Home made sawmill from a old golf cart? works great. I can now afford to make furniture.

Поделиться
HTML-код
  • Опубликовано: 14 дек 2024

Комментарии • 1,1 тыс.

  • @AnMadreMor
    @AnMadreMor 7 лет назад +77

    Never could see the point of golf......way better use for the golf cart. Nice Job.

  • @tommygunfifteen
    @tommygunfifteen 9 лет назад +1

    How could anyone not like this video? It promises "go cart into saw mill" and delivers!

  • @mike-mr8ly
    @mike-mr8ly 9 лет назад +48

    I can't understand for the life of me all the thumbs down, I think what you did was awesome, I have nine acres and I am going to build one for myself.awesome video. Thanks

    • @exercisemyrights
      @exercisemyrights 6 лет назад +7

      mike
      all golfers

    • @matthewthibodeaux9830
      @matthewthibodeaux9830 6 лет назад +2

      Ever got around to building one?

    • @donaldhofman296
      @donaldhofman296 5 лет назад +1

      Golfers that wanted a golf cart!

    • @PaulSmith-gf6nr
      @PaulSmith-gf6nr 5 лет назад +3

      I'm with you on that. What could you find bad about this build. I think he is really talented.

    • @victorbunch7725
      @victorbunch7725 5 лет назад +2

      @@exercisemyrights Best use i have seen yet for a golf cart, Some people would give God a thumbs down if he come to get them in person,,, Stupid is un-fixable

  • @chennemeyer
    @chennemeyer 9 лет назад +1

    That is surprisingly simple and elegant in design, it just seems to work. I'm impressed, good designs are simple and this one is just that, very nice job.

  • @markp0177
    @markp0177  10 лет назад +116

    It took me around 8 hours to make and $280 worth of steel. The saw blade cost $68 with shipping and around $30 for the paint.

    • @bacalee
      @bacalee 10 лет назад +6

      Mark, that is incredible. Very good job, very intuitive, my co-workers are in awe with your ingenuity.

    • @markp0177
      @markp0177  10 лет назад +9

      ***** I am going to use the old fender wells as a blade guard.

    • @flysubcompact
      @flysubcompact 10 лет назад +10

      Dude, you are awesome. "Merica!" as they say. Clever use of resources.

    • @shaanangrey543
      @shaanangrey543 9 лет назад +5

      I want to make one, damnit

    • @pearlsclamchowder
      @pearlsclamchowder 9 лет назад +2

      +markp0177 What a smart idea. Enjoyed the video.

  • @garrettducat5769
    @garrettducat5769 9 лет назад +1

    That's incredible! It looks like it cuts really square.

  • @scotlandwoodwork2553
    @scotlandwoodwork2553 7 лет назад +4

    Best build of a homemade mill I've seen so far.
    Very well done.
    Thanks for sharing.

  • @Buzzwire
    @Buzzwire 4 года назад +1

    Very slick and ingenious. Awesome use of old golf carts and much better use of large trees. Our city had a ice storm a year ago and lost many large trees. It was sad to see them being used for nothing more than firewood.

  • @Goodwithwood69
    @Goodwithwood69 9 лет назад +53

    Best use of a golf cart I've ever seen!

  • @davestone7322
    @davestone7322 9 лет назад +1

    Lotta homemade sawmills on YT, this is the coolest and most creative in my opinion. I'm new to your channel so I have some catching up to do. 27 thumbs up.

  • @johnschubert4665
    @johnschubert4665 9 лет назад +41

    Put the track on a down slope with and auto shut-off switch (engine kill) at the end of the track. Start it up, ease it into the wood and go have a quick cup of coffee. Let the machine do the work or in this case let gravity have a hand at it. Guaranteed to work every time. It will be like having a free helper.

    • @markp0177
      @markp0177  9 лет назад +8

      That is a good Idea. Thanks

    • @solexxx8588
      @solexxx8588 2 года назад

      You still need to push or use a cable with a counterweight.

  • @hammockrooky
    @hammockrooky 10 лет назад +1

    Incredible, very ingenious. Way faster than the portable chain saw versions too.

  • @chesterwhitfield5734
    @chesterwhitfield5734 6 лет назад +4

    Mark this is one of the best videos I have seen yet. You are a true American. Like the old saying goes Necessity is the mother of invention. You are a great inventor. Mikko and Eric and lee are right Mark your ingenuity is to be saluted and it will inspire others keep posting your progress. We love it.

    • @markp0177
      @markp0177  6 лет назад +1

      Thanks for the kind words. Check out some of my other videos, I think you will like them.
      Mark

  • @iitra
    @iitra 9 лет назад +1

    Seen a lot of home mills but this just works so thanks for ideas mate 👍👍👍

  • @rizdalegend
    @rizdalegend 9 лет назад +11

    You sir, are a genious! I appreciate you showing the details of your build, while not making it an hour long explanation. I was happy to see this in my suggestion videos. Props for using a easy and cost effective golf cart as your base design. I see too many others try to repurpose a washing machine attached to a coffee grinder welded to a cast iron bathtub as thier DIY method... simple is better. Thanks for convincing me I need a gas golf cart now!

    • @markp0177
      @markp0177  9 лет назад

      Check out some of my other videos.
      ruclips.net/video/SKOgX0-4pCM/видео.html

    • @mickeyrhodes6557
      @mickeyrhodes6557 7 лет назад +2

      great video and fantastic idea and thank you for not adding a bunch of stupid headbanging music like other videos

  • @aroldfut
    @aroldfut 9 лет назад +1

    Always good to see someone make something useful from nothing but what's available and their creativity. So many people can't even change a lightbulb.

  • @markp0177
    @markp0177  10 лет назад +137

    Due to the high cost of furniture grade lumber I decided to build my own saw mill.

    • @AirspeedAdventures
      @AirspeedAdventures 10 лет назад +13

      I have been watching your channel for a long time now, and am very very impressed with your skills and ingenuity! I would love to see more detailed videos/descriptions on the mill superstructure/carriage. I am planning on building a sawmill and so far, your assembly appears to be the most straightforward while producing equal or better results. Great job Mark!!! -Josh

    • @scotts.2624
      @scotts.2624 10 лет назад +3

      That is nice. How long did the rubber tires last or are they still okay?

    • @markp0177
      @markp0177  10 лет назад +8

      Scott S. Their is no sign of any damage to the tires. I will be uploading a video soon cutting a log with a big knot in it and I will do a close up of the tires.

    • @ioccatonyz1
      @ioccatonyz1 10 лет назад +3

      Thanks for an idea, I am going to use a 18hp lawn tractor that will give me 5 speeds on the blade
      . I also like your pulley system...

    • @rdajdd
      @rdajdd 9 лет назад +2

      Tony Iocca Have you tried the lawn tractor yet?

  • @mrc6032
    @mrc6032 10 лет назад +1

    great idea. i have a lot of old small engines laying around. never thought of putting the blade around the tires. good idea. also whats great about it is that the log is stationary instead of the other way around. further it seems safer than conventional saw mill because your behind the business end. although i think the guy below has a good idea putting a fender well around the blade just for added safety. thanks for sharing!

  • @BrunoBsso
    @BrunoBsso 9 лет назад +4

    That is pure genius! Amazing job! Love it!

  • @troyharlow24
    @troyharlow24 9 лет назад +1

    Very impressed. Nice work. It's guy's like you that inspire me.

  • @jeffmclowry
    @jeffmclowry 7 лет назад +4

    I gotta say, of the videos I have watched, I like yours best.
    I, too, think tires are the best wheels to use.
    Thanks for sharing.

  • @Fallsculinary
    @Fallsculinary 9 лет назад +1

    How could there be 37 people who did not like this? This is about the coolest thing I've seen in a long time. Great job, Mark. I think I'll subscribe.

    • @bibbyman2
      @bibbyman2 9 лет назад

      The machine needs a shield for the blade. Blades break and can come off at the speed they are going. Extreamly dangerous.

  • @dantco
    @dantco 9 лет назад +9

    Great idea; outstanding execution; excellent workmanship! But, the best part is that you thought enough of us (who you don't even know) to share all! May your works reward you ten-fold.
    Thank you markp0177

    • @andrewevans9557
      @andrewevans9557 4 года назад

      Dantco, very well worded my friend. A humble, honest man, using his blessed creative talent. God bless you Markp

  • @kevindownes2118
    @kevindownes2118 7 лет назад +1

    The best homemade mill I've ever seen. Brilliant 👍

  • @90dcp
    @90dcp 8 лет назад +3

    OUTSTANDING! Thank-you so much for sharing this with all of us!!!

  • @jonnafry
    @jonnafry 9 лет назад +1

    Very ingenious use of resources and nicely executed. Results speak for themselves ... Bravo!

  • @LoneWoodpecker
    @LoneWoodpecker 9 лет назад +12

    Yes, Sir! You are the man to have around, when the SHTF. No doubt about it.

  • @SenatorFreddyQuimby
    @SenatorFreddyQuimby 9 лет назад +1

    Top notch engineering. sure you could've swapped the wheels out and used something purpose built, but you just used what it had, and it works so nice. and you made a great video of it. my hat is off to you, sir.

  • @alvin10388
    @alvin10388 9 лет назад +8

    What can i say...man you're a genius

  • @calebruttan9330
    @calebruttan9330 10 лет назад +1

    Very cool man....need more people like this in the world. Enginuity goes a long way

  • @corbinscharnhorst7415
    @corbinscharnhorst7415 8 лет назад +5

    Holy crap, this is awesome. I couldn't weld a piece of gum to a handrail, but I am inspired to make one of these!

  • @claybear000
    @claybear000 9 лет назад +1

    Great job on the saw and a very nice video. Love the gas tank,couldn't be simpler!

  • @dancarroll2049
    @dancarroll2049 8 лет назад +3

    Nice work ! can,t wait to see the furniture ...

  • @ronhargis2018
    @ronhargis2018 8 лет назад +1

    best one I seen so far an I used to own a norwood18. the four post was the deciding factor for me also, good job

  • @jcanivan
    @jcanivan 9 лет назад +17

    You are a genius Mark

  • @ATedK
    @ATedK 9 лет назад +1

    Nice job!-You might want to add two more tires above your current band tires. - What kills wide band saw blade are sharp turns and the stress/heat built up in the blade from those turns.There is a recommendation chart you can find at various band saw blade manufacturers that let you know the maximum width blade for running on different drive wheels.-Those tires look to be 10-12"? That would restrict band saw blades to maybe 1/2" width. With the other two wheels making a large circle you open the curve up to whatever you desire. Maybe 24" or 36"? -Great device, I love it!

    • @markp0177
      @markp0177  9 лет назад +1

      +Ted Kowalski Thanks for the advice. You are right. I don't cut that much wood a year. Just enough to keep me supplied in making furniture. Check out some of my other videos.Mark

  • @garyz8433
    @garyz8433 10 лет назад +3

    Great job! Look into how to quarter saw wood if you are going to make furniture. It means more rotating of the log but makes a far more superior cut of lumber. Also, build yourself a solar kiln to dry the wood. You'll end up with high quality, stable wood for your woodworking.

  • @patrysie71
    @patrysie71 9 лет назад +1

    That was some top class engineering right there. You are very modest with you effort and made it look almost too easy. The layperson out there might want to go and duplicate this and find out after a while that he's just making a mess.

  • @bobklimple7526
    @bobklimple7526 7 лет назад +4

    TOTALLY AWESOME BUILD!!!! DITTTO ON THE BEST USE OF A GOLF CART.

  • @szczepan4069
    @szczepan4069 10 лет назад +1

    mark....you've inspired me to get back and finish the bandsaw mill that i've started. !!! its been sitting formant for a year or so.....have been trying to get another project finished...so i know the bandsaw is next but still no room for both at the moment...great work!!

  • @aplavins
    @aplavins 10 лет назад +3

    Best video I've seen in a long time. Hope you make some more!

  • @lophole7
    @lophole7 9 лет назад +1

    Mark I think you should get some plans drawn up for this thing and sell them, I'd be the first to buy a set. That way you can fund other little projects. Great piece of work it is!!!!!!

  • @agentbertram4769
    @agentbertram4769 8 лет назад +12

    Brilliant! I love it. I'm now looking sideways at my Honda VTX1800 motorbike and making "Hmmm" noises...

  • @joshmyers4927
    @joshmyers4927 9 лет назад +1

    you can use idler pulleys from car engines for wheels, they are about the same size and have ball bearings. neat saw

  • @jimpinckard7891
    @jimpinckard7891 9 лет назад +3

    You would be a good metal fabricator as well as a furniture maker. I like it.

  • @averyjamesbrooks
    @averyjamesbrooks 7 лет назад +1

    Nicely done. Makes a nice clean cut too!

  • @GeorgiaRidgerunner
    @GeorgiaRidgerunner 9 лет назад +5

    outstanding great achievement ...did it work that flawlessly first time out...

    • @markp0177
      @markp0177  9 лет назад +1

      +David Yates Yes, first time.

  • @ajjrm
    @ajjrm 8 лет назад +1

    Incredible machine mate well done.

  • @AbcXyz-rn2lz
    @AbcXyz-rn2lz 6 лет назад +4

    Reminds me of my great grand parents one made from a tractor

  • @MADMANMUSICINC
    @MADMANMUSICINC 9 лет назад +1

    What an OUTSTANDING build!! Great design! By far the best design Ive seen of the home made saw mill.

  • @ChuShinTani
    @ChuShinTani 9 лет назад +4

    That was a great project and a great video! Thank you so much! Really outstanding job!!

  • @irenec8361
    @irenec8361 9 лет назад +1

    This is absolutely BRILLIANT! I am neither a carpenter nor a furniture maker, but just the title alone had me interested and what you've built here is fantastic!

  • @clockguy2
    @clockguy2 8 лет назад +3

    At first I was lamenting the loss of a nice fixable golf cart. Toward the end i was wanting a sawmill like yours. I was wondering how well your blade guide blocks are holding up? Early large blade bandsaws used wooden blade guides and a thrust bearing rear guide to much success and they were easily renewable.

    • @markp0177
      @markp0177  8 лет назад +1

      My blade guides are still tight. It was a hard decision to give up the golf cart but I am glad I did it. I make real furniture now.

  • @westleyjohnson1375
    @westleyjohnson1375 4 года назад +1

    The thought that you could do this and how efficiently it works just shows pure talent!!!! This was amazing to watch!

  • @Sctronic209
    @Sctronic209 6 лет назад +3

    Nice job 👍👍👍👍👍👍👍👍

  • @therealsparkman
    @therealsparkman 9 лет назад +1

    Genius MacGyver! Great mind and great fabrication. The only thing I would suggest is possibly safety covers for the blades and maybe an adjustable blade guide to adjust to the different log sizes. Just my opinion. But great project!! Thanks for sharing!

  • @kittylovor24
    @kittylovor24 10 лет назад +3

    Great job hope it serves you well.

  • @JCW418
    @JCW418 5 лет назад +1

    Impressive build

  • @lunarmation
    @lunarmation 9 лет назад +3

    freaking Excellent...
    thanks for sharing.

  • @andrewevans9557
    @andrewevans9557 4 года назад +1

    Nice job! I'll be looking out for an old golf cart! This is exactly what I've been looking for. Hats of to you.

  • @mikkosutube
    @mikkosutube 9 лет назад +28

    go spend four years in a classroom..then they will call you an engineer..but you could build a hell of a lot of good stuff in that time without the title!

  • @younggunz20
    @younggunz20 6 лет назад +1

    Wow, absolutely ingenious! That mill ripped right through the lumber with clean, quick, consistent cuts. Awesome.

  • @Parlusk
    @Parlusk 10 лет назад +8

    I saw you on America Unplugged several months ago, I wish they would have put you channel on the show. I found you by accident! Great videos!

  • @ronniestanley9090
    @ronniestanley9090 5 лет назад +1

    I used to build machine controls and we frequently worked for pallet companies. This design is how almost all pallet disassembly saws are made. They usually have a hydraulic jack with a pressure gauge for tensioning the blade. And, the tires were a bit bigger. They also used a 120vac actuator to adjust the table height. Its funny that this is the first time I have seen this design used for a lumber mill.

  • @ErikAnderson1
    @ErikAnderson1 9 лет назад +6

    Great Video Mark!!! Great mill, I used to do some milling with my father on a woodmizer and this looks like a great alternative.

  • @jonhoward9053
    @jonhoward9053 10 лет назад +1

    That is too cool! Very smart work, let me know how the furniture goes!

  • @kristiank1276
    @kristiank1276 8 лет назад +3

    how does the saw blade stay alligned on the wheels? i would have thought it would meander off the center as you pust through the lumber

    • @markp0177
      @markp0177  8 лет назад +3

      It has thrust bearing on the back side of the blade guides.

    • @kristiank1276
      @kristiank1276 8 лет назад +1

      ah, thanks, must have missed that part :)

    • @kristiank1276
      @kristiank1276 8 лет назад +1

      i applaud your ingenuity by the way. you have made a very efficient machine there

    • @stuartrowbottom8400
      @stuartrowbottom8400 8 лет назад

      Kristian

    • @seanmahony8824
      @seanmahony8824 7 лет назад

      Kristian K

  • @jerrynap1
    @jerrynap1 9 лет назад +1

    I have building from all sorts of materials for more than 30 years, many various inventions. That my friend is an absolute great job!!!

  • @nekbiodieselworks
    @nekbiodieselworks 8 лет назад +7

    choosing between having a golf cart as nice as that or a sawmill would be tough for me

    • @nekbiodieselworks
      @nekbiodieselworks 8 лет назад +5

      changed my mind I watched the video and I would take the saw mill

    • @colin-manyeates-clan5221
      @colin-manyeates-clan5221 6 лет назад

      why not both? All that is needed from the golf cart is the motor and wheels to ride on. The cart is already a frame and a manual break or pin in the one side will lock it up; add the guide and water and there it is mount four slots for square tubing to slide up and down and your lift on wheels and your done.. if need be mount a third wheel of any kind in the middle to take up slack, pin the steering. A rail could be mounted at an angle to affix another wheel bearing $12 at Tractor supply or any alternator, old broken tailor etc. When your done doing all the cutting the golf cart which you add extra low gear and maybe front wheel drive and a hitch can tow a cartload full of cut lumber back to the house from the woods on site milling you did.
      So your golf cart is your transportation to the tree with all the rails, attachments etc and a tailor with long expandable tongue to tow all that wonderful milled wood. I think Id put a few batteries and heavy duty cable or belt winches for moving lumber around best for milling
      ( ruclips.net/video/VAIs8VLFbls/видео.html ) ... Man you got me going now!! Gonna take an old riding lawnmower and make my own.. too much useful fun!!! For me though I'm using two electric motors and generator for sound reduction. For me less noise is best to enjoy the woods that much more....
      Great job!!! and it works so well!!! Well done!! Thank You! one of the best this week!.

    • @andrewporter4636
      @andrewporter4636 6 лет назад

      nekbiodieselworks. The next project, a golf cart that converts into a sawmill then back into a great looking cart,to dazzle the ladies no doubt.
      A absolutely fantastic idea mate,you first!

  • @ammoalamo6485
    @ammoalamo6485 5 лет назад +1

    Hole in one, you duffer you! That is a very clean project, very well done, no stupid parts re-done, looks fairly safe with the operator behind the saw. Good for you, old saw!

  • @RealityCheck41
    @RealityCheck41 8 лет назад +5

    Doubles as a zombie apocalyptic weapon, just make a truck mount

  • @bornagain631
    @bornagain631 9 лет назад +1

    Great job on the band saw. Very resourceful and shows a lot of ingenuity.

  • @TheChipmunk2008
    @TheChipmunk2008 9 лет назад +12

    63 people sell sawmills...

  • @meradu2
    @meradu2 7 лет назад +1

    This is Worth every penny nice work ,this is an inspiration for me thank you so much for shearing I just got my cedar 12'x 30" in the yard that I failed 4 years ago

  • @emivalalvesmadeira9690
    @emivalalvesmadeira9690 9 лет назад +3

    Engenhoso

  • @peteraugust5295
    @peteraugust5295 5 лет назад +1

    I dont know what it is, I haver never worked with wood much, but those DIY Sawmills get me every time. Awesome work!

  • @allanlavallee7171
    @allanlavallee7171 9 лет назад +1

    Top notch build. Probably the best use of a golf cart ever.

  • @skipjagger
    @skipjagger 9 лет назад +1

    Really cool! Thanks for sharing, people like you give me something to look up to!

  • @richardacheson9064
    @richardacheson9064 6 лет назад

    Nothing beats good old country engineering. Great job!!!!!

  • @MrPhillerup
    @MrPhillerup 9 лет назад +1

    Great job. You should get a lot of enjoyment out of that. Working with wood is great, and if it were me I would get as much enjoyment out of using it as I did in building it. I hope that makes sense.

  • @rogermulvaney9533
    @rogermulvaney9533 8 лет назад +1

    This is brilliant! It just goes to show, you don't have to spend a fortune on these super expensive specialised machines. I admire your ingenuity. Know how and self belief can go a long way. Bravo.!

  • @paulcannon7387
    @paulcannon7387 9 лет назад +1

    Hey Mark. Inspiring work, great job.

  • @28drafting
    @28drafting 7 лет назад +1

    Probably one of the best ideas for a bandmill I have seen, and I have seen hundreds. Great job!

  • @THOMASTHESAILOR
    @THOMASTHESAILOR 7 лет назад +1

    Nice work, I like the height adjustment system, You can paint a scale on one of the guilds, or maybe Graduations on the crank lever, and it's quick, easy and accurate.... The old Golf Cart has plenty of power, I'll bet it'll cut up an Oak, faster than you can shake a stick.....
    Now that you got plenty of free wood, you need to build a small roof over it, to keep the weather off it..

  • @edbeeinnv
    @edbeeinnv 5 лет назад +1

    Awesome job!!! I admire your ingenuity and fabrication skills.Thanks for sharing

  • @maico450
    @maico450 5 лет назад +1

    I admire your ingenuity and resourcefulness. It reminds me of my dad in that he could seemingly build anything he needed rather than buying something pre-manufactured. Keep up the great vids. I appreciate you skipping the boring and the tedious parts.

  • @arkansaswoodworking5913
    @arkansaswoodworking5913 9 лет назад +1

    This looks like something my grandfather would have built. He was born in 1899 and had a strong 6th grade education. However, he was a heck of an engineer. Your project reminds me of a lot of his. Awesome job, Mark.

  • @freedomwriterscafe1232
    @freedomwriterscafe1232 9 лет назад +1

    Thanks for posting! Great idea and great design. Looks like it is much better than the chain saw "mills" I've seen.

  • @markfryer9880
    @markfryer9880 9 лет назад +1

    Good job Mark.
    I liked the re-purposing of the golf cart, a very clever re-use of an item into something more useful. Usual concerns over the need for a top guard for the blade. Have you also considered mounting an electrical kill panic button?
    How are you finding the wear on the blade from cutting through the tree bark?
    Is it worth considering making some sort of de-barking lathe to prevent premature wear and blunting of the blade?
    Can I suggest that you paint the ends of your logs before you cut them to save the effort of painting them before stacking them to dry. The paint will help to prevent rapid drying of the ends which is one of the main causes of end splits.
    Or you could paint them after cutting and also paint the first 3" of all faces to help prevent splits. Splits are such an annoying waste of good timber.
    Mark

    • @markp0177
      @markp0177  9 лет назад

      Mark Fryer It only runs when I push on the gas petal so it has a built in kill already. I am still on my first blade. I do clean the outside of the tree with a water hose first to remove any dirt. I have only cut up a few trees so far. I will have to try painting the ends. Thanks for the tip.Mark

  • @kennethrosbury2819
    @kennethrosbury2819 6 лет назад +1

    Awesome idea I think it needs an adjustable guide slide on the blade so you can move the guide closer to the blade so there won't be so much tension on it when you're pushing I think it will work out way better

    • @markp0177
      @markp0177  6 лет назад

      Yes you are right, I have added a adjustable guide.

  • @thejackal003
    @thejackal003 9 лет назад +1

    From a Professional Pipe Welder and Prior Mechanic, You sir are the man!

  • @dondonaldson1684
    @dondonaldson1684 9 лет назад +2

    Awesome job, I never would have thought that an old golf cart would be so useful! Great fabricating.

  • @ChileExpatFamily
    @ChileExpatFamily 10 лет назад +1

    This is very nice. It looks like you have done a good job. We are thinking about buying a saw mill here in Chile so that we can build our own house here, since wood is the material choice in the South of Chile. We need to do at least 40 feet for our post and beam construction. but It could still be done with your design. Nice!

  • @jozsefsalagvardi7694
    @jozsefsalagvardi7694 5 лет назад +1

    This seems as a handy solution, but to prevent the vertical pillar and the horizontal consol sticking together, the rope movement devices should be synchronized. (For example with two fitted tubes what have to are flexible in each other. But if it possibly with a spiral axle or (on and off) electric stepping motors are better. And in this case you don't have to walk between two pillars for to lift and sink.)
    For to end I have a question: It seems that you didn't want to point that how do you solved the fixing of the saw dial.
    Well for this the saw dial has to be pressed for a bell form to provide space for the dial and the nut. ... And you transported it at 7.38 in a (wheel) barrow without direct protect.
    When the dial works it wears big load especially in the bent part and if you don't save it during transports it will break soon.
    What do you think , is this safe? Is this construction certified?
    Woodworking machines are dangerous You need to use it safely!

  • @LarrySbrusch
    @LarrySbrusch 6 лет назад +1

    I subscribed to your channel and hit the like button..I built a sawmill myself about a year ago and it was a lot of fun to build and use..I was wanting to put a collection of homemade sawmill builds in one video and was wondering if I could add yours to the collection...

  • @kylestutzmann809
    @kylestutzmann809 9 лет назад +1

    Very nice ingenuity! I would love to have one of these on my property! Make sure to post some of your woodwork.

  • @cognitor900
    @cognitor900 9 лет назад

    Wow!! Tip my hat to your engineering, fabrication and thriftiness skills. Looks really square and true and gives a great bandsaw cut.
    And wow again!!!

  • @arcturusbbqsausagemaking2435
    @arcturusbbqsausagemaking2435 9 лет назад +1

    That is an awesome idea great steel fabrication im a retired welder fabricator getting into wood working in my spare time, cant wait to see the projects you do next keep the vids comming.

  • @btchhopperou812
    @btchhopperou812 9 лет назад +1

    When you crank the winch up/down.... that seem to tucker you out pretty quick lol. Maybe you should hook up a Warn or HFT electric winch(some are R/C too). BTW- Great fab job!

  • @daemonjeep
    @daemonjeep 9 лет назад +1

    Love it!!! Awesome idea, and yes it works well!!!!