I am just in awe of the skill this man has.. Eventho it’s not all flawless, he did convert and “rebuild” a whole car, just to be able to relocate his plant.. 😅 you have to be able to pull it all of in the end !! Awesome build❤❤
That reminds me of earlier in the 70s, when we welded rusty cars like this back together in Germany... but we had to go to the technical inspection with it... installing the rims the wrong way would have been an absolute absurdity... even though the colleague acted very brutally, but still he deserves a medal for welding with electrodes...all respect! 🥇🏆... we used acetylene and oxygen for welding, until the mig mag or the wire welders came up. he did a lot of work, disassembled everything... he could have worked a little nicer... but he's still a talent👌😎
You are very polite. I respect the time Mr.Hô engaged into this conversion/restoration BUT it is not a proper work. In the mad Europe, the German TÜV would NEVER APPROVE this car. To me the worst about this car is the suppresion of structure bars in the trunks.
@@alexandrhrouz666 Early in the 70's doesn't mean "today". Nowadays, it is not about the police but about the official check to allow your car on the roads.
Một trong những kênh RUclips đáng xem nhất Vn nhưng hầu hết khán giả đều là người nước ngoài vì sao? Vì nước ngoài thích tài năng khoa học kỹ thuật sáng tạo chứ không phải những cái vô bổ câu like câu view
Vì người nước ngoại ko có thợ lặt vặt như vn. Bên mỹ làm gì cũng phải có bằng. Ko như VN. Lên họ ko biết sửa chữa lên thíc xem video này. Vn thì đầy việc bạn thíc học sửa chữa oto miễn phí cũng có
1) как заменить в случае дтп задние фонари 2) как заменить в случае неисправности задние стойки 3) ручку задней двери можно было заварить, и зашпаклевать 4) зазоры на задней двери можно было сделать тоже самое что и с ручками 5) развернуть колеса и установить странное решение Есть много недочетов я так понимаю авто было сделанно только для контента. Но многие и такое не смогут сделать.
Welding sheet metal with a stick welder isn't easy. It looks great, however, I am concerned about the rear shock towers not being strong enough. How do you plan to get at the mounting nuts now that they are covered with fiberglass?
This is pretty amazing. And I say this as someone who worked around body shops selling PB&E for years. I've seen a few conversions of this type done, and the only thing I can say that I would do differently would be a little stronger material at the top of the rear shock/strut towers and a heavier box system to tie the two upper rear towers together (probably a u shaped box to go under the rear window, with a couple of pillars down to the floor "frame"). Without it, I see some flex issues on the body/chassis, but overall it's amazing. I see some rust I would have cut out replaced as well to make it structurally stronger, but overall, I get the "where do I stop" question on an old beater like this... Also, MAD PROPS for using the stick welder on your sheet metal!
That is all you would do differently? Running those wheels backwards on cut up lug nuts is crazy. The strut towers yes need a heavier gauge material and bracing. The rear door latches were removed and not shown to go back in. Welding and filling in the rear door handles and rear door seam needed to be done as well to finish off the strength of cutting the rear structure completely out. Re bracing of the rear deck to the back of the car needed to be redone or kept in place.
I like the conversion a lot! Excellent planning, but I see that the turning is going to be an issue. Also the rear door handles and door gaps could have been filled at one point to where it would look like a factory offering.
@@franksanta-teresa971 also how does he adjust the rear shocks because it appears he fiberglassed over them, they should be covered but made a removable cover for repair
NO D.O.T (Department Of Transportation) regulations we love 3th World Countries.. Just paying for tags once..free rides for ever.. ahhhhhh.. Much love from USA United States of America ahhhhhh
El Corolla Avila Uno De Esos Carros Que En Mi Pais Venezuela Son Un Patrimonio Rodante Estos Son Confiables,Divertidos,Faciles De Manejar Y Reparar Y Seguros Hoy En Dia Estos Autos Son Unos Clasicos Rodantes Que Aun Siguen Circulando Y Dando Batalla
Прикольный пепелац получился, по дешману пойдёт. Но я бы заварил задние двери, убрал бы задние внутренние арки заменив пружины на торсионы, тогда бы и погрузочный объем бы увеличился. Заменил обычный ручник на электро ручник, тогда бы можно было поставить задний диван в салон вместо двух седений. Для мультимедиа сделал бы подиум и перенёс бы наверх вместо часов.
Nice idea 👍 Shame the rear towers didn't get reinforced, and then get completely covered with fibreglass! Lots of issues, with body, suspension, steering, even those rear lights are half done... Nice idea, just a bit rushed.
Don’t you recognize that all tool and equipment he have is : grinder , welder , antique hammer , and some very basis tool ? The point is he did an amazing job with what ever he has on hand which nothing .
Good job Mr ho I weld and fabricate trailers myself and I much appreciate how you do your videos all the process at once as compared to seeing months worth of videos in real time it is better for me to see the entire process in a timelapse version
I'd use the trunk lid and the piece of the roof to make a removable tonneau cover for the new bed. also since the bed seems to be water tight you might want to drill one or two small drain holes at the lowest end of it for rain and any spills.
not downing him in this video and (Imm not good at that stuff ) but the door handsfor the back and the back door outline i would of try to bondo all of it where it look more cooler like it was really made like that but thats cool little truck
As always, your work is nothing short of amazing. You put a great deal of hands on engineering into your work, and the level of ability & knowledge is simply priceless. I was hoping the rear doors would have been sealed up to look like a factory ute also, but if it was intended to identify a modified sedan, then i get it 😁well done bro, fantastic job. Here in Australia, unfortunately, it would never pass an engineers modification certificate. There is a big list of structural compliance and requirements that must be met before they even look at the project. But who cares, You're not in Australia 😂
@TinNongTheGioi-ex9es we have a lot of professionally modified cars here in Australia my friend. A lot of awesome engineers here also, and non qualified professionals. Car mods, engine upgrades we are also very passionate about. I just love watching this guy build stuff from scratch on his own. Although I know a lot of this stuff is done behind the scenes, I still love watching it. Makes me want to build more stuff too 😆
Тачка металлолом, побыстрому решил продлить ей жизнь не на долго и просмотров срубить за одно, с их влажным климатом она за 5 лет в труху рассыпется после такого "ремонта".
love the work , love the ingenuity . But please anyone watching DO NOT copy this lug nut /spacer design for anything but slow off road use . Extremely dangerous and likely to fail at any moment . Anything over 20mph and this car will start to shake itself to pieces from those lug nut extensions .
Check out Merlin’s Old School Garage channel. He took a Volkswagen Jetta and made a ute. He used a kit. It’s pretty interesting. Here in the states, we don’t see that much. However, I would drive one. Cool looking trucks….
Mr Ho you did it again beautiful work and a great imagination. Thank you for your time and I'll be waiting for the next video keep it up and God bless you sir.
Fantastic transformation and effort :) I just would have added some tie-down points in the back to secure loads safely. Also a drain hole somewhere with all the rain you get :)
Gorgeous! Really enjoyed the yellow color. Even though the black and white "dream" at the beginning showed the design, that yellow was a beautiful surprise when you started painting!
I appreciate the time to retrofit this vehicle and make the video. Yes there are things I would do differently, but well done, keep improving. Blessings from the Caribbean.
My grandpa did basically the same thing to an old four-door sedan he had years ago when I was a kid. The main difference is he left the back doors where they opened. That way he could load stuff from the side without lifting it over if he had to.
this was an amazing build but someones gotta say it. you cut corners on the rust on that car and its gonna bite you in the rear. you left metal with surface rust and unfixed rust holes in the wheel wells. if you're rust mitigating phoshric acid works great but if you don't have access to it vineger, acidic toilet cleaner, or citric acid will also work.
I like it alot man your work is amazing! If i might suggest weld that door full so there is no more door line, and remove handel and also make it smooth. That way it would look more like one panel. Its only my personal opinion, but like i said man great work!
для первого раза отличный результат. учитывая то, что всё делалось на глаз, на коленке. вот только как менять задние стойки? хотя, судя по видео с лодками, это пробный вариант. надо ждать продолжение. паренёк неугомонный, респект и уважуха!
If you had the hatch 4 door, or the tailgate from a Corolla FX, you could make a gate to extend the bed into the passenger compartment for larger items. My family had an 84 Corolla back when it was brand new. I had an 88 FX AE88.
I really like the way it came out, just be aware that running your wheels like that puts a lot more stress on your wheel bearings as well as some differences in handling.
@@nostreamavailable9090 or weld two rims together, have you seen the guy from russia building the cyper punk car, you should check that out its pretty cool.
Awesome!! Love seeing stuff like this and your really the only one I've seen doing it. Maybe you should update along the way? Just do extra stuff to it and post videos. I know me and a lot of others would love to see it. But great jib man!! I'd drive it and use it all the time !!
Надо было еще в кузове обои поклеить 😁😁😁 а вообще по хорошему, после того как разрезали крышу, оставалось разрезать только пол, ну и выкинуть 😁😁😁 а так конечно парень молодец! Горшки с цветками возить можно 😁😁😁👍🏻👍🏻👍🏻
I think he cut too many corners here compared with his previous video where he restored an engine from the bottom of the ocean. Things he can work on are.. 1) restore the engine bay 2) install a back up light 3) roll out the fenders to cover the wheels 4) cover up the rear door handles 5) lift the front of the car 6) clean the suspension parts.
You did a fantastic job there sir, very very well done 👍 The only thing l wish you had done was remove and shave the redundant rear door handles and welded up the rear door gaps 👍 Best wishes from the north west of England and god bless you and yours 🙏🏻❤ Jay
Bảo sao kênh toàn người nước ngoài coi. Người nước ngoài họ coi trọng nội dung sáng tạo, sự khéo léo trong kỹ thuật cơ khí làm ra những sản phẩm độc đáo đầy thú vị. Người xem Việt Nam hiện nay đa phần lại là phụ nữ và đám nhóc ác đam mê toàn thứ rác rưởi hèn chi nội dung của kênh này không được đề xuất nhiều! Respect you!Content creator good for life
Chuẩn bạn, nãy tui cũng xem kênh một ông kia cũng v, kênh Việt Nam luôn mà toàn người nước ngoài khen, mấy ông Việt Nam vô chửi xối xả, k hiểu kiểu gì. Đúng nhân tài ở VN k thể sống đc, ra nước ngoài mới phát triển đc @@
Ok Mr. Ho this one is wild! Really Cool great job! LoL I'm so busy myself, I'm actually watching two of your shows right now at the same time trying to catch up😂🤣😂🤣😂 keep building my friend!
It's a Toyota? It has at least another 100,000 miles worth left in it as long as you stay ahead of the rust! Nice job on the conversion. Can't imagine doing all of that with a stick welder and dark sunglasses.
Great conversion. Generally, I really like the finished car. I would have done a few things a little differently and would have strengthened it in a lot more places
Аплодирую стоя! Красавчик!🎉🎉🎉уникальный молодой человек, знает авто как пять пальцев, от электрики до кузовщины.
Но делает ×уйню
I am just in awe of the skill this man has.. Eventho it’s not all flawless, he did convert and “rebuild” a whole car, just to be able to relocate his plant.. 😅 you have to be able to pull it all of in the end !! Awesome build❤❤
That reminds me of earlier in the 70s, when we welded rusty cars like this back together in Germany... but we had to go to the technical inspection with it... installing the rims the wrong way would have been an absolute absurdity... even though the colleague acted very brutally, but still he deserves a medal for welding with electrodes...all respect! 🥇🏆... we used acetylene and oxygen for welding, until the mig mag or the wire welders came up. he did a lot of work, disassembled everything... he could have worked a little nicer... but he's still a talent👌😎
amazing indeed :) well done
You are very polite. I respect the time Mr.Hô engaged into this conversion/restoration BUT it is not a proper work. In the mad Europe, the German TÜV would NEVER APPROVE this car. To me the worst about this car is the suppresion of structure bars in the trunks.
I've allways thought the german police was very strict about vehicle condition. This sounds like a sci-fi to me
@@alexandrhrouz666 Early in the 70's doesn't mean "today". Nowadays, it is not about the police but about the official check to allow your car on the roads.
@@alexandrhrouz666how did WV car pass the emission tests ? Lol
Một trong những kênh RUclips đáng xem nhất Vn nhưng hầu hết khán giả đều là người nước ngoài vì sao? Vì nước ngoài thích tài năng khoa học kỹ thuật sáng tạo chứ không phải những cái vô bổ câu like câu view
Vì người nước ngoại ko có thợ lặt vặt như vn.
Bên mỹ làm gì cũng phải có bằng.
Ko như VN.
Lên họ ko biết sửa chữa lên thíc xem video này.
Vn thì đầy việc bạn thíc học sửa chữa oto miễn phí cũng có
Ijlv9087😊😊😅😮😮😮😢😢0😢😢😮😅😊
4ty ff 😮😅
Kjjk7980
❤is 🎉❤🎉6 😢ri
Chỉ vì chở 1 cái chậu cây mà mất bao công sức và tâm huyết làm nên chiếc xe, khâm phục bác tự làm từ A-Z mọi công đoạn. Thuần thục các kỹ năng
1) как заменить в случае дтп задние фонари
2) как заменить в случае неисправности задние стойки
3) ручку задней двери можно было заварить, и зашпаклевать
4) зазоры на задней двери можно было сделать тоже самое что и с ручками
5) развернуть колеса и установить странное решение
Есть много недочетов я так понимаю авто было сделанно только для контента. Но многие и такое не смогут сделать.
Зделано на отьебись,таким мастерством многие азиаты в ютубе страдают ,вечно по верх ржавчины красят
Согласен полностью, хотя бы разварки сделал, а не это убожество, видос чисто просмотры срубить
Он сделал для себя и как ему захотелось + на коленке грубо говоря. У него хотя бы инструмента дофига@@lexdrive3127
Ещё и внутри арок дыры от коррозии оставил сквозные😁
@@lexdrive3127 а ты Вася что сделал? На СТО 2/2 работаешь?
Welding sheet metal with a stick welder isn't easy.
It looks great, however, I am concerned about the rear shock towers not being strong enough.
How do you plan to get at the mounting nuts now that they are covered with fiberglass?
These builds are like Bic lighters, when it wears out you throw them away.
Angle grinder, inspection, more fibreglass... The whole build only took half an hour...! : )
У чувака есть плазменный резак, но нет полуавтомата?! 😂
80系カローラ。もう30年以上前の車なのにきちんと整備すればまだ動く。というトヨタ車の耐久性の高さに加えてそれを配送車として活用してしまう動画作成者の手腕に感動しました。
テールが８６みたい
Muy lindo su corollita el que tiene un Toyota sabe lo que tiene desde costa rica 🇨🇷 saludos amigo
He doesn't post often , but when he does you know something cool is gonna happen
This is pretty amazing. And I say this as someone who worked around body shops selling PB&E for years. I've seen a few conversions of this type done, and the only thing I can say that I would do differently would be a little stronger material at the top of the rear shock/strut towers and a heavier box system to tie the two upper rear towers together (probably a u shaped box to go under the rear window, with a couple of pillars down to the floor "frame"). Without it, I see some flex issues on the body/chassis, but overall it's amazing.
I see some rust I would have cut out replaced as well to make it structurally stronger, but overall, I get the "where do I stop" question on an old beater like this...
Also, MAD PROPS for using the stick welder on your sheet metal!
In places like Asia no one there has much money but they have sometime some tools and are afraid to take on job like this
That is all you would do differently? Running those wheels backwards on cut up lug nuts is crazy. The strut towers yes need a heavier gauge material and bracing. The rear door latches were removed and not shown to go back in. Welding and filling in the rear door handles and rear door seam needed to be done as well to finish off the strength of cutting the rear structure completely out. Re bracing of the rear deck to the back of the car needed to be redone or kept in place.
I like the conversion a lot! Excellent planning, but I see that the turning is going to be an issue. Also the rear door handles and door gaps could have been filled at one point to where it would look like a factory offering.
I thought the very same thing. Also he did not make any provisions for drain holes for the bed in the event of rain...
yeh i would have welded them up
@@franksanta-teresa971 also how does he adjust the rear shocks because it appears he fiberglassed over them, they should be covered but made a removable cover for repair
NO D.O.T (Department Of Transportation) regulations we love 3th World Countries.. Just paying for tags once..free rides for ever.. ahhhhhh.. Much love from USA United States of America ahhhhhh
I like the fact he left the handles and gaps! if he filled them in, who would have looked twice thinking its just another mini truck..
Lột cái sàn ra nhìn chán luôn, nhưng bác vẫn làm từng tí một, thật nể quá! Không phải nể vì kỹ năng mà nể nhất là sự kiên nhẫn vô cùng! Respect!
awesome build, though i hope for matinence sake those fiberglass caps can ber removed to change out the rear struts.
Someone please send this man a welding helmet!
I'll try to contact him.
And a proper paint mask xD
@TyBraek, he also needs welding gloves.
Mr Ho deserves his own show on Motor Trend TV.
@@pauldrusch1805 today on motor trend tv Vietnam edition Ho here is gonna turn this clapped out 88 corolla into a pickup truck.
Ilke very good VDO 🙏🤠💞 happy New year ♥️♥️♥️
El Corolla Avila Uno De Esos Carros Que En Mi Pais Venezuela Son Un Patrimonio Rodante Estos Son Confiables,Divertidos,Faciles De Manejar Y Reparar Y Seguros Hoy En Dia Estos Autos Son Unos Clasicos Rodantes Que Aun Siguen Circulando Y Dando Batalla
คุณเก่งมากๆซ่อมเป็นทุกอย่าง👏👏
#จากไทยแลนด์
Прикольный пепелац получился, по дешману пойдёт. Но я бы заварил задние двери, убрал бы задние внутренние арки заменив пружины на торсионы, тогда бы и погрузочный объем бы увеличился. Заменил обычный ручник на электро ручник, тогда бы можно было поставить задний диван в салон вместо двух седений. Для мультимедиа сделал бы подиум и перенёс бы наверх вместо часов.
@contactmeonnicegramdiybyja2278 what is it nisegram?
Nice idea 👍
Shame the rear towers didn't get reinforced, and then get completely covered with fibreglass!
Lots of issues, with body, suspension, steering, even those rear lights are half done...
Nice idea, just a bit rushed.
Don’t you recognize that all tool and equipment he have is : grinder , welder , antique hammer , and some very basis tool ? The point is he did an amazing job with what ever he has on hand which nothing .
Nếu cho bạn sử dụng những thứ đơn giản làm,bạn có thể làm nên tất cả nhu anh ấy?
Very Goody!! Sao paulo Brazil!!
Beautiful work on the car transform into pickup.
Good job Mr ho I weld and fabricate trailers myself and I much appreciate how you do your videos all the process at once as compared to seeing months worth of videos in real time it is better for me to see the entire process in a timelapse version
1984 Corolla SE. my first car in 1994. Man the memories.
Great job, terrific idea Mr. HO! Thanks for taking the time to make a video of your creation.
I'd use the trunk lid and the piece of the roof to make a removable tonneau cover for the new bed.
also since the bed seems to be water tight you might want to drill one or two small drain holes at the lowest end of it for rain and any spills.
This is amazing! For using what you have you really transformed that 4 door Toyota into something that reminds me of a Subaru Brat. 👏
Очень похоже 😂
I was thinking the same as soon as he pulled that rear window forward and started attaching it.
Is there anything this guy can't do? Really admire your ingenuity.
Decent welds
يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون......
سبحان الله وبحمده سبحان الله العظيم. الباقيات الصالحات وللذكر الله اكبر.......
not downing him in this video and (Imm not good at that stuff ) but the door handsfor the back and the back door outline i would of try to bondo all of it where it look more cooler like it was really made like that but thats cool little truck
As always, your work is nothing short of amazing. You put a great deal of hands on engineering into your work, and the level of ability & knowledge is simply priceless.
I was hoping the rear doors would have been sealed up to look like a factory ute also, but if it was intended to identify a modified sedan, then i get it 😁well done bro, fantastic job.
Here in Australia, unfortunately, it would never pass an engineers modification certificate. There is a big list of structural compliance and requirements that must be met before they even look at the project. But who cares, You're not in Australia 😂
Yeah, fuck the gov regulators. Health and safety? They can kiss my ass.
if you want him pass for cetificate in australia, he can do it...
@TinNongTheGioi-ex9es we have a lot of professionally modified cars here in Australia my friend. A lot of awesome engineers here also, and non qualified professionals. Car mods, engine upgrades we are also very passionate about. I just love watching this guy build stuff from scratch on his own. Although I know a lot of this stuff is done behind the scenes, I still love watching it. Makes me want to build more stuff too 😆
Well done and thank you for sharing! 😀 Mark from Australia!
công Nhận a chế suy nghĩ siêu quá ,, đi làm lại chiếc xe để chở cái cây thôi .. độc nhất luôn hi tuyệt vời
Пару вопросов: зачем такой большой вылет колес, и, было бы неплохо дренажное отверстие в кузове на случай дождя. А вообще Супер! Успехов!
А ещё не мешало бы зачистить ржавые места
Тачка металлолом, побыстрому решил продлить ей жизнь не на долго и просмотров срубить за одно, с их влажным климатом она за 5 лет в труху рассыпется после такого "ремонта".
love the work , love the ingenuity . But please anyone watching DO NOT copy this lug nut /spacer design for anything but slow off road use . Extremely dangerous and likely to fail at any moment . Anything over 20mph and this car will start to shake itself to pieces from those lug nut extensions .
Very good mate 👍
In Australia we call that car type a ute and it's common here, like a mini truck
This is basically a brumby
@@tbagindustries4331 yeah totally 👍
Check out Merlin’s Old School Garage channel. He took a Volkswagen Jetta and made a ute. He used a kit. It’s pretty interesting. Here in the states, we don’t see that much. However, I would drive one. Cool looking trucks….
Mr Ho you did it again beautiful work and a great imagination. Thank you for your time and I'll be waiting for the next video keep it up and God bless you sir.
Você é muito inteligente 👏👏👏
Seus vídeos de conserto e restauração são ótimos e muito inspirador 👏
Fantastic transformation and effort :) I just would have added some tie-down points in the back to secure loads safely. Also a drain hole somewhere with all the rain you get :)
Gorgeous! Really enjoyed the yellow color. Even though the black and white "dream" at the beginning showed the design, that yellow was a beautiful surprise when you started painting!
I appreciate the time to retrofit this vehicle and make the video. Yes there are things I would do differently, but well done, keep improving. Blessings from the Caribbean.
I don’t always agree with every aspect of your designs, but there is no denying your skill and attention to detail. Good work, good video!
يا ايها الذين آمنو لا تلهكم اموالكم ولا اولادكم عن ذكر الله ومن يفعل ذالك فاولئك هم الخاسرون......
سبحان الله وبحمده سبحان الله العظيم. الباقيات الصالحات وللذكر الله اكبر.......
Талантливый человек! Хорошая прокачка 🎉
You made the BEST version that car has ever seen. AMAZINGLY practical and badass.
Mr HỒ Thánh Chế this super crazy but as well super cool!! Great job as always!!
Rất hy ay chúc sức khỏe nhé bạn
The biggest achievement in my mind is taking all of that apart, especially the dash, and putting it back together.
My grandpa did basically the same thing to an old four-door sedan he had years ago when I was a kid. The main difference is he left the back doors where they opened. That way he could load stuff from the side without lifting it over if he had to.
Smart man
Photos would be cool,
There was a guy in Virginia who did this to a Cadillac.
Bonjour, super ce projet, amities de Narbonne 👍🏻
Very cool build, you have some severe dedication. Great job!
this was an amazing build but someones gotta say it. you cut corners on the rust on that car and its gonna bite you in the rear. you left metal with surface rust and unfixed rust holes in the wheel wells. if you're rust mitigating phoshric acid works great but if you don't have access to it vineger, acidic toilet cleaner, or citric acid will also work.
I like it alot man your work is amazing! If i might suggest weld that door full so there is no more door line, and remove handel and also make it smooth. That way it would look more like one panel. Its only my personal opinion, but like i said man great work!
Hay que nreconocer que es un jenio
для первого раза отличный результат. учитывая то, что всё делалось на глаз, на коленке. вот только как менять задние стойки?
хотя, судя по видео с лодками, это пробный вариант. надо ждать продолжение. паренёк неугомонный, респект и уважуха!
Он какой отморозок, просто в шоке с него😂
Excellent effort , using what you have , keeping cost down and very inexpensive , viewing from Detroit Michigan USA 🇺🇸 .
Lo felicitoo amigo.le kdo super bonitaa asu gustoo bien echaa felicidades esta 💯💯💯👍👍👍👍👍👍👍💯💯💯💯👋👋👋👋saludos d🇺🇲 soy dl salvador..🇸🇻👋👋👍👍👍
If you had the hatch 4 door, or the tailgate from a Corolla FX, you could make a gate to extend the bed into the passenger compartment for larger items. My family had an 84 Corolla back when it was brand new. I had an 88 FX AE88.
I really like the way it came out, just be aware that running your wheels like that puts a lot more stress on your wheel bearings as well as some differences in handling.
A LOT more i'd say. still, it should work, esp if its not daily driver on long distances ;)
He should widen the front wheel wells so he doesn't have the tires stop when turning
I wonder if he could lengthen the wheel studs and run twin rears like a dually?
Looks a bit like a Subaru brat with that raked stance
Very cool 😎👍
@@nostreamavailable9090 or weld two rims together, have you seen the guy from russia building the cyper punk car, you should check that out its pretty cool.
Toyota c'est fantastique !!👍 Encore plus 30 ans a rouler 👏👏👏
Awesome!! Love seeing stuff like this and your really the only one I've seen doing it. Maybe you should update along the way? Just do extra stuff to it and post videos. I know me and a lot of others would love to see it. But great jib man!! I'd drive it and use it all the time !!
Looks great except for the wheels. You have to turn them back around or get new ones.
Yeah, not much turning radius with the tires hitting the fenders?
I didn't want one of these until now. Go Mr. Ho!
quá trời đỉnh luôn, am hiểu và khéo tay thật sự
I am a little worried for the rot and the rear coil mounts, but seeing as they are fiberglassed over, it may be fine for a while
until you want to replace those struts
You, sir, are an absolute inspiration. Please keep doing whatever it is you are doing!
"Mom, can we have a Hilux?"
'We have a Hilux at home..."
Well done, Mr. Ho.
Excelente trabajo saludos desde Honduras
Damn, your creations are always magical, a joy to watch!
That is a1985 Toyota, had one new in 1985 nice to see it lasted this long! Nice job!
Khâm phục tài năng của bạn. Hi vọng được gặp bạn ngoài đời thực.
Should have removed the rear door handles and filled it in as well as the space around the rear door and it would be perfect :)
Надо было еще в кузове обои поклеить 😁😁😁 а вообще по хорошему, после того как разрезали крышу, оставалось разрезать только пол, ну и выкинуть 😁😁😁 а так конечно парень молодец! Горшки с цветками возить можно 😁😁😁👍🏻👍🏻👍🏻
I think he cut too many corners here compared with his previous video where he restored an engine from the bottom of the ocean.
Things he can work on are..
1) restore the engine bay
2) install a back up light
3) roll out the fenders to cover the wheels
4) cover up the rear door handles
5) lift the front of the car
6) clean the suspension parts.
You did a fantastic job there sir, very very well done 👍
The only thing l wish you had done was remove and shave the redundant rear door handles and welded up the rear door gaps 👍
Best wishes from the north west of England and god bless you and yours 🙏🏻❤
Jay
I am mad that he did not clean the rest
@@faaaatcaaat76 I’m not mad , but I do think he should have gone all the way
Bảo sao kênh toàn người nước ngoài coi. Người nước ngoài họ coi trọng nội dung sáng tạo, sự khéo léo trong kỹ thuật cơ khí làm ra những sản phẩm độc đáo đầy thú vị. Người xem Việt Nam hiện nay đa phần lại là phụ nữ và đám nhóc ác đam mê toàn thứ rác rưởi hèn chi nội dung của kênh này không được đề xuất nhiều! Respect you!Content creator good for life
Chúng tôi đánh giá rất cao! Cảm ơn bạn!
Chuẩn bạn, nãy tui cũng xem kênh một ông kia cũng v, kênh Việt Nam luôn mà toàn người nước ngoài khen, mấy ông Việt Nam vô chửi xối xả, k hiểu kiểu gì. Đúng nhân tài ở VN k thể sống đc, ra nước ngoài mới phát triển đc @@
Desde Portugal 🇵🇹. Ola.. Bon. Traballo. Gostei. Do. Vidéo. Obrigado pour. Vidéo.
Thấy bạn💪🇷🇺
What I see: a spinoff Subaru Brat but with a DNA of Toyota
Absolutely gorgeous and super practical, I truly am impressed.
Thank you for posting this great job!
Nice job !!! 👍
In Italy isn’t possible bild or modify a car easily like this...there’re a lot of burocratic problem... 😡
He did a amazing job on it but should
Got rid back handle and tail gate on it
From the trunk cut it make it fit car look
Good Like that
Ok Mr. Ho this one is wild! Really Cool great job! LoL I'm so busy myself, I'm actually watching two of your shows right now at the same time trying to catch up😂🤣😂🤣😂 keep building my friend!
Excelente trabajo . Saludos desde Apodaca Nuevo Leon Mexico.
Muy buen trabajo amigo,excelente
This is so cool i have a Toyota Camry wagon converted into a panel Van hearse well done 👍 cheers Stephen 🍀🤠
Dọn lại quá chất .Đi đăng kiểm luôn Hồ.
Bạn quá giỏi. Nếu đam mê bạn nên hướng tới độ chế phục hồi ôtô cũ
tuyệt quá anh, chỉ tiếc là mấy chiếc xe độ chế không được phép đăng kiểm lưu hành ở Việt Nam
Bạn rất giỏi và sáng tạo! Tôi bái phục bạn!!!
Impresionante trabajo. Felicitaciones campeón un saludo desde Argentina 👏👏👏👍👍👍
It's a Toyota? It has at least another 100,000 miles worth left in it as long as you stay ahead of the rust! Nice job on the conversion. Can't imagine doing all of that with a stick welder and dark sunglasses.
Muy buen trabajo le hubieras tapado la manija y la union del pedeso de la puerta trasera de hay quedo muy bien 👍🏻
Great conversion. Generally, I really like the finished car. I would have done a few things a little differently and would have strengthened it in a lot more places
Fantastic! I actually want to do that same thing with my car! All you need to add to it now is a simple cargo net tailgate!
Quá tuyệt vời!!! Mong 1 siêu phẩm khi bạn kết hợp du thuyền dưới nước và đi được trên bộ!!! 🤝♥️☕️☕️☕️
Luv how you kept rear door handles and the rear quarter lights on back door fantastic
Job
Một mình mà cải tạo chiếc xe hơi củ nát thành một chiếc bán tải thật ngon lành, đúng là thánh....❤❤
she is beautiful! I would totally love to drive that bad boy around town!
Việt nam mình có quá nhiều nhân tài…..
Quá ngưỡng mộ anh quá giỏi❤❤❤
Cai gì cũng lam dc
hi Mr Hồ! xe tiện ích quá nha! Rất tiện lợi
6:58
"-Тебе удобно работать инструментом без кожуха?
-Ну, если работаю, то наверное удобно.
-Да я просто спросить...
-Ну вот и не спрашивай."
😁
My first car in 1995 was a 1985 Toyota Corolla Seca 5 speed manual 1.6 L petrol hatchback. My second car was a ute.