@@1972OGTony Like we pointed out, Snapshots just contain the routing and mixer settings. Workspaces on the other hand contain the complete state of the TotalMix FX session (including 8 snapshots).
Here's my understanding. Layouts - these are ONLY the presence or absence of inputs and outputs (as you decide to show or hide them), and the renaming of them in the session. Nothing else. Snapshots - these are just the router and mixer settings of the session. Nothing else. They do not include the renaming or hiding of inputs or outputs. Workspaces - these are backups of everything, including all layouts and snapshots in the total mix session Is this correct? If not, please correct me in detail. Thanks!
If you guys wrote instructions for WORKSPACE you must have forgotten to include them in the printed User Guide. I've struggled to use Total Mix since day one and I believe the lack of explanations of WORKSPACEs verses SNAPSHOTs is the heart of my issue. I wouldn't say this video brings much clarification to the issue either. Explanations of words only and a bit of screen recording without actual functional examples is not a very thorough teaching method. Screen recording here isn't very clear, IMO. I'll just start experimenting and see where the cards lay. At least now I realize where my confusion is: missing info from the User Guide!
Thank you for your videos ! I still haven't figured out what the difference is between having the phones output in the control room section, or in the hardware output section. Is it possible to have different mixes for every headphone ?
Hello everyone, I have one question. I use Logic Pro and RME babyfacePRO. I hear the sound of the instrument "clean" and when I choose some presets the sound doesn't change at all with means the signal im hearing is the clean input. If I recorde something then press play the sound I hear is the sound with the desired effect. What I would like: to hear the desired effect while im playing/recording. In my old Mac that used to happen - plug and play - but then I purchased a new one and since then I have this issue. Can you please enlighten me? Thank you so much and congrats for your channel.
Hey thanks for this video.Just need some help.I have a condenser mic that i have connected to input 1 of my Babyface Pro.When i record arm my audio channel , i can see the signal in the track but can't hear anything out.But in Total Mix when i raise the fader for hardware input one (my mic) assigned to PH 3/4 , i can hear it through total mix but not through Logic.Could you please help me out ?
Yes. question one. Why does my display not look like yours!? First button you click in "snap shots" does not exist on my display. Game over right there
I continually ask for this assistance. PLEASE do a begnner's video on recording real instruments like guitar. I've worked out how to record aurio via xlr, but I just can't get the rme to record electric guitars that I input directly.I've had my rme babyface all year and probably devoted 80-100 to this frustration. Every time I try I just surrender and use my old Yamaha cubase. Please help me.
You need to activate the "instr" switch in the input channel 2 in Totalmix FX. If this doesn't work, please contact our support at support@rme-audio.de
Hi ! I'm UFX+ user , I also have ARC. I would like to know what would be the best to integrate two subwoofers with our speakers in totalmix. I would like to have option 1 - just stereo monitors, And option 2 - stereo monitors (high passed with totalmix eq) + two subwoofers which will play in stereo as an extension of L and R channel, of course linked so I can control the volume of the whole system. I won't be going from main UFX+ outs to subs and then from subs to monitors, since the subs doesn't have balanced connections, would like to hook the subs on separate channels. Can that be done with snapshots and have the ARC setup for fast switching between the two options ? Thanks
Yes you can save the different setups as snapshots and load them via the ARC USB. The subwoofers can be connected via further analog outputs and controlled as a fader group. You can program the buttons of the ARC in TotalMix FX under "Options" - "ARC & Key Command Settings".
@@RMEAudio One more question please, so I did everything with dual subwoofers, and everything works perfectly, it just seems that snapshots don't override groups ? For example I want Snapshot 1 to have a group of Main Out on Channels 1/2, and Output Channel 3/4 fader linked in a balance -3db to the Main in that way when I have Main Out set at -6, that Ch Out Fader 3/4 follows at -9 so on... But I want Snapshot 2 to have fader group again consisted of Main Out (Ch 1/2) and Fader Ch 3/4 but this time I want Ch 3/4 to follow with the -6db Offset. Is this possible, to setup that way that every time I call a snapshot faders that are grouped with Main Out adjust its relative levels to the Main Out accordingly ? Thanks
@@janmagdevski4973 In this case you have to save your settings as a workspace (quick select menu "W"), because snapshots don´t change fader groups settings.
Does the Snapshot file save one snapshot or the 8 snapshot slots? Does the Workspace file save one Workspace or the whole Workspace menu? In which cases would a Snapshot file be more useful than a Workspace file?
The snapshot loads one snapshot, for example one you do not use very often. The Workspace file saves also the Workspace menu. Snapshots include all mixer settings, but no graphical elements like window positions, window size, number of windows, visible EQs or Settings, scroll states, Presets etc. Only the state wide/narrow of the channels is registered. Moreover the Snapshot is only temporarily stored. Loading a Workspace causes the loss of all stored Snapshots, when these all had not been saved before in a Workspace, or separately via File / Save Snapshot as. Via File / Load Snapshot the mixer states can be loaded individually.
@@RMEAudio Wow that was fast, thank you! I don't have my interface with me to try stuff so I'm still not fully getting it - sorry! I didn't get it when I read the manual for that section either ;) I will do some experimenting and maybe get back with questions. A suggestion: the manual is lacking a clear explanation of Workspaces, they don't even have their own section. Still don't know if saving a Workspace/Snapshot to a file saves all the stored Workspaces and the Snapshots menu or only whatever is active at that moment.
@@stormymondays A Workspace contains all 8 Snapshots. If you have multiple Workspaces, each one should be saved to a file individually for backup purposes.
@@RMEAudio Still trying to wrap my head around why I would save a workspace over a snapshot and vice versa. Let's say I have two projects in my studio, one overdub project, with one or two inputs at a time, and the second, a full band session with a lot of inputs and completed routings. Would it be best to save those two projects as independent workspaces or independent snapshots. Why would I use one over the other? Thanks so much.
@@MarkElliottcreative Snapshots include all mixer settings, but no graphical elements like window positions, window size, number of windows, visible EQs or Settings, scroll states, Presets etc. Only the state wide/narrow of the channels is registered. In your case I recommend save as Workspace. By pressing "W" you can open the Workspace quick select menu with 30 slots.
Warum zeigt ihr ständig den Moderator? Der spielt GAR keine Rolle, den will ich nicht sehen! Das Totalmix Fenster muss IMMER gezeigt werden. Das wäre nützlicher. Trotzdem Danke für die Mühe, das Video zu erstellen.
You'd think such a high quality equipment company would have hired somebody with a little more charisma and good presentation skills. This guy is a snooze fest and he does not explain this stuff well at all.
Do you have questions about TotalMix FX? Let us know!
Whats the difference between snapshot and workspace they seem the same?
@@1972OGTony A snapshot is a mixersetting, a workspace is everything, snapshots included for example and many more things.
@@1972OGTony Like we pointed out, Snapshots just contain the routing and mixer settings. Workspaces on the other hand contain the complete state of the TotalMix FX session (including 8 snapshots).
RME Audio Ok I got you thanks
Please do thorough video on the matrix
That's some SERIOUS power and flexibility there... and that's just one reason we buy RME!
Great video, thanks!
Took me about 5 seconds to get an answer to my question - totally awesome!!! THANK YOU!!!
Here's my understanding.
Layouts - these are ONLY the presence or absence of inputs and outputs (as you decide to show or hide them), and the renaming of them in the session. Nothing else.
Snapshots - these are just the router and mixer settings of the session. Nothing else. They do not include the renaming or hiding of inputs or outputs.
Workspaces - these are backups of everything, including all layouts and snapshots in the total mix session
Is this correct? If not, please correct me in detail. Thanks!
x2
If you guys wrote instructions for WORKSPACE you must have forgotten to include them in the printed User Guide. I've struggled to use Total Mix since day one and I believe the lack of explanations of WORKSPACEs verses SNAPSHOTs is the heart of my issue.
I wouldn't say this video brings much clarification to the issue either. Explanations of words only and a bit of screen recording without actual functional examples is not a very thorough teaching method. Screen recording here isn't very clear, IMO. I'll just start experimenting and see where the cards lay.
At least now I realize where my confusion is: missing info from the User Guide!
Thank you! This video is very helpful. I recently purchased a Fireface UFX+ and have been learning the basics of TotalMix FX.
Glad to help out!
Great tutorial series, you sir are a life saver!
Thank you for your videos ! I still haven't figured out what the difference is between having the phones output in the control room section, or in the hardware output section. Is it possible to have different mixes for every headphone ?
Great video! Under what circumstances would you use multiple Workspaces?
Generally when you need more than 8 snapshots.
Total mix fx, total mix fx, totalmix fx!
Excellent, thank you!
You're welcome!
Hello everyone, I have one question. I use Logic Pro and RME babyfacePRO. I hear the sound of the instrument "clean" and when I choose some presets the sound doesn't change at all with means the signal im hearing is the clean input. If I recorde something then press play the sound I hear is the sound with the desired effect. What I would like: to hear the desired effect while im playing/recording. In my old Mac that used to happen - plug and play - but then I purchased a new one and since then I have this issue. Can you please enlighten me? Thank you so much and congrats for your channel.
On Totalmix FX I don't have the layout presets 'basic, standard, clear ADAT" - how do you get these? Or how do you clear channels?
Why is that ticking and padding soundscape in the background. Great lectures by the way :)
Hey thanks for this video.Just need some help.I have a condenser mic that i have connected to input 1 of my Babyface Pro.When i record arm my audio channel , i can see the signal in the track but can't hear anything out.But in Total Mix when i raise the fader for hardware input one (my mic) assigned to PH 3/4 , i can hear it through total mix but not through Logic.Could you please help me out ?
Your Videos are excellent, do you have any more advanced videos on total mix available thanks
Did you see these already?: ruclips.net/p/PL0QKeSpeDQwHGxAhD-cJSIBZC7_en5rck
Love all these videos, dude talks so laid back though.. have to watch at 1.75 speed to get it to seem normal speed lol.
Next time, I'll be faster ;-)
@@RMEAudio don't change for anyone, we wouldn't have you any other way!
Laid and quiet. Proper LUFS for YT doesn't matter, yeh?
Hello there, how i can erase a Snapshot? Thanks for your help.
Yes. question one. Why does my display not look like yours!? First button you click in "snap shots" does not exist on my display. Game over right there
How do I get a Headphone added to the Control Room?
Thanks 🙏
You‘re welcome :)
I continually ask for this assistance. PLEASE do a begnner's video on recording real instruments like guitar. I've worked out how to record aurio via xlr, but I just can't get the rme to record electric guitars that I input directly.I've had my rme babyface all year and probably devoted 80-100 to this frustration. Every time I try I just surrender and use my old Yamaha cubase. Please help me.
You need to activate the "instr" switch in the input channel 2 in Totalmix FX. If this doesn't work, please contact our support at support@rme-audio.de
Hi ! I'm UFX+ user , I also have ARC.
I would like to know what would be the best to integrate two subwoofers with our speakers in totalmix.
I would like to have option 1 - just stereo monitors,
And option 2 - stereo monitors (high passed with totalmix eq) + two subwoofers which will play in stereo as an extension of L and R channel, of course linked so I can control the volume of the whole system. I won't be going from main UFX+ outs to subs and then from subs to monitors, since the subs doesn't have balanced connections, would like to hook the subs on separate channels.
Can that be done with snapshots and have the ARC setup for fast switching between the two options ?
Thanks
Yes you can save the different setups as snapshots and load them via the ARC USB. The subwoofers can be connected via further analog outputs and controlled as a fader group. You can program the buttons of the ARC in TotalMix FX under "Options" - "ARC & Key Command Settings".
@@RMEAudio As I thought thanks !
@@RMEAudio One more question please, so I did everything with dual subwoofers, and everything works perfectly, it just seems that snapshots don't override groups ?
For example I want Snapshot 1 to have a group of Main Out on Channels 1/2, and Output Channel 3/4 fader linked in a balance -3db to the Main in that way when I have Main Out set at -6, that Ch Out Fader 3/4 follows at -9 so on...
But I want Snapshot 2 to have fader group again consisted of Main Out (Ch 1/2) and Fader Ch 3/4 but this time I want Ch 3/4 to follow with the -6db Offset.
Is this possible, to setup that way that every time I call a snapshot faders that are grouped with Main Out adjust its relative levels to the Main Out accordingly ?
Thanks
@@janmagdevski4973 In this case you have to save your settings as a workspace (quick select menu "W"), because snapshots don´t change fader groups settings.
Does the Snapshot file save one snapshot or the 8 snapshot slots? Does the Workspace file save one Workspace or the whole Workspace menu? In which cases would a Snapshot file be more useful than a Workspace file?
The snapshot loads one snapshot, for example one you do not use very often. The Workspace file saves also the Workspace menu.
Snapshots include all mixer settings, but no graphical elements like window positions, window size, number of windows, visible EQs or Settings, scroll states, Presets etc. Only
the state wide/narrow of the channels is registered. Moreover the Snapshot is only temporarily
stored. Loading a Workspace causes the loss of all stored Snapshots, when these all had not
been saved before in a Workspace, or separately via File / Save Snapshot as. Via File / Load
Snapshot the mixer states can be loaded individually.
@@RMEAudio Wow that was fast, thank you! I don't have my interface with me to try stuff so I'm still not fully getting it - sorry! I didn't get it when I read the manual for that section either ;) I will do some experimenting and maybe get back with questions. A suggestion: the manual is lacking a clear explanation of Workspaces, they don't even have their own section. Still don't know if saving a Workspace/Snapshot to a file saves all the stored Workspaces and the Snapshots menu or only whatever is active at that moment.
@@stormymondays A Workspace contains all 8 Snapshots. If you have multiple Workspaces, each one should be saved to a file individually for backup purposes.
@@RMEAudio Still trying to wrap my head around why I would save a workspace over a snapshot and vice versa. Let's say I have two projects in my studio, one overdub project, with one or two inputs at a time, and the second, a full band session with a lot of inputs and completed routings. Would it be best to save those two projects as independent workspaces or independent snapshots. Why would I use one over the other? Thanks so much.
@@MarkElliottcreative Snapshots include all mixer settings, but no graphical elements like window positions, window size, number of windows, visible EQs or Settings, scroll states, Presets etc. Only
the state wide/narrow of the channels is registered.
In your case I recommend save as Workspace. By pressing "W" you can open the Workspace quick select menu with 30 slots.
how to delate snapshots or layouts
Warum zeigt ihr ständig den Moderator? Der spielt GAR keine Rolle, den will ich nicht sehen! Das Totalmix Fenster muss IMMER gezeigt werden. Das wäre nützlicher. Trotzdem Danke für die Mühe, das Video zu erstellen.
You'd think such a high quality equipment company would have hired somebody with a little more charisma and good presentation skills. This guy is a snooze fest and he does not explain this stuff well at all.