Join @Nasatchannel and learn how to craft DIY boats from recycled materials. You will find step-by-step tutorials and tips make eco-friendly boating accessible to all. Subscribe and sail towards sustainability! ruclips.net/channel/UCqYWWI_sRxa4dHwEVUIk-vA
Dapat marami mtuto (learn this) ito Ng rescue teams🇵🇭 for binabaha or boating or fishing nearby shorelines lang (kailangan lang Ng add layag both sides) GOD Bless More sa Sipag at Tiyaga nya mPKINABANG GAWAIN Ng tao!!!!!!!! So pkita n next ngamit sa matubig n lugar kung Ano result?! Mas MAGANDA sana kung YACHT design at Mas mTIBAY materials gamit db Po so GOD Bless More🙏🇵🇭
@@MariaLuzBuenaventura-fs9xc If you can help me to learn boat building from A to Z I shall be extremely thankful to you. I am a Sri Lankan. I hope you will find time to help me with practical knowledge. Thanks
This man has talent, machining all his own pieces, all the fiber glass work, all reinforced with the half pvc and glassing it all in, well done sir any river dweller would be proud to own it.
Well I watched the video, read the comments, and re-watched the video, twice. I must say the whole job leaves me speechless. He took the lower part of an old hulk and added sides, transom and tunnel shaft drive to it. REMARKABLE. I've been in the boat building/restoration activity for 40+ years and I learned things I never thought of before in the one 25 minute video. The whole project was wonderful. I really like the finished boat and agree with some others that I would love to have this river boat. Thank you for the video, I know the time it takes to edit this to 25 minutes is huge..outstanding. 80 y/o Westerner from USA.
If duplicating the work in the United States this project would cost over $50,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory..
This young man did an apprenticeship someplace. Too many skills to get by guess and test. Cudos to his master and his student. Dear Student: Great job. Please pass your skills on to the next generation. Your ability to create forms based on visualization is a special talent, a gift.
Bad thinking right there. If duplicating the work in the United States this project would cost over $50,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory.
*I spent 17 years building, repairing and maintaining locomotives for one of the largest transportation companies on the planet. I can take a locomotive apart down to Its wheels and put it back together again..I am not easy to impress. Let me say, I'm impressed..Beautiful work with a breathtaking end result*
Hello everyone that's really cool i seen this and i am a part of fiberglass and i have many experience on bus or trucks fiberglass but it's out standing beautiful amazing and i want to learn about fiberglass ❤
It was a wonderful thing to see this skilled craftsman breathe new life into an old boat. His ingenuity and hard work would make any man in the world want to have a little of his talent.
This guy is obviously not just some simple backyard DIY person...he is magnificently proficient in many varied skills including fiberglass moulding and arc welding
Exactly. Clearly well trained somewhere and he has the tools needed to fabricate everything. Despite the setting, he is NOT some humble villager. And what Asian village happens to have a flatbed crane truck conveniently available.
Wow, this was almost like building a new boat from scratch. His channel makes enough cash to pay for this project. He doesn't need to make a profit with this boat.
In Vietnam, you can pretty much buy anything online or at a local shop without any hassle. I believe he's different from the rest because he's willing to take the leap and embrace the risks. When it comes to his skills, most repair guys in small shops can handle it, even without any formal training. You can see for yourself-there are tons of RUclips videos showing this kind of work, and a lot of them are made by Vietnamese people
People in Third World countries have to be very resourceful because they can't just go out a buy new boats, new cars or even small new motorcycles. This man is amazing. We all should subscribe here which costs us nothing and will help him keep it all going, thanks.
Renovating an abandoned boat is more than a restoration project; it's a voyage of passion, perseverance, and the timeless connection between humanity and the sea.
Out of nowhere this light boat...suddenly it became a very nice ship after the Magnificent work and challenges to face that were resolved in the process!! Congratulations! Lima Capital.
No cabe comentario alguno , ni critica , es el trabajo ,tiempo y esfuerzo de alguien que tiene un resultado final, mas alla de ser funcional , no interesa si es bonito o tiene un delineado profesional, es merecedor de reconocimiento por el solo hecho que de la nada ,hace una obra de arte , admiro este tipo de personas , solitario y extrenadamente creativo .
Great respect for this guy putting this together in his back yard, he’s got the smarts, can’t wait when he starts building a super yacht, no doubt he can do it!
I have reported the video to RUclips, this guy made a video of HIS own boat build, @Quantum Tech are make money and generating incume from advertisments on their false chanel.
@@rodgersmith4116 I do understand what you are saying, but to be fair Quantum Tech has not said this is their own video and they have placed a couple of links to the original video of NASAT Channel promoting his channel and mentioning NASAT through out this video, which does make a pleasant change compared to some channels that just blatantly rip other smaller channels hard work off without even giving a mention to the original creator. I do think this video will generate traffic to NASATs channel, I for one will be checking out Nasats channel and hia other videos and I encourage you and other viewers to go over to NASATs channel and support his work. The link to Nasats channel is in this videos description and in the first comment at the very top by Quantum Tech HD. Appols for this longer reply.
Este é o cara ele é tudo mecanico, marceneiro, eletrecista, torneiro, pintor, soldador, esforçado, sabe fazer, inteligente, e com certeza tem dinheiro 👋👋👋👋👋👋👋👋👋
I personally have never in my 73 years seen a skillset equal to this amazingly & I'm a master Mariner & a highly trained heavy plant fitter. Absolutely remarkable🙏💙👍Bravo young man. 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Have to agree with you. 50 years of messing about with boats, both power and sail, welder, millwright, machinist. The skills of some 2nd and 3rd world mechanics put ours to shame. Most things we buy ready made solutions for, they cobble together from bits n pieces and do a wonderful serviceable job of it. Strange looking design for a boat but that's their style and it works for them. I wonder if they do larger yacht types for customers.
If duplicating the work in the United States this project would cost over $150,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory.
Да вы издеваетесь? Где тут хорошее понимание? При винте правого вращения гайка гребного винта должна быть с левой резьбой. Шпоночный паз гребного винта резать "болгаркой"? Это Вам как минимум! Я понимаю, что в такой стране как Вьетнам, выбирать не приходится, и для бедной страны, с минимумом возможностей построить "плавсредство" из говна и палок - это способ выживания. Не спорю, - мастерский! В этом плане парню уважуха. Но знаниями судостроения, даже маломерного, тут и не пахнет. К стати, соблюдайте падежи, пишите грамотно
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Join @Nasatchannel and learn how to craft DIY boats from recycled materials. You will find step-by-step tutorials and tips make eco-friendly boating accessible to all. Subscribe and sail towards sustainability! ruclips.net/channel/UCqYWWI_sRxa4dHwEVUIk-vA
Dapat marami mtuto (learn this) ito Ng rescue teams🇵🇭 for binabaha or boating or fishing nearby shorelines lang (kailangan lang Ng add layag both sides)
GOD Bless More sa Sipag at Tiyaga nya mPKINABANG GAWAIN Ng tao!!!!!!!!
So pkita n next ngamit sa matubig n lugar kung Ano result?!
Mas MAGANDA sana kung YACHT design at Mas mTIBAY materials gamit db Po so GOD Bless More🙏🇵🇭
Yes this looks like his first time.
😊pp
@@MariaLuzBuenaventura-fs9xc If you can help me to learn boat building from A to Z I shall be extremely thankful to you.
I am a Sri Lankan. I hope you will find time to help me with practical knowledge. Thanks
😊😊😊
This man has talent, machining all his own pieces, all the fiber glass work, all reinforced with the half pvc and glassing it all in, well done sir any river dweller would be proud to own it.
Отремонтировать это пол беды, а узаконить?
Yep but machined the wrong way thread on the prop bolt. Should have been left hand thread. The. It Will spin off.
They do this all the time
@@pupkin5102❤😂
@@pupkin5102 En su pais no debe ser problema, de todas formas aqui en España por ejemplo si el barco que viste antiguo tenia papeles podria colar.
Well I watched the video, read the comments, and re-watched the video, twice. I must say the whole job leaves me speechless. He took the lower part of an old hulk and added sides, transom and tunnel shaft drive to it. REMARKABLE. I've been in the boat building/restoration activity for 40+ years and I learned things I never thought of before in the one 25 minute video. The whole project was wonderful. I really like the finished boat and agree with some others that I would love to have this river boat. Thank you for the video, I know the time it takes to edit this to 25 minutes is huge..outstanding. 80 y/o Westerner from USA.
If duplicating the work in the United States this project would cost over $50,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory..
Speaking as a first-world Westerner, this is why ‘diversity’ is so crucial: it is not for ‘their’ sake, but for our’s. We have much to learn.
O
..
,?vkvcovnqhQZ😊@@larsfrandsen2501
More FAKE BULLSHIT.
@@ASDasdSDsadASD-nc7lf More FAKE BULLSHIT.
The craftsman who rebuilt the boat and engine is truly talented. Thank you for sharing your video.
Sharp observation🤠
This is a bull sheet that cannot fight with the sea, is only for the kids to play with.
More FAKE BULLSHIT.
Outstanding engineering skills with so few tools - the guy is just a natural
More FAKE BULLSHIT.
Speechless! My Grandparents generation in the UK up to the late 1970’s had all of these skills but to see this chap possessing them is incredible.
Very much a case of 'needs must', non-existant these days where everything is available or provided.
More FAKE BULLSHIT.
I don’t care if it’s refurbished or scratch built; this guy is talented. Nice work!
Talent is an understatement.
More FAKE BULLSHIT.
@@johnwilkinson5789 More FAKE BULLSHIT.
Any riverboat operator would be proud to own that boat,, He is a very gifted builder and engineer,,, :-)
More FAKE BULLSHIT.
This guy is an inspiration. Talents like this are what we should be seeing more of on RUclips. He deserves an award ❤👏👏👏👍🤝
More FAKE BULLSHIT.
Это гениальный человек, вдобавок и многопрофессиональный. Молодец брат, супер❤👍🙏
Is this guy Dexter?
В следующий раз этот мужик наверное космический корабль сделает. Ролики для дураков.
Рухожоп даже не убрал грязь с днища - так и осталась со старой лодки :)))
@@mikco99Đây là một sản phẩm của người Vietnam 🇻🇳
Respekt. Vietnam wird sich mit solchen Menschen zu einem wirtschaftlich prosperierenden Land entwickeln.❤💯👍
What an amazing man. Creating/building what he did with what had where wood must be a premium, is astonishing.
Thanks!
Why do I see a picture of a totally different boat which I would liked to have seen being restored instead of a build of a fiberglass boat
Click bait…. far too much of this s**t going on now!!
Commonly known as click bait
@@jedclampett6466
Mm
Because it's Quantum. Con artists ať their best.
They are calling it a yacht wah haha! Good for river rescue and floods, tho
Every boat builder should hire this man on the spot. His level of skill is beyond belief.
I could see a right combination of engineering skill, focus, patience, and most importantly the commitment.
There are lots of talented people like him but unfortunately lack the means. This man has much experience and I wish him all the best.
More FAKE BULLSHIT.
magnifique 💥👍👍👍👍👍👍
This young man did an apprenticeship someplace. Too many skills to get by guess and test. Cudos to his master and his student. Dear Student: Great job. Please pass your skills on to the next generation. Your ability to create forms based on visualization is a special talent, a gift.
yeah youtube university
Bad thinking right there. If duplicating the work in the United States this project would cost over $50,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory.
И плотник и столяр и слесарь и моторист ...талант.
*I spent 17 years building, repairing and maintaining locomotives for one of the largest transportation companies on the planet. I can take a locomotive apart down to Its wheels and put it back together again..I am not easy to impress. Let me say, I'm impressed..Beautiful work with a breathtaking end result*
Question?… what is a raycore ? What are wicks ? Piston travel? Sight glass ?
i Spent 50 years playing piano, and
i agree with you :)
Hello everyone that's really cool i seen this and i am a part of fiberglass and i have many experience on bus or trucks fiberglass but it's out standing beautiful amazing and i want to learn about fiberglass ❤
It was a wonderful thing to see this skilled craftsman breathe new life into an old boat. His ingenuity and hard work would make any man in the world want to have a little of his talent.
Without a fully kitted out boat yard behind him he has done a wonderful job well done my friend
More FAKE BULLSHIT.
I'm very impressed!! This guy is extremely talented and has excellent workmanship and skills!!
This guy is obviously not just some simple backyard DIY person...he is magnificently proficient in many varied skills including fiberglass moulding and arc welding
Don't forget mechanical, machining and painting.
He doesn't understand that dust masks are not protecting you against the fumes in the fiberglassing process 😂
Exactly. Clearly well trained somewhere and he has the tools needed to fabricate everything. Despite the setting, he is NOT some humble villager. And what Asian village happens to have a flatbed crane truck conveniently available.
Wow, this was almost like building a new boat from scratch. His channel makes enough cash to pay for this project. He doesn't need to make a profit with this boat.
In Vietnam, you can pretty much buy anything online or at a local shop without any hassle. I believe he's different from the rest because he's willing to take the leap and embrace the risks. When it comes to his skills, most repair guys in small shops can handle it, even without any formal training. You can see for yourself-there are tons of RUclips videos showing this kind of work, and a lot of them are made by Vietnamese people
Молодец!!!
Incredible, man knows his stuff, totally impressed and he's there for the community in case of disasters, simply fantastic!!!!!
تحفة فنية وجميلة
عاشت ايدك يا بطل على هذا الإنجاز الرائع الجميل وانشالله تعمل الأحسن والف تحية طيبة لك
سويلك واحد مايرادله شي
Congrats for your nice build.
You are very talented 👍👍
People in Third World countries have to be very resourceful because they can't just go out a buy new boats, new cars or even small new motorcycles.
This man is amazing. We all should subscribe here which costs us nothing and will help him keep it all going, thanks.
You are brilliant.. simply amazing!...
Красава мужик , и голова и руки , все в порядке , одно слово мастер 🖐️👍👍👍👍👍
Идиот, какой, нах, человек?! Красава? Сам ты такое слово, придурок
Een geweldigen vakman een mooi vis boot 👍👍👍
Renovating an abandoned boat is more than a restoration project; it's a voyage of passion, perseverance, and the timeless connection between humanity and the sea.
Super, der weiß genau was er da macht ! 👍👍👍
Браво!!!я в восторге!!!мастер на все руки,отлично!!!рад за Вас,Ваше мастерство,супер!!!
Out of nowhere this light boat...suddenly it became a very nice ship after the Magnificent work and challenges to face that were resolved in the process!! Congratulations! Lima Capital.
КАКОЙ ТЫ МОЛОДЕЦ !!! 👏😃
No cabe comentario alguno , ni critica , es el trabajo ,tiempo y esfuerzo de alguien que tiene un resultado final, mas alla de ser funcional , no interesa si es bonito o tiene un delineado profesional, es merecedor de reconocimiento por el solo hecho que de la nada ,hace una obra de arte , admiro este tipo de personas , solitario y extrenadamente creativo .
Молодец парень👍. Большая работа !
Thats one boat i will buy anytime cause i saw whats was put into it,100%!GREAT WORK.
NpkaGALING
mgkano Kaya nGASTOS Ng GUMAWA? At pde PGKAKITAAN nya tlaga db po
me gusto mucho tu proyecto excelente trabajo
Получилось классно! Парень мастер отличный! 👍💪
Молодец парнишка...на все руки мастер
énorme travail ,👌👍 bravo monsieur pour votre savoir faire
Great respect for this guy putting this together in his back yard, he’s got the smarts, can’t wait when he starts building a super yacht, no doubt he can do it!
Wow.. fantastic. Well done lovely to watch..❤❤❤
Inovatif and kreatif wonderful...good Job bro...👍👍👍
❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤عالی فوقالعاده است
This man didn't "find" a boat. He bloody well built a boat. Outstanding young man 🫡👍
I have reported the video to RUclips, this guy made a video of HIS own boat build, @Quantum Tech are make money and generating incume from advertisments on their false chanel.
@@rodgersmith4116 I do understand what you are saying, but to be fair Quantum Tech has not said this is their own video and they have placed a couple of links to the original video of NASAT Channel promoting his channel and mentioning NASAT through out this video, which does make a pleasant change compared to some channels that just blatantly rip other smaller channels hard work off without even giving a mention to the original creator.
I do think this video will generate traffic to NASATs channel, I for one will be checking out Nasats channel and hia other videos and I encourage you and other viewers to go over to NASATs channel and support his work.
The link to Nasats channel is in this videos description and in the first comment at the very top by Quantum Tech HD. Appols for this longer reply.
@@rodgersmith4116 Thanks for picking up on this. The real channel is at the 24:23 (Nasat Channel).
Young?? Lol, this guy is 37 years old.
So what about the creator of the UFO boat, sir?
Expectacular video. 👏👏👏👏👏👏👏👍👍👍👍
Не пропадёт . и механику и ремонт он гениален 👍
8:00 This is one of the best videos I've seen today! 🌞
Legal muito bom 👍👍👏👏
Felicitări pentru lucrarea frumoasă executată!
Experiența și-a spus cuvântul!
Este é o cara ele é tudo mecanico, marceneiro, eletrecista, torneiro, pintor, soldador, esforçado, sabe fazer, inteligente, e com certeza tem dinheiro 👋👋👋👋👋👋👋👋👋
I personally have never in my 73 years seen a skillset equal to this amazingly & I'm a master Mariner & a highly trained heavy plant fitter. Absolutely remarkable🙏💙👍Bravo young man. 👏👏👏👏👏👏👏👏👏👏👏👏👏👏👏
Have to agree with you. 50 years of messing about with boats, both power and sail, welder, millwright, machinist. The skills of some 2nd and 3rd world mechanics put ours to shame. Most things we buy ready made solutions for, they cobble together from bits n pieces and do a wonderful serviceable job of it. Strange looking design for a boat but that's their style and it works for them. I wonder if they do larger yacht types for customers.
Здорово! Хорошая лодка получилась❤
Good video.. Like it. !! Thank you. Watching from Bangkok Thailand.
So..Much..Respect for this man!!!
Nice job starting to look vary nice can't wait to see the finished job keep up the good work.
This is the best way to learn. This bloke and his elders did an amazing job 👏. 10/10 .
Très beau travail vu de FRANCE🟦⬜🟥👍👍👍👍👍
What an incredibly talentedman. I am so envious of his abilities. 👏🏻👏🏻👏🏻
well done great job
Simplemente increible lo talentoso de este hombre
Top! Excelente trabalho, muito bonito ficou essa embarcação!
Un travail extraordinaire et exceptionnel Bravo 👏 de France 🇫🇷
Absolutely fantastic
Estoy asombrado de lo que e visto felicidades y gracias y mucha salud para seguir desde Barcelona España
Tebrik ederim Muhteşem çalışma Emeğinize sağlık kolaylıklar dilerim 👍
Bravissimo ! Sei un Genio ! 👋👋👋👋👋
WOW, Jack of all trades, master of ALL!!!
fantastic beautiful work you very skillful talented man take my hat off to you brilliant love it
Admire and love people who work hard and are creative
❤very good high quality. fine Thanks ❤
Sir yes siir..👍👍🔥🔥
powered by Subaru... fantastisch 😎 Sie sind ein Genie🤓
I admire you
You so much abilities
I have been observing you
Nice and God bless you
Dear friend.Amen happy
😊💞🌻💕🌟🌈🌻🌻🎈
Kreatif dan inovatif sekali.. mantap 😅
The dude is very talented
Отличная работа, друг 🤝
This guy has a whole fleet of boats now. I’m sure he will soon start building super yachts!
Do you know this person and do you know where he is,from and his telephone number.
Thanks.
@@saeedmobarek6690Việt Nam 🇻🇳
Inspirational, amazing job from start to finish, so talented, well done
Building the boat was one thing, but when he took the engine apart to clean and rebuild it I about fell out of my chair
Good job bro 🎉🎉🎉
This type of boat is NOT always used for good either, this size and shape of boat are used for pirate skips also.
Đầu óc mày đen tối
@@vanhuuo6542He just stating fact.
I agree a dark.mind
Why go there
Maybe the bad guys stole it!
In Vietnam?
Verry good 🙏✊️👀😍
If duplicating the work in the United States this project would cost over $150,000 U.S., i.e. twice the cost of buying a used boat in perfect condition built in a factory.
Why? because tax or what?
@@hendranurbiansyah1859 Capitalism, probably.
I am impressed
Definitely talented young man who Would be an asset to a large corporate setup!!!
Bagus banget setelah merenovasinya👍👍
Wow you have a all round talent, I wish I could do that. Fantastic job!
So many skills, it's just wonderful,! Bravo!
Bravo Veramente un ragazzo Maestro.
Yo lo sigo a tiempo es muy bueno en todo que hace 👏👏👏👏👏
Очень круто 👍
Very good job! It was pretty nice!!!!!
Great job on the boat 😊😊😊
очень хорошее понимание в постройки лодки. браво. мастер.
Да вы издеваетесь? Где тут хорошее понимание? При винте правого вращения гайка гребного винта должна быть с левой резьбой. Шпоночный паз гребного винта резать "болгаркой"? Это Вам как минимум! Я понимаю, что в такой стране как Вьетнам, выбирать не приходится, и для бедной страны, с минимумом возможностей построить "плавсредство" из говна и палок - это способ выживания. Не спорю, - мастерский! В этом плане парню уважуха. Но знаниями судостроения, даже маломерного, тут и не пахнет. К стати, соблюдайте падежи, пишите грамотно