying these units,,,,,,, No shit